Panasonic ES4029: инструкция

Operating Instructions

Rechargeable Shaver

Model No. ES4029

English 2

Português 37

Magyar 72

Deutsch 7

Norsk 42

Română 78

Français 12

Svenska 47

Русский 83

Italiano 17

Suomi 52

Türkçe 88

Nederlands 22

Polski 57

Українська 93

Español 27

Česky 62

Қазақша 98

Dansk 32

Slovensky 67

Before operating this unit, please read these instructions completely.

English

2



Cleaning the shaver

Important

Warning - Remove the shaver from the charging adaptor before

cleaning it to prevent electric shock.



Before use

Keep both the inner blades inserted. If only one of the inner

This WET/DRY shaver can be used for wet shaving with shaving

blades is inserted, the shaver may be damaged. If you clean the

lather or for dry shaving. You can use this watertight shaver in

shaver with water, do not use salt water or hot water. Do not

the shower and clean it in water. The following is the symbol of

soak the shaver in water for a long period of time. Wipe it with a

Wet shaver. The symbol means that the hand-held part may be

cloth dampened with soapy water. Do not use thinner, benzine

used in a bath or shower.

or alcohol.



Storing the shaver

Disconnect the charging adaptor when storing the shaver. Do

not bend the power cord or wrap it around the shaver. This

appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

Treat yourself to wet lather shaves for at least three weeks and

experience and knowledge, unless they have been given

notice the difference. Your Panasonic WET/DRY shaver requires

supervision or instruction concerning use of the appliance by a

a little time to get used to because your skin and beard need

person responsible for their safety. Children should be

about a month to adjust to any new shaving method.

supervised to ensure that they do not play with the appliance.



Using the shaver

Keep these operating instructions in a safe place.

Caution - The outer foil is very thin and can be damaged if not

used correctly. Check that the foil is not damaged before using

the shaver. Do not use the shaver if the foil etc. is damaged as

SPECIFICATIONS

you will cut your skin.

Power source: 220-240 V AC, 50-60 Hz



Charging the shaver

Motor voltage: 1.2 V DC

Do not use any charging adaptor other than one specifically

Charging time: 8 hours

designed for this model (RE7-52). Plug in the adaptor into a

This product is intended for household use only.

household outlet where there is no moisture and handle it with

Airborne Acoustical Noise:

dry hands. The shaver may become warm during use and

In shaving mode: 65 (dB (A) re 1 pW)

charging. However, this is not a malfunction. Do not charge the

In trimmer mode: 66 (dB (A) re 1 pW)

shaver where it will be exposed to direct sunlight or other heat

sources. Hold the adaptor when disconnecting it from the

household outlet. If you tug on the power cord, you may damage

it. If the supply cord of the charging adaptor is damaged, the

entire charger should be discarded.

Adequate ambient temperature for charging is 0-40 °C.

Parts identification

Charging

Charge

Perform the following steps to charge the shaver if it seems to lose

the speed.

You can fully charge the shaver in 8 hours.

•

A full charge will supply enough power for approx. 7 shaves of 3

minutes each.

Turn off the shaver and insert it

1

1

in the charging adaptor as

illustrated.

Plug in the adaptor into a

2

2

household outlet.

•

The charge indicator lamp glows red and

a Protective cap

5 Switch lock button

stays on until the shaver is removed from the

b Outer foil section

6 OFF/ON switch

charging adaptor.

1 System outer foil

7 Trimmer

2 System outer foil release

8 Trimmer handle

buttons

e Charging adaptor (RE7-52)

3 Foil frame

9 Charge indicator lamp

c Inner blades

F Travel pouch

d Main body

G Cleaning brush

4 Foil frame release buttons

English

4

Using the shaver

Shave

Cleaning

Clean

1. Remove the shaver from the

charging adaptor.

2. Apply some hand soap to the

outer foil.

3. Turn the shaver on and then

pour some water over the

outer foil.

4. Turn the shaver off after 10-

20 seconds.

Depress the

Hold the shaver as

1

1

2

2

5. Remove the outer foil section

switch lock button

illustrated above and

and clean it with running

and slide the OFF/

shave.

water.

ON switch

6. Wipe off any drops of water

upwards.

with a dry cloth.

7. Remove the protective cap to

•

Start out shaving by applying gentle pressure to your face.

allow it to dry completely.

Stretch your skin with your free hand and move the shaver

back and forth in the direction of your beard. You may gently

increase the amount of pressure as your skin becomes

accustomed to this shaver. Applying excessive pressure does

not provide a closer shave.



Using the trimmer

Slide the trimmer handle up. Place

at a right angle to your skin and

move downwards to trim your

sideburns.

Replacing the system outer foil and the inner

blades

system outer foil once every year

inner blade once every two years

Replacing the system outer foil

1. Press the system outer foil

release buttons and lift the

system outer foil upwards as

illustrated.

2. Insert the system outer foil by

pushing it downwards until it

clicks.

Replacing the inner blades

1. Press the foil frame release

buttons and lift the outer foil

section upwards as illustrated.

2. Remove the inner blades one

at a time as illustrated.

•

Do not touch the edges

(metal parts) of the inner

blades to prevent injury to

your hand.

3. Insert the inner blades one at

a time until they click as

illustrated.

Cleaning with the brush

1. Clean the inner blades using

the short brush by moving it in

direction.

Clean the system outer foil,

the shaver body and the



trimmer using the long brush.

•

Do not use the short brush to

clean the outer foils.

Removing the built-in rechargeable battery

Remove the built-in rechargeable battery before disposing of the

shaver. Please make sure that the battery is disposed of at an

officially designated location if there is one. Do not dismantle or

replace the battery so that you can use the shaver again. This



could cause fire or an electric shock. Replace it at an authorized

service center.

Remove the shaver from the charging adaptor when removing

the battery.

Perform steps 1 to 6 and lift the battery, and then remove it.

•

•

For environmental protection and recycling of materials

This shaver contains a Nickel-Metal Hydride battery.

Please make sure that the battery is disposed of at an officially

assigned location, if there is one in your country.