Panasonic TYWK42PV4W: Components

3

English

3

TY-WK42PV4W 

Wall-hanging bracket (Vertical mounting type)

㇙

Wall-hanging bracket (1)

㇜

Allen wrench (included tool) (1)

㇝

Unit fastening screws (2)

M5x35

㇚

Insulation spacers (4)

㇛

Dished toothed washers (4)

㇞

Allen head countersunk screws (4) 

M8x60

㇟

Allen head countersunk screws

(4) 

M8x32

Precautions for wall-hanging bracket fitting

♦

  Installation and removal work must be carried out only by a qualified technician.

If the unit is installed or removed improperly, the display may fall down and personal injury may result.

♦

  The wall-hanging bracket is for use in attaching a plasma TV unit to a vertical wall for viewing. Do not fit to 

any surface other than a vertical wall.

♦

  The equipment has a lock mechanism on the left side, so provide at least 300 mm of space from the wall 

surface.

♦

 To ensure correct plasma TV performance and prevent trouble, do not fit at any of the following locations.

  • Near sprinklers or fire/smoke detectors

  • Where there is a risk of exposure to vibration or impact

  • Near high-voltage wires or dynamic power supplies

  • Near sources of magnetism, heat, water vapor or soot

  • Locations exposed to air blown from heating equipment

  • Where droplets of condensation from an air conditioner or other unit may form.

♦

 Fit using techniques suited to the structure and materials of the fitting location.

♦

  Use commercially available screws with a nominal diameter of 6 mm that are suited to the wall material 

(wood, steel frame, concrete etc.) you are fitting the bracket to.

♦

 For the TV power supply plug, use a power supply outlet that can be reached easily.

♦

  Ensure good air flow so that the equipment ambient temperature does not exceed 40 °C. Failure to do this 

may cause heat to build up inside the plasma TV, resulting in malfunction.

♦

  Spread a soft blanket or cloth over the floor so that the plasma TV and floor will not be marked or scratched 

during the assembly and installation work.

♦

  When screwing down the parts, ensure that the screws are neither insufficiently tightened nor over tightened.

♦

  Take sufficient care to ensure safety around you when performing the assembly and installation work or while 

moving about during the course of the work.

♦

  Do not install the Plasma TV underneath ceiling lamps (spotlights, halogen lamps, etc.). Otherwise, the 

cabinet may be bent or damaged by high heat.

Components

[ The images shown in this manual 

are for illustrative purpose only.]

TY-WK42PV4W̲TQZH997-2̲4048.indb   3

TY-WK42PV4W̲TQZH997-2̲4048.indb   3

2008/04/04   17:11:01

2008/04/04   17:11:01