Panasonic AW-RP555: Setting and changing the camera menu items

Setting and changing the camera menu items

Setting procedure

1. Keep pressing the MENU/ button for two seconds.

The menu mode is established, and the on-screen menus of the camera in the pan/tilt

head system currently selected are displayed. At this point, the MENU/

button lamp

remains lit.

If the MENU/

button is held down for at least two seconds while the MENU/ button

lamp is lit, the menu mode is exited, and the on-screen menus can be closed.

2. When the unit is in MENU mode, the MENU/

button, ITEM/ button, YES/ button

and NO/ button correspond to the 4 switches on the back of the convertible camera

as shown below. The MENU is operated using these buttons.

MENU/ .......MENU

ITEM/ .........ITEM/AWC

YES/ .........YES/ABC

NO/ ..........NO/BAR

For details about MENU operations, refer to the operating instructions of the camera.

3. Upon completion of the settings, keep pressing the MENU/

button for two seconds to

exit the menu mode. The on-screen menus are now cleared, and the MENU/

button

lamp goes off.

Do not close the on-screen menus by performing menu operations.

If the menus have been closed by mistake, keep pressing the MENU/

button for at

least two seconds to turn off the MENU/

button lamp.

37 (E)