Panasonic H-VS014140: Supplied Accessories Attaching/Detaching the Lens

Supplied Accessories

Attaching/Detaching the Lens

[Inspection to be performed when you unpack

≥ Refer also to the camera’s operating instructions

the unit]

for attaching and detaching the lens.

When removing the unit from its packing box, check

∫ Attaching the Lens

that the main unit and the supplied accessories are

≥ Check that the camera is turned off.

there and also check their external appearance and

1 Turn the lens rear cap

functions to verify that they have not sustained any

to detach it.

damage during distribution and transportation.

A: Lens Rear Cap

If you discover any trouble, contact your vendor



before using the product.

312 4

2 Align the lens fitting

marks B (red marks) on

the camera body and the

lens and then rotate the

VFC4430 VYC0997 VYF3250 VFC4315

lens in the direction of

1 Lens Storage Bag

the arrow until it clicks.

2 Lens Hood

• Do not press the lens release button when you

3 Lens Cap

attach a lens.

• Do not try to attach the lens when holding it at an

4 Lens Rear Cap

angle to the camera body as the lens mount may

(The lens cap and lens rear cap are attached to

get scratched.

the interchangeable lens at the time of

• Check that the lens is attached correctly.

purchase.)

5

VQT2C39





H-VS014140E-VQT2C39.book 5 ページ ２００９年３月１２日　木曜日　午後４時３分

H-VS014140E-VQT2C39.book 6 ページ ２００９年３月１３日　金曜日　午前１０時１３分

∫ Detaching the Lens

∫ Attaching the Lens Hood

≥ Check that the camera is turned off.

(Supplied Accessory)

Press the lens release button C while

Insert the lens hood into the lens with the

short sides at the top and bottom, and

turning the lens as far as possible in the

turn in the direction of the arrow until it

direction of the arrow to detach it.

stops.

• Attach the lens rear cap so

that the lens contact point

does not get scratched.

• Attach the body cap to the

camera so no dirt or dust will



get inside the main unit.

D: Fit to the mark

∫ Attaching and Detaching the Lens Cap

≥ Be careful not to lose

∫ Temporarily Storing the Lens Hood

the lens cap.

1 Turn the lens hood in the direction of the

arrow to detach it.

6

VQT2C39

H-VS014140E-VQT2C39.book 7 ページ ２００９年３月１２日　木曜日　午後４時３分

2 Reverse the lens hood and then attach it

in the same way as shown previously.

≥ When taking pictures with the

flash with the lens hood

attached, the lower portion of

the screen may turn dark

(vignetting effect) and the

control of the flash may be

disabled because the photo

flash may be obscured by the lens hood. We

recommend detaching the lens hood.

≥ When using the AF assist lamp in the dark, detach

the lens hood.

∫ Attaching Filters

≥ Vignetting may occur if using 2 or more

MC protectors (optional), PL filters (optional) or

ND filters (optional), or if using thick protectors

and/or filters.

7

VQT2C39