Panasonic S71PT2E5: Adjusting Airfl ow Direction

Adjusting Airfl ow Direction: Panasonic S71PT2E5

Adjusting Air ow Direction

Adjusting the upward and downward motion of air ow direction (U1 and T2 types only)

Using the timer remote controller

Press / to select your desired air ow direction.

Air ow direction

display

Flap swing motion

Pressing the button during

swing operation can stop the

ap at the desired position.

Display when swing operation

is stopped

Fan and

Cooling and

heating

drying

“FLAP” button

(5 levels) (3 levels)

Using the wireless remote controller

Flap xed (5 levels)

Air ow direction display

“FLAP” button

Recommended vertical air ow direction

Set the ap to the downward position for heating operation.

(With the upward setting, warm air cannot reach the oor.)

Set the ap to the upward position for cooling operation.

(With the downward setting, condensation may drip on to the

oor.)

U1, T2 type

HEAT COOL / DRY FAN

Fixed to this

Recommended

Recommended

position

Adjusting the horizontal air ow direction

(Manual: T2 type only)

Move the

horizontal

air ow vanes

by hand for

adjustment.

6

F569021.indb6F569021.indb6 2013/06/079:37:572013/06/079:37:57

Adjusting air ow direction

for multiple indoor units (Timer remote controller only)

When operating multiple indoor units using 1 remote controller, air ow direction can be adjusted for indoor each unit individually or

all units at the same time.

Unit No.

When setting the air ow direction of

each indoor unit individually

1-1

Press to select the Unit No.

1

for adjustment.

e.g.) 1 outdoor unit

e.g.) 2 outdoor units

and

and

1-2

8 indoor units

4 indoor units

No display

No display

1-3

1-1

1-1

ENGLISH

1-2

1-2

1-4

1-3

1-3

1-4

1-4

“FLAP” button

“UNIT” button

2-1

1-8

1-8

Maximum of

8 indoor units

2-4

can be connected.

Press to select your desired

2

air ow direction.

When setting the air ow direction of

all indoor units at the same time

Press to select

No display

.

1

Press to select your desired

2

air ow direction.

Tips for Energy Saving

Avoid

Attention:

Do not block the air intake and outlet of the unit.

Never use your hands to move the ap (vertical air ow ap)

(If either is obstructed, the unit will not function

controlled using the remote controller.

well, causing malfunction.)

During cooling operation, use sunshades, blinds or cur-

tains to prevent direct sunlight from entering the room.

Note

Do

When the air conditioner is turned off, the ap (vertical air-

Always keep the air lter clean.

ow ap) automatically moves to the downward position.

(A clogged lter will impair the performance of the unit.)

The ap (vertical air ow ap) moves to the upward position

“Maintenance” (P.8)

during standby operation for heating.

To prevent conditioned air from escaping, keep win-

The swing operation starts after the standby operation has

dows, doors and any other openings closed.

nished, but “Swing” is indicated on the remote controller

even during the standby operation.

7

F569021.indb7F569021.indb7 2013/06/079:38:002013/06/079:38:00

Оглавление