Panasonic CS-A28JKD: CARE & CLEANING CARE & CLEANING

6

Remove

ALUMINIUM FIN

• Clean the fi lters regularly.

• Wash/rinse the fi lters gently with water

to avoid damage to the fi lter surface.

• Dry the fi lters thoroughly under

the shade, away from fi re or direct

sunlight.

• Replace any damage fi lter.

e-ion FILTERS

Clean with dry cotton bud.

• Active e-ion

generator cleaning is

recommended every 6

months.

ACTIVE e-ion GENERATOR

FRONT PANEL

Remove Front Panel

• Raise and pull to remove the front

panel.

• Wash gently and dry.

Close Front Panel

• Press down both ends of the front

panel to close it securely.

Wipe the unit gently with a soft,

dry cloth.

INDOOR UNIT

e-ion

CARE & CLEANING CARE & CLEANING

CHARGING WIRE

WASHING INSTRUCTIONS

• Do not use benzene, thinner or scouring powder.

• Use only soap (

pH7) or neutral household detergent.

• Do not use water hotter than 40°C.

HINT

• To ensure optimal performance of the unit, cleaning

maintenance have to be carried out at regular intervals.

Please consult authorized dealer.

FOR SEASONAL INSPECTION AFTER EXTENDED

NON-USE

• Checking of remote control batteries.

• No obstruction at air inlet and air outlet vents.

• After 15 minutes of operation, it is normal to have the

following temperature difference between air inlet and air

outlet vents:

Cooling: ≥ 8°C Heating: ≥ 14°C

NON SERVICEABLE CRITERIAS

TURN OFF POWER SUPPLY then please consult

authorized dealer under the following conditions:

• Abnormal noise during operation.

• Water/foreign particles have entered the remote control.

• Water leaks from Indoor unit.

• Circuit breaker switches off frequently.

• Power cord becomes unnaturally warm.

• Switches or buttons are not functioning properly.

• Timer indicator blinks.

• Switch off the power supply before cleaning.

• Do not touch the aluminium fi n, sharp parts may cause injury.

CAUTION

FOR EXTENDED NON-USE

• Activate heat mode for 2~3 hours to remove moisture left in

the internal parts thoroughly.

• Turn off the power supply.

• Remove the remote control batteries.