Panasonic S45MK1E5A: Adjusting Air fl ow Direction

6

Adjusting Air fl  ow Direction

 Using the wireless remote controller

 Using the timer remote controller

Press 

 / 

  to select your desired air

fl

 ow direction.

 Flap swing motion

Display when swing operation 

is stopped

Pressing the button during 

swing operation can stop the 

fl

 ap at the desired position.

 Flap 

fi

 xed 

(5 levels)

Recommended vertical air

fl

 ow direction

Set the 

fl

 ap to the downward position for heating operation.

(With the upward setting, warm air cannot reach the 

fl

 oor.)

Set the 

fl

 ap to the upward position for cooling operation.

(With the downward setting, condensation may drip on to the 

fl

 oor.)

HEAT

COOL / DRY

FAN

Air

fl

 ow direction 

display

Air

fl

 ow direction display

“FLAP” button

“FLAP” button

Fan and 

heating

Cooling and 

drying

(5 levels)

(3 levels)

Recommended

Recommended

Fixed to this 

position

 Adjusting the horizontal air

fl

 ow direction

 (Manual)

Move the horizontal air

fl

 ow vanes by hand for adjustment.

This section is described in the instruction manual supplied with the timer remote contoller (CZ-RTC2).

Regarding the high-spec wired remote controller (CZ-RTC3), refer to the Operating Instructions supplied with the model CZ-RTC3.

Adjusting the upward and downward motion of air

fl

 ow direction 

OI̲00̲284010̲EU̲all.indb   6

OI̲00̲284010̲EU̲all.indb   6

2013/11/29   14:35:33

2013/11/29   14:35:33

7

E

NGLISH

Tips for Energy Saving

Attention:

Never use your hands to move the 

fl

 ap (vertical air

fl

 ow 

fl

 ap) 

controlled using the remote controller.

Note

When the air conditioner is turned off, the 

fl

 ap automatically 

moves toward the direction of closing.

The 

fl

 ap (vertical air

fl

 ow 

fl

 ap) moves to the upward position 

during standby operation for heating.

The swing operation starts after the standby operation has 

fi

 nished, but “Swing” is indicated on the remote controller 

even during the standby operation.

 Avoid

Do not block the air intake and outlet of the unit.

(If either is obstructed, the unit will not function 

well, causing malfunction.)

During cooling operation, use sunshades, blinds or cur-

tains to prevent direct sunlight from entering the room.

 Do

Always keep the air 

fi

 lter clean.

(A clogged 

fi

 lter will impair the performance of the unit.)

→

 “Maintenance” (P.8)

To prevent conditioned air from escaping, keep win-

dows, doors and any other openings closed.

Adjusting air

fl

 ow direction

 for multiple indoor units (Timer remote controller only)

 When setting the air

fl

 ow direction of 

each indoor unit individually

1

Press 

 to select the Unit No. 

                                     for adjustment.

2

Press 

 to select your desired     

                                     air

fl

 ow direction.

 When setting the air

fl

 ow direction of

 all indoor units at the same time

1

Press 

 to select 

No display

 .

2

Press 

 to select your desired 

                                     air

fl

 ow direction.

1-1

1-2

1-3

1-4

1-8

“UNIT” button

“FLAP” button

Maximum of 

8 indoor units 

can be connected.

Unit No.

When operating multiple indoor units using 1 remote controller, air

fl

 ow direction can be adjusted for indoor each unit individually or 

all units at the same time.

e.g.) 1 outdoor unit 

and 

8 indoor units

No display

1-1

1-2

1-3

1-4

2-1

2-4

e.g.) 2 outdoor units 

and 

4 indoor units

No display

1-1

1-2

1-3

1-4

1-8

OI̲00̲284010̲EU̲all.indb   7

OI̲00̲284010̲EU̲all.indb   7

2013/11/29   14:35:34

2013/11/29   14:35:34