Panasonic U50PE1E5: INSTALLATION LOCATION

01_85464609230020_EN.fm Page 3 Thursday, December 27, 2012 4:22 PM

INSTALLATION LOCATION

• We recommend that this air conditioner be installed properly by qualified installation

technicians in accordance with the Installation Instructions provided with the unit.

• Before installation, check that the voltage of the electric supply in your home or office is the

same as the voltage shown on the nameplate.

• Do not install this air conditioner where there are fumes or flammable gases, or in an

extremely humid space such as a greenhouse.

• Do not install the air conditioner where excessively high heat-generating objects

are placed.

Avoid: To protect the air conditioner from heavy corrosion, avoid installing the outdoor unit where

salty sea water can splash directly onto it or in sulphurous air near a spa.

ELECTRICAL REQUIREMENTS

1. All wiring must conform to the local electrical codes. Consult your dealer or a qualified

electrician for details.

2. Each unit must be properly grounded with a ground (or earth) wire or through the supply

wiring.

3. Wiring must be done by a qualified electrician.

To warm up the system, the power mains must be turned on

Power mains

at least five (5) hours before operation. Leave the power

ON

mains ON unless you will not be using this appliance for an

extended period.

NOTE

Pull off the power plug from a receptacle, or switch off the breaker, or switch off the power

disconnecting mean to isolate the air conditioner from the main power supply when not in use

for a long time.

3