Panasonic HPS14042E: Supplied Accessories Attaching/Detaching the Lens

Supplied Accessories

Attaching/Detaching the Lens

[Inspection to be performed when you unpack

≥ Refer also to the camera’s operating instructions

the unit]

for attaching and detaching the lens.

When removing the unit from its packing box, check

∫ Attaching the Lens

that the main unit and the supplied accessories are

≥ Check that the camera is turned off.

there and also check their external appearance and

1 Turn the lens rear cap

functions to verify that they have not sustained any

damage during distribution and transportation.

to detach it.

If you discover any trouble, contact your vendor

A: Lens Rear Cap

before using the product.

Product numbers correct as of September 2011.

These may be subject to change.

2

Align the lens fitting

123

marks

B

(red marks)

on

the camera body and the

lens and then rotate the

lens in the direction of

the arrow until it clicks.

• Do not press the lens

VFC4460 VYF3443

VFC4605

release button C when you

1 Lens Storage Bag

attach a lens.

2 Lens Cap

• Do not try to attach the lens when holding it at an

3 Lens Rear Cap

angle to the camera body as the lens mount may

(The lens rear cap and lens cap are attached to

get scratched.

the interchangeable lens at the time of purchase.)

• Check that the lens is attached correctly.

5

VQT3S52

VQT3S52_E.book 5 ページ ２０１１年８月３０日　火曜日　午後５時５５分



VQT3S52_E.book 6 ページ ２０１１年８月３０日　火曜日　午後５時５５分

∫ Detaching the Lens

∫ Attaching Filters

≥ To protect the lens, turn off the power of the digital

≥ Attach or detach the filter when the lens barrel is

camera and confirm that the lens barrel is

recessed.

recessed.

≥ Vignetting may occur if using 2 or more

MC protectors (optional: DMW-LMCH37),

While pressing on the

PL filters (optional: DMW-LPL37) or ND filters

lens release button D,

(optional: DMW-LND37), or if using thick

rotate the lens toward

protectors and/or filters.

the arrow until it stops

≥ The filter may become impossible to remove if

and then remove.

excessively tightened, so please refrain from

• Attach the lens rear cap so



tightening it too strongly.

that the lens contact point

≥ It is possible to attach the lens cap with the filter

does not get scratched.

already attached.

• Attach the body cap to the camera so no dirt or

≥ You cannot attach a conversion lens or adaptor to

dust will get inside the main unit.

this lens.

(As of September 2011) A filter may be

used, but attaching any other element may cause

∫ Attaching and

damage to the lens.

Detaching the Lens Cap

Pinch the lens cap as

shown in the figure to

attach or detach.

• Be careful not to lose the

lens cap.

6

VQT3S52