Panasonic S60MU1E5A: AdjustingAirowDirection

AdjustingAirowDirection

This section is described in the instruction manual supplied with the timer remote contoller (CZ-RTC2).

Regarding the High-spec Wired Remote Controller (CZ-RTC3), refer to the Operating Instructions supplied with the model CZ-RTC3.

Adjusting the upward and downward motion of airow direction (U1 and T2 types only)



Using the timer remote controller

Press / to select your desired airow direction.

Airow direction

display



Flap swing motion

z

Pressing the button during

swing operation can stop the

ap at the desired position.

Display when swing operation

is stopped

Fan and

Cooling and

heating

drying

“FLAP” button

(5 levels) (3 levels)



Using the wireless remote controller



Flapxed(5 levels)

Airow direction display

“FLAP” button

Recommendedverticalairowdirection

z

Set the ap to the downward position for heating operation.

(With the upward setting, warm air cannot reach the oor.)

z

Set the ap to the upward position for cooling operation.

(With the downward setting, condensation may drip on to the

oor.)

U1, T2 type

HEAT COOL / DRY FAN

Fixed to this

Recommended

Recommended

position



Adjustingthehorizontalairowdirection

(Manual: T2 type only)

Move the horizontal airow vanes

by hand for adjustment.

6

OI_F569617_EU_L.indb 6 2013-12-17 17:57:42

Adjustingairowdirection

for multiple indoor units (Timer remote controller only)



Whensettingtheairowdirectionof

each indoor unit individually

1-1

Press to select the Unit No.

1

for adjustment.

1-2

ENGLISH

1-3

1-4

Press to select your desired

2

airow direction.



Whensettingtheairowdirectionof

all indoor units at the same time

Press to select

No display

.

1

Press to select your desired

2

airow direction.

Tips for Energy Saving



Avoid

Attention:

z

Do not block the air intake and outlet of the unit.

z

Never use your hands to move the ap (vertical airow ap)

(If either is obstructed, the unit will not function

controlled using the remote controller.

well, causing malfunction.)

z

During cooling operation, use sunshades, blinds or cur-

tains to prevent direct sunlight from entering the room.

Note



Do

z

When the air conditioner is turned off, the ap automatically

z

Always keep the air lter clean.

moves toward the direction of closing.

(A clogged lter will impair the performance of the unit.)

z

The ap (vertical airow ap) moves to the upward position

→ “Maintenance” (P.8)

during standby operation for heating.

z

To prevent conditioned air from escaping, keep win-

z

The swing operation starts after the standby operation has

dows, doors and any other openings closed.

nished, but “Swing” is indicated on the remote controller

even during the standby operation.

7

When operating multiple indoor units using 1 remote controller, airow direction can be adjusted for indoor each unit individually or

all units at the same time.

Unit No.

e.g.) 1 outdoor unit

e.g.) 2 outdoor units

and

and

8 indoor units

4 indoor units

No display

No display

1-1

1-1

1-2

1-2

1-3

1-3

1-4

1-4

“FLAP” button

“UNIT” button

2-1

1-8

z

Maximum of

8 indoor units

2-4

can be connected.

OI_F569617_EU_L.indb 7 2013-12-17 17:57:43