Panasonic DMWMCTZ40E: 1 Turn the camera on. 2 Display the scene mode menu and then set [Underwater].

DMW-MCTZ35&40_PP&E-VQT4V81.book 16 ページ ２０１３年１月７日　月曜日　午後２時７分

∫ Attaching the weights

About using the weights

Attach the weights to adjust to the preferred buoyancy when using the marine

case. Use them as necessary.

Refer to the following about buoyancy underwater.

1 If you use the digital camera and the marine case only:

They will float slowly in fresh water or seawater. (Plus buoyancy)

2 If you use the digital camera, the marine case and 1 weight:

They will float even more slowly in fresh water or seawater than 1. (Plus

buoyancy)

3 If you use the digital camera, the marine case and 2 weights:

They will sink slowly in fresh water or seawater. (Minus buoyancy)

How to attach the weights

If you use 1 weight, align the protruding part of

the weight with the tripod receptacle on the

marine case and then using a slotted

screwdriver or similar, use the supplied

weights attachment screw to attach to the

tripod receptacle.

If you use 2 weights, align the projecting part

of the second weight with the indented part of

the first weight so that the weights do not

overlap and then attach them to the tripod receptacle.

Taking Pictures

∫ Be sure to check the following before entering the water

Check the following before diving.

• Is there sufficient remaining battery power?

• Is there sufficient memory in the card?

• Is the O-ring fitted evenly into the O-ring groove?

• Have you checked that no water leaks into the Case?

• Is the buckle closed firmly?

∫ Taking pictures

1 Turn the camera on.

2 Display the scene mode menu and then set [Underwater].

16

VQT4V81 (ENG)