Panasonic TYST65VX100: 1

B

F

B

B

Attaching the pedestal to the display

For setting up the pedestal, refer to the operating instructions of plasma display.

Rear

Attaching the light-blocking panel

1

   Prepare the light-blocking panel.

 (1) 

Place the light-blocking panel 

 with the cloth 

sheet facing upward.

 (2) 

Fold over the portion of the panel with notches 

and holes in it along the crease. (See illustration.)

H

2

1

D

F

H

H

Notch

Front

H

C

2

1

2

   Attach and secure the light-blocking 

panel.

 (1) 

Slightly bend the light-blocking panel to form 

a U-shape and 

fi

 t the ends into the gaps (right 

and left) between the stand pins and the plasma 

display. Align the notches in the light-blocking 

panel with the stand pins.

•  The cloth sheet side should be facing the rear 

panel of the plasma display.

 (2) 

Align the four holes in the light-blocking panel 

with the holes in the stand base, insert the (four) 

fi

 xing pins 

, and push down hard on the tops of 

the 

fi

 xing pins to lock them in place.

Cloth sheet

1

   Attach the plasma display to the 

pedestal.

  Arrow marks are displayed on the back cover at the 

locations shown below.

Align the stand pins 

 with these arrows, and install 

the plasma display.

2

  Attach the stand poles.

 (1) 

Insert the two stand poles 

 into the stand base 

 from the rear of the plasma display, and then 

use the stand pole 

fi

 xing screws 

 to secure the 

stand poles 

.

  •  The stand poles 

 have a front and back.

 (2) 

Use the four stand pole display 

fi

 xing screws 

 to 

secure the stand poles 

 and plasma display.

4

English