Sony STR-DE535: AC Hookups Before You Use Your Receiver

AC Hookups Before You Use Your Receiver: Sony STR-DE535

Getting Started

AC Hookups

Before You Use Your Receiver

Connecting the mains lead

Before turning on the receiver

Connect the mains lead from this receiver and from

Make sure that you have:

your audio/video components to a wall outlet.

Turned MASTER VOLUME to the leftmost

If you connect other audio components to the

position (0).

SWITCHED AC OUTLET on the receiver, the receiver

Selected the appropriate front speakers (see “Front

can supply power to the connected components so you

Panel Parts Description” on page 12).

can turn on/off the whole system when you turn on/

Set BALANCE to the centre position.

off the receiver.

SWITCHED AC OUTLET

Clearing the receiver's memory

Before you use your receiver for the first time or when

you want to clear the receiver's memory, do the

procedure below:

1/u (power)

DIMMER

/

to a wall outlet

Caution

Make sure that the power consumption of the component

connected to the receiver’s AC outlet does not exceed 100

watts. Do not connect high-wattage electrical home

appliances such as electric irons, fans, or TVs to this outlet.

MUTING

Where do I go next?

1 Turn off the receiver.

Before you use the receiver, go to the next section to make

2 Press 1/u (power) for more than 4 seconds.

sure that all the controls are set to the appropriate positions.

“ALL CLEAR” appears in the display and the

items including the following are reset or cleared:

All preset stations are reset to their factory

settings.

All sound field parameters are reset to their

factory settings.

All index names (of preset stations and

programme sources) are cleared.

All adjustments made with the SET UP button are

reset to their factory settings.

• The sound field memorized for each programme

source and preset station is cleared.

After turning on the receiver

Check the following indicator:

Press MUTING or MUTING on the remote if the

MUTING indicator turns on.

Press DIMMER to set the display at any of four levels

of brightness.

GB

9

Оглавление