Panasonic ER1610: инструкция

Operating Instructions

AC/Rechargeable Professional Hair Clipper

Model No. ER1610

English 2

Português 37

Magyar 72

Deutsch 7

Norsk 42

Română 78

Français 12

Svenska 47

Русский 83

Italiano 17

Suomi 52

Türkçe 88

Nederlands 22

Polski 57

Українська 93

Español 27

Česky 62

Dansk 32

Slovensky 67

Before operating this unit, please read these instructions completely.

English

2



Cleaning the clipper

Important

•

Clean the housing using only a cloth slightly dampened with

water or a mild soap solution.



Before use

•

Never use a caustic solution.

This clipper is designed for professional use to trim hair and

•

Never submerge the clipper in water.

beards. Charge it for 8 hours before use for the fist time in order to

activate the built‑in rechargeable batteries. It can be operated on



Storing the clipper

either an AC adaptor or rechargeable batteries. Read all

•

This appliance is not intended for use by persons (including

instructions carefully before use.

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given



Charging the clipper

supervision or instruction concerning use of the appliance by a

•

Use the ER1610 hair clipper with the RE5‑83 adaptor only.

person responsible for their safety. Children should be supervised

•

Avoid charging the batteries at temperatures below 5 °C or

to ensure that they do not play with the appliance.

above 35 °C.

•

Never tamper with moving parts.

•

Avoid charging the batteries in direct sunlight or near a radiating

•

Avoid grabbing the clipper by the power cord, as it may become

heat source.

detached, causing damage or injury.

•

The recharge ( ) lamp may blink at an early stage when it is

•

If the clipper is not working properly, have it inspected at an

used for the first time or if it has not been used for 6 or more

authorized service center.

months even if it is fully charged. This is not a malfunction.

•

Even though the clipper may not be used for an extended period,

Specifications

charge every 6 months to preserve battery life.

Power source: 230 V AC, 50 Hz

•

The power cord cannot be replaced. If it is damaged, the AC

Motor voltage: 2.4 V DC

adaptor should be discarded.

Charging time: 1 hour



Using the clipper

Airborne Acoustical Noise: 60 (dB (A) re 1 pW)

•

Warning ‑ Keep the appliance dry.

•

The clipper may become warm during operation and/or charging.

READ ALL INSTRUCTIONS BEFORE USE.

This is normal.

•

Check that the blades and the attachments are not damaged

before use. Replace them if they are damaged.

•

You should not allow permanent wave lotion, hair restorer or hair

spray to come into contact with the main body or the blades.

Doing so may result in cracking, discoloring or corrosion.

•

You should not drop the clipper on the floor.

•

You should not knock the blades and the attachments against

hard objects.

•

You should not trim the hair of a pet.

English

3

Parts identification

Charging the hair clipper

Charge

Charge the clipper when recharge ( ) lamp starts to blink. It can

be used for approximately 5 minutes after the recharge ( ) lamp

blinks.

Connect the power

1

1

cord to the charging

stand.

Press the OFF/ON

2

2

switch to turn off the

power.

Place the clipper on

3

3

A Main body

C Short comb attachment

the charging stand and

1 Trimming height indicator

(3 mm/4 mm)

plug in the adaptor

2 OFF/ON switch

D Medium comb attachment

into a household

3 Dial (Height adjustment

(6 mm/9 mm)

control)

E Long comb attachment

outlet.

4 Recharge ( ) lamp

(12 mm/15 mm)

•

Charge status ( ) lamp glows and charging starts.

5 Charge status ( ) lamp

F AC adaptor (RE5‑83)

•

Charging is completed when Charge status ( ) lamp

6 Appliance socket

; Power cord

blinks. (Max. 1 hour later)

B Blade

 Appliance plug

•

1 full charge will provide approximately 50 minutes of

7 Mounting hook

G Cleaning brush

continuous operation.

8 Cleaning lever

H Oil

9 Moving blade

 Charging stand

 Stationary blade

 Comb attachment shelves

 Charging plug

 Socket

English

4



Charging without the charging stand

1. Press the OFF/ON switch to turn off the

power, and insert the appliance plug into

Cut

Using the hair clipper

the clipper.

2. Plug in the adaptor into a household

Turn the dial clockwise or counterclockwise to

outlet.

adjust the moving blade back and forth to get the

desired height. Adjustable in 5 stages from 0.8 mm

to 2.0 mm in 0.3 mm steps without attachments.



AC operation

If you connect the AC adaptor to the clipper in the same way as for

charging, and turn on the power, you can use it even if the battery

capacity is low.

•

If the clipper does not operate, charge the clipper for

approximately 1 minute.

•

Be careful not to discharge the battery completely with the power

left turned on. It results in shortening the battery life.

Using the comb attachments

Select the trimming heights

1

1

indicated on the insides and

sides of the attachments.

Set the dial to “0.8” and then

2

2

mount the attachment to the

clipper as illustrated.



Removing the attachment from the clipper

Slide one side of the attachment off the

mounting in direction indicated with the arrow.