Panasonic SC-SP100: Connecting to the PC Using other equipment

Connecting to the PC

Using other equipment

While the iPod or iPhone is connected to the main unit, you can

Preparation

transfer data from the PC using the USB connectivity.

• Ensure that the iPod or iPhone is not connected to the main unit.

• Ensure that the other equipment is completely set up and its volume

reduced before connecting to the main unit.

ENGLISHESPAÑOLENGLISH

Rear view

Portable audio equipment

Rear view

(not included)

Audio cable (included)

Connect the other equipment such as a portable audio equipment, etc.

to the MUSIC PORT using the supplied audio cable.

USB cable (not included)

1 Connect the USB cable to the USB port of the main unit

Avoid interfering with other Panasonic equipment

and PC.

Refer to iPod or iPhone User’s Manual on PC synchronisation.

You can operate this unit using a different mode.

The main unit and remote control must be set to the same mode.

2 Before disconnecting the USB cable, make sure the

procedure of safe eject of hardware from the PC is

1 Press and hold [SURROUND] on the main unit and

performed.

[BASS] on the remote control for at least 3 seconds.

The power indicator fl ashes 3 times confi rming the change.

Recording and operating problems may occur on some computer

2 Press and hold [OK] and [BASS] on the remote control

systems.

Please note that Panasonic and Panasonic dealers cannot be held

for at least 2 seconds.

RQTX1009

liable for any lost data or other direct or indirect damage except in

To return to the default mode, repeat the above steps. For step 2,

cases of intentional or gross negligence.

replace [BASS] with [MUTE].

10

10

RQTX1009-1R_gb_es_pl_cz_ru_ua.in10 10RQTX1009-1R_gb_es_pl_cz_ru_ua.in10 10 7/2/09 5:48:34 PM7/2/09 5:48:34 PM