Panasonic AW-RC600: Connections

Connections

 Before proceeding with the connections, ensure that the power to all the devices is off.

 Be absolutely sure to use the AW-CA50A26 RCU cable to connect the RCU to the camera.

 When extending the cable, use the extension-use studio cable (WV-CA26U15, WV-CA26U30 or WV-CA26U100) and

extension-use joint connector (WV-CA26T26).

 The maximum length to which the cable can be extended is 300 m (for a camera body and lens).

When using the studio card (AW-PB305) and attaching a viewfinder, it can be extended up to 100 m.

 When the power switch of the RCU is set to ON, the power indicator LED lights up, and the camera is controlled from the

RCU.

Live switcher

AW-SW350

TALLY&INCOM

TALLY&INCOM cable

VIDEO IN (S-VIDEO)

S-VIDEO cable

To VIDEO IN

BNC coaxiale cable

To PGM OUT or PVW OUT

BNC coaxiale cable

To BB OUT

BNC coaxiale cable

AC adapter

AW-PS505A

Headset

AC 220 to 240 V

Headset

Remote control unit

Headset

AW-RC600

50-pin connector

RCU cable

of camera

AW-CA50A26

To RGB monitor, etc.

AC 220 to 240 V

Supplied AC cable

Convertible camera + lens +

electronic viewfinder

The AW-PB305 studio card and viewfinder installation bracket are

required to connect an electronic viewfinder to a convertible camera.

Notes:

 When the R/G/B, Y/PR/PB and Y/C signals are used, select the required signals using the camera’s menu.

 When using the S-Video signals, select Y/C using the camera’s menu. Furthermore, use either the S-Video connector or

BNC connectors, and leave the other connectors unconnected.

The S-Video connector and BNC connectors cannot be used at the same time.

 Connect either the VIDEO OUT BNC connector or S-Video connector to the AW-SW350 live switcher.

 Use an intercom headset suited to all the devices.

 Fabricate the TALLY & INCOM cables without mixing up the signals.

11 (E)