Panasonic TYST65VX100: инструкция

TY-ST65VX100

Model No.

TQZJ053

Installation Instructions

Pedestal for Plasma Display

Before commencing work, carefully read these Instructions and the 

Manual for the plasma display to ensure that fitting is performed correctly.

(Please keep these instructions. You may need them when maintaining or 

moving.)

English

Installationsanleitung

Sockel für Plasmadisplay

Vor der Ausführung lesen Sie bitte diese Anleitung und die 

Bedienungsanleitung für das Plasmadisplay sorgfältig durch, damit die 

Anbringung richtig ausgeführt wird.

(Bitte bewahren Sie diese Anleitung auf. Sie kann bei der Wartung oder 

der erneuten Anbringung der Halterung benötigt werden.)

Deutsch

Installatiehandleiding

Vloerstandaard voor plasmascherm

Lees deze installatiehandleiding en de bedieningshandleiding 

voor het plasmascherm zorgvuldig door voordat u begint, zodat de 

montagewerkzaamheden op de juiste wijze worden uitgevoerd.

(Bewaar deze handleiding. U hebt de handleiding weer nodig bij 

verwijdering of verplaatsing.)

Nederlands

Istruzioni per I’installazione

Piedistallo per lo schermo al plasma

Prima di iniziare il montaggio leggere attentamente queste istruzioni ed 

il manuale dello schermo al plasma per poter procedere al montaggio in 

modo corretto.

(Conservare poi queste istruzioni che si renderanno necessarie per la 

manutenzione e l’eventuale spostamento della staffa.)

Italiano

Instructions d’installation

Piédestal pour l’écran plasma

Avant de commencer le travail, lisez attentivement ces instructions ainsi 

que le mode d’emploi de l’écran plasma de manière à réaliser un montage 

convenable.

(Conservez soigneusement les présentes instructions. Vous pouvez en avoir 

besoin pour effectuer un entretien ou si vous désirez déplacer le piédestal.)

Français

Instrucciones de instalación

Pedestal para pantalla de plasma

Antes de empezar el trabajo, lea atentamente estas instrucciones y el 

manual de la pantalla de plasma para asegurar una instalación correcta.

(Guarde estas instrucciones. Podrá necesitarlas cuando haga trabajos de 

mantenimiento o mueva el soporte.)

Español

Monteringsanvisningar

Bottenplatta för plasmaskärm

Innan arbetet påbörjas ska du noga läsa dessa anvisningar och 

bruksanvisningen som medföljer plasmaskärmen för att försäkra att 

arbetet utförs på rätt sätt.

(Bevara dessa anvisningar. Du kan behöva anlita dem på nytt för 

underhåll eller flyttning av hållaren.)

Svenska

Monteringsvejledning

Sokkel til plasmaskærm

Før arbejdet påbegyndes, skal De omhyggeligt læse disse instruktioner 

og betjeningsvejledningen til plasmaskærmen for at sikre at 

opsætningsarbejdet udføres korrekt.

(Gen disse instruktioner. De kan få brug for dem ved vedligeholdelse, eller 

hvis ophænget skal flyttes.)

Dansk

Инструкция

по

установке

Подставка

для

плазменного

дисплея

Перед

проведением

работ

внимательно

прочитайте

эту

Инструкцию

и

Руководство

для

плазменного

дисплея

, 

чтобы

убедиться

в

том

, 

что

установка

выполняется

правильно

.

(

Сохраните

, 

пожалуйста

, 

эту

инструкцию

. 

Она

может

Вам

понадобиться

для

технического

обслуживания

или

перемещения

.)

Ру

сский

Інструкції

з

встановлення

Підставка

для

плазмового

дисплея

Перед

початком

робіт

уважно

прочитайте

ці

інструкції

та

інструкції

з

експлуатації

плазмового

дисплея

, 

аби

забезпечити

правильний

монтаж

.

(

Збережіть

ці

інструкції

, 

оскільки

вони

можуть

знадобитись

Вам

, 

коли

виникне

необхідність

у

технічному

обслуговуванні

або

встановленні

в

іншому

місці

.)

Українськ

а

■

 WARNING

Do not install in a location that cannot support the entire load.

• 

If the pedestal is not installed correctly, the Plasma Display may fall over and become damaged, and personal 

injury may result.

Do not disassemble or modify the pedestal.

• 

Otherwise the unit may fall over and become damaged, and personal injury may result.

■

 CAUTION

Do not use any display other than those given in the catalogue.

• If this is not done, the unit may fall over and become damaged, and personal injury may result.

Do not climb up onto the pedestal or use it as a step. (Young children should be made particularly aware of 

this caution.)

• If the unit falls over or becomes damaged through misuse, injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

• If you use the pedestal whilst it is physically damaged, personal injury may result.

Set up on a stable, level surface.

• If this is not done, the unit may fall over and become damaged, and personal injury may result.

Keep the unit away from direct sunlight and heating equipment.

• Failure to do so may result in warping, deformation, or degradation of materials, and a loss of strength that may 

cause the equipment to fall over or break and cause injury.

During setting-up, make sure that all screws are securely tightened.

• If suf

fi

  cient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be 

strong enough to support the Plasma Display, and it might fall over and become damaged, and personal injury may 

result.

Use the accessory parts for fall-prevention to secure the Plasma Display.

• If the unit is knocked or children climb onto the pedestal with the Plasma Display installed, the Plasma Display may 

fall over and personal injury may result.

When installing or removing the plasma display and pedestal, ensure that the work is done by at least three 

persons.

• If more than three people are not present, the display may be dropped, and personal injury may result.

Leave a space of at atleast 10 cm (3.9 inches) at the top, left and right, and at least 7 cm (2.8 inches) at the 

rear, and keep the space between the bottom of the display and the 

fl

 oor surface.

• Do not cover the air inlet holes and air outlet holes, or a 

fi

 re may result.

■

 Notes on handling

1) If the unit is placed in direct sunlight or next to a stove, the light and heat may cause discoloration or deformation.

2) Cleaning

   Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to 

which a small amount of neutral detergent has been added, and then wipe with a dry cloth.

   Do not use products such as solvents, thinner or household wax for cleaning, as they can damage the surface 

coating.

   (If using a chemically-treated cloth, follow the instructions supplied with the cloth.)

3) Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty.

■

 Notes on installing the pedestal

• Insert the mains plug into a mains socket which is close and easily accessible for the plasma display.

• Provide adequate ventilation so that the temperature around the display does not rise above 40°C (104 °F). If there 

is insuf

fi

 cient movement of the air inside the display, heat may build up inside the display and 

fi

 re may result.

Precautions with regard to setting up

2

English

Assembling the pedestal

1

  Place the stand base so that it is 

fl

 at.

To prevent damage to the stand base, place it on a 

fl

 at 

fl

 oor or on a stand.

2

  Attach and secure the stand pins.

 (1) 

Insert the two stand pins 

 into the top of the 

stand base 

.

   • 

The stand pins 

 have a front and back.

 (2) 

Firmly secure the stand pin 

fi

 xing screws 

into bottom screw hole of the stand base 

.

A

G

A

D

D

Front

Bottom 

screw hole

PROFESSIONAL INSTALLATION IS REQUIRED.

PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH 

RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING.

Parts for assembly 

(Be sure to check the parts before assembling)

3

English

  Stand pin 

fi

 xing screws (2)

     M8 × 30

  Stand pole 

fi

 xing screws (2)

Stand pole display 

fi

 xing screws (4)

 Clampers (2)

 Stand pins (2)

 Stand poles (2)

 Stand base (1)

  Fixing pins (4)

 Light-blocking panel (1)

     M8 × 60