Panasonic U50PE1E5: ADJUSTING AIRFLOW DIRECTION FOR MULTIPLE INDOOR UNITS USING SINGLE REMOTE CONTROLLER (WIRED)

ADJUSTING AIRFLOW DIRECTION FOR MULTIPLE INDOOR UNITS USING SINGLE REMOTE CONTROLLER (WIRED): Panasonic U50PE1E5

01_85464609230020_EN.fm Page 10 Thursday, December 27, 2012 4:22 PM

ADJUSTING AIRFLOW DIRECTION FOR MULTIPLE

INDOOR UNITS USING SINGLE REMOTE

CONTROLLER (WIRED)

The airflow direction cannot be set using the remote controller for the concealed duct type

(F1, N1).

If multiple indoor units are connected to a remote controller, the airflow direction can be set

for each indoor unit by selecting the indoor units (see the operation below).

Auto Flap ( ) button

To set the airflow for individual units, press the UNIT button. Display shows the indoor unit

number under group control. Set the airflow direction for the indoor unit that is shown on the

display.

Each time UNIT is pressed, the indicator changes in the order shown below.

When nothing is displayed, you can make the setting for all indoor units in one operation.

The unit number is displayed as Outdoor Unit Number–Indoor Unit Number. It varies

depending on the number of units under group control.

One outdoor unit and eight indoor units Two outdoor units and four indoor units

Unit

Unit

Unit

Unit

Unit

Unit

No display

Unit No.

Unit No.

Unit No.

Unit No.

No

No.

No.

No.

No.

No.

No.

1–1

1–2

1–3

1–8

display

1–1

1–2

1–3

1–4

2–1

2–4

10

Оглавление