Panasonic CS-A28JKD: PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS

PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS

Auto OFF/ON button

e-ion AIR PURIFYING SYSTEM

• Used when remote control is misplaced

or malfunction.

Do not touch during operation

Action Mode

e-ion fi lters e-ion charging wire

Active e-ion Generator

Press once. Auto

Press and hold until 1 beep

Cooling

is heard, then release.

Press the button to turn off.

Front panel

INDICATOR

(Red/Orange/Blue)

(Green)

Receiver

(Orange)

(Orange)

(Orange)

(Blue)

Airfl ow direction louver

• Do not adjust by hand.

TO TURN ON OR OFF THE UNIT

• Please be aware of the OFF indication on the remote control

display to prevent the unit from starting/stopping improperly.

TO SET TEMPERATURE

Maximum distances: 8m

• For heat, cool and dry modes, the range of temperature for

selection is 16°C ~ 30°C.

• Operating the unit within the recommended temperature could

induce energy saving.

Remote control

HEAT mode : 20˚C ~ 24˚C.

display

COOL mode : 26˚C ~ 28˚C.

DRY mode : 1˚C ~ 2˚C lower than room temperature.

TO SELECT OPERATION MODE

AUTO mode - For your convenience

• Unit selects the operation mode according to the room

temperature.

• Once auto mode is selected, the unit will operate at the standard

setting temperature.

• To change the standard setting temperature, press

for “HI” or

for “LO”.

Room

Operation

Standard setting

HI

LO

temperature

mode

temperature

(+2°C)

(-2°C)

23°C & above Cool 25°C 27°C 23°C

Below 23°C Dry 22°C 24°C 20°C

Below 20°C Heat 21°C 23°C 19°C

HEAT mode - To enjoy warm air

• In heat mode, it takes a while for the unit to warm up. The power

indicator blinks during this operation.

COOL mode - To enjoy cool air

DRY mode - To dehumidify the environment

• Unit operates at low fan speed to give a gentle cooling operation.

4

ENGLISH

5

TO SET THE TIMER

• To turn ON or OFF the unit at a preset time.

Select ON or

Set the time. Confi rm.

OFF timer.

• To cancel ON or OFF timer, press

or then

press .

• When ON Timer is set, the unit may start earlier (up

to 30 minutes) before the actual set time in order to

achieve the desired temperature on time.

• Timer operation is based on the clock set in the remote

control and repeats daily once set. For clock setting,

please refer to Remote Control Preparation at back

cover.

• If timer is cancelled manually or due to power failure,

you can restore the previous setting (once power is

resumed) by pressing .

•

, , and can be activated

in all modes and can be cancelled by pressing the

respective button again.

•

and or and can not be

selected at the same time.

•

and can be activated even when the

unit is turned off. In this condition, fan speed and air

swing can not be adjusted.

TO SELECT FAN SPEED

(3 OPTIONS)

• For AUTO, the indoor fan speed is automatically

adjusted according to the operation mode.

TO ADJUST AIRFLOW

DIRECTION (5 OPTIONS)

• Keeps the room ventilated.

• If AUTO is set, the louvers swing left/right and

up/down automatically.

• In heat mode, the air blows horizontally for a while,

then starts to blow downwards and the airfl ow louver

start to swing left/right after the temperature rises.

TO ENJOY CLEAN & FRESH

AIR

• Generates negative ions to produce fresh air effect

and attract dust which will then be captured at the

positively charged e-ion fi lters.

TO MONITOR AIR

QUALITY

• Patrol sensor detects air quality.

Indicator Air Quality

• When air quality is at dirty

Blue Clean

level, e-ion operation will start

Orange Moderate

automatically.

Red Dirty

OPTIONAL SETTINGS

TO ENJOY QUIET

Patrol starts automatically with the unit

ENVIRONMENT

switched on with .

• This operation reduces airfl ow noise.

Press and hold for 5 seconds, then release

to disable or restore this setting.

TO ACHIEVE

TEMPERATURE QUICKLY

Press and hold for 5 seconds to dim or

• This operation will stop automatically after 15 minutes.

restore the unit’s indicator brightness.

Press and hold for approximately 10

seconds to show temperature setting in

°C or °F.

Press and hold for approximately 5 seconds

to show 12-hour (am/pm) or 24-hour time

indication.

Press to restore the remote control’s default

setting.

Not used in normal operations.

Use curtains to screen off sunlight and outdoor heat to

reduce power consumption during cool mode.