Panasonic HFS100300E: Supplied Accessories Attaching/Detaching the Lens

VQT2Z59_E.book 5 ページ ２０１０年８月２５日　水曜日　午後８時２１分

Supplied Accessories

Attaching/Detaching the Lens

[Inspection to be performed when you unpack

≥ Refer also to the camera’s operating instructions

the unit]

for attaching and detaching the lens.

When removing the unit from its packing box, check

∫ Attaching the Lens

that the main unit and the supplied accessories are

≥ Check that the camera is turned off.

there and also check their external appearance and

1 Turn the lens rear

functions to verify that they have not sustained any

cap to detach it.

damage during distribution and transportation.

A: Lens Rear Cap

If you discover any trouble, contact your vendor

before using the product.

Product numbers correct as of October 2010.

These may be subject to change.

312 4

2 Align the lens fitting

marks B (red marks) on

the camera body and the

lens and then rotate the

lens in the direction of

VFC4601 VYC1016 VYF3375 VFC4605

the arrow until it clicks.

• Do not press the lens release

1 Lens Storage Bag

button C when you attach a lens.

2 Lens Hood

• Do not try to attach the lens when holding it at an

3 Lens Cap

angle to the camera body as the lens mount may

4 Lens Rear Cap

get scratched.

(The lens rear cap and lens cap are attached to

• Check that the lens is attached correctly.

the interchangeable lens at the time of purchase.)

5

VQT2Z59

VQT2Z59_E.book 6 ページ ２０１０年８月２０日　金曜日　午後９時１７分

∫ Detaching the Lens

∫ Attaching the Lens Hood

≥ Check that the camera is turned off.

(Supplied Accessory)

Press the lens release

Insert the lens hood into the lens, and

button D while turning

turn in the direction of the arrow until it

the lens as far as

stops.

possible in the direction

of the arrow to detach it.

• Attach the lens rear cap so

that the lens contact point does not get

scratched.

• Attach the body cap to the camera so no dirt or

E: Fit to the mark

dust will get inside the main unit.

∫ Temporarily Storing the Lens Hood

∫ Attaching and Detaching the Lens Cap

≥ Be careful not to lose

1 Turn the lens hood in the direction of the

the lens cap.

arrow to detach it.

6

VQT2Z59

VQT2Z59_E.book 7 ページ ２０１０年８月２０日　金曜日　午後９時１７分

≥ You cannot attach a conversion lens or adaptor to

2 Reverse the lens hood and then attach it

this lens. A filter may be used, but attaching any

in the same way as shown previously.

other element may cause damage to the lens.

≥ When taking pictures with

the flash with the lens hood

attached, the lower portion of

the screen may turn dark

(vignetting effect) and the

control of the flash may be

disabled because the photo

flash may be obscured by the lens hood. We

recommend detaching the lens hood.

≥ When using the AF assist lamp in the dark, detach

the lens hood.

∫ Attaching Filters

≥ Vignetting may occur if using 2 or more

MC protectors (optional: DMW-LMCH67) or

PL filters (optional: DMW-LPL67), or if using thick

protectors and/or filters.

≥ The filter may become impossible to remove if

excessively tightened, so please refrain from

tightening it too strongly.

≥ It is possible to attach the lens cap with the filter

already attached.

7

VQT2Z59