Panasonic DMR-E65 EE-S: 1 Press [DVD] to select the DVD drive.

1 Press [DVD] to select the DVD drive.: Panasonic DMR-E65 EE-S

Recording television programmes

Refer to the control reference on page 16.

Direct TV Recording

[RAM] [DVD-R]

When connected to a television that has the Q Link

function using a fully wired 21-pin Scart cable.

Flexible Recording

This function allows you to immediately start recording the

programme that you are viewing on the TV.

The unit sets the best possible picture quality that fits the recording

within the remaining disc space. The recording mode becomes FR

mode.

1 Press [DVD] to select the DVD drive.

e.g.,

The DVD indicator lights up on the unit.

Recorded

Remain

2 Insert a disc. ( page 16)

45 minutes in

Perfectly fit!

3 Press [¥ DIRECT TV REC].

SP mode

Recording starts.

Recording rate

between SP and LP

To stop recording

Press [].

60 minutes

Programme to be recorded

Preparation

Recording from satellite/digital receiver

Recording

Select the channel to record.

or decoder

Preparation

1 While stopped

Connect a satellite/digital receiver or decoder to this unit’s input

terminals ( page 9).

Press [FUNCTIONS].

When recording bilingual programmes

2 Press [3, 4, 2, 1] to select

[RAM]

When both M 1 and M 2 is selected on the connected equipment,

“FLEXIBLE REC” and press [ENTER].

you can select the audio type in playback.

FLEXIBLE REC

[DVD-R]

Recording in FR mode

Select either M 1 or M 2 on the connected equipment. (You cannot

Maximum rec. time

3 Hour 00 Min.

select the audio type in playback.)

Set rec. time

3 Hour 00 Min.

Start Cancel

When the output signal from the external equipment is NTSC,

SELECT

change the “TV System” to “NTSC” in the SETUP menu

RETURN

( page 46).

Press [DVD] to select the DVD drive.

3 Press [2, 1] to select “Hour” and

“Min.” and press [3, 4] to set the

1 While stopped

recording time.

Press [INPUT SELECT] to select the

You can also set the recording time with the numbered

input channel for the equipment you

buttons.

have connected.

4 When you want to start recording

e.g., If you have connected to AV2 input terminals, select “AV2”.

Press [3, 4, 2, 1] to select “Start”

2 Press [REC MODE] to select the

and press [ENTER].

recording mode.

Recording starts.

3 Select the channel on the other

To exit the screen without recording

equipment.

Press [RETURN].

4 Press [¥ REC].

To stop recording partway

Press [].

Recording starts.

To show the remaining time

To skip unwanted parts

DVD-RAM

Press [STATUS].

Press [;] to pause recording. (Press again to restart recording.)

Remaining

REC 59

time

ARD

To stop recording

Press [].

L R

RQT7448

18

18

Оглавление