Panasonic CS-A9JKD: PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS

PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS: Panasonic CS-A9JKD

PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS

Auto OFF/ON button

e-ion AIR PURIFYING SYSTEM

Used when remote control is misplaced

or malfunction.

Do not touch during operation

Action Mode

Press once. Auto

e-ion lters e-ion charging wire Active e-ion Generator

Press and hold until 1 beep is

Cooling

heard, then release.

Press the button to turn off.

Front panel

INDICATOR

(Red/Orange/Blue)

(Green)

(Orange)

Receiver

(Orange)

(Orange)

(Blue)

Horizontal air ow

direction louver

• Manually

POWE

TO TURN ON OR OFF THE UNIT

adjustable.

Vertical air ow

direction louver

Do not adjust

Maximum

by hand.

distances: 8m

Remote control

display

4

R

Please be aware of the OFF indication on the remote control

display to prevent the unit from starting/stopping improperly.

TO SET TEMPERATURE

For heat, cool and dry modes, the range of temperature for

selection is 16°C ~ 30°C.

Operating the unit within the recommended temperature could

induce energy saving.

HEAT mode : 20˚C ~ 24˚C.

COOL mode : 26˚C ~ 28˚C.

DRY mode : 1˚C ~ 2˚C lower than room temperature.

TO SELECT OPERATION MODE

AUTO mode - For your convenience

Unit selects the operation mode according to the room

temperature.

Once auto mode is selected, the unit will operate at the standard

setting temperature.

To change the standard setting temperature, press

for “HI”

or for “LO”.

Room

Operation

Standard setting

HI

LO

temperature

mode

temperature

(+2°C)

(-2°C)

23°C & above Cool 25°C 27°C 23°C

Below 23°C Dry 22°C 24°C 20°C

Below 20°C Heat 21°C 23°C 19°C

HEAT mode - To enjoy warm air

In heat mode, it takes a while for the unit to warm up. The power

indicator blinks during this operation.

COOL mode - To enjoy cool air

DRY mode - To dehumidify the environment

Unit operates at low fan speed to give a gentle cooling operation.

ENGLISH

5

TO SET THE TIMER

TO SET THE TIMER

To turn ON or OFF the unit at a preset time.

TIMER

Select ON or

Set the time. Con rm.

OFF timer.

To cancel ON or OFF timer, press or then

press .

When ON Timer is set, the unit may start earlier (up

to 30 minutes) before the actual set time in order to

achieve the desired temperature on time.

Timer operation is based on the clock set in the remote

control and repeats daily once set. For clock setting,

please refer to Remote Control Preparation at back

cover.

If timer is cancelled manually or due to power failure,

you can restore the previous setting (once power is

resumed) by pressing .

OPTIONAL SETTINGS

TO SELECT FAN SPEED

(3 OPTIONS)

For AUTO, the indoor fan speed is automatically

adjusted according to the operation mode.

TO ADJUST VERTICAL AIRFLOW

DIRECTION (5 OPTIONS)

Keeps the room ventilated.

If AUTO is set, the louvers swing up/down

automatically.

In heat mode, the air blows horizontally for a while,

then starts to blow downwards and the air ow louver

start to swing left/right after the temperature rises.

TO ENJOY CLEAN & FRESH

AIR

Generates negative ions to produce fresh air effect

and attract dust which will then be captured at the

positively charged e-ion lters.

PATROL SENSOR

TO MONITOR AIR

QUALITY

Indicator Air Quality

Patrol sensor detects air

Blue Clean

quality.

Orange Moderate

OPTIONAL SETTINGS

When air quality is at dirty

Red Dirty

level, e-ion operation will

Patrol starts automatically with the unit

start automatically.

switched on with .

POWERFUL NORMALQUIET

Press and hold for 5 seconds, then release

to disable or restore this setting.

TO ENJOY QUIET ENVIRONMENT

QUIET

Press and hold for 5 seconds to dim or

This operation reduces air ow noise.

restore the unit’s indicator brightness.

TO ACHIEVE TEMPERATURE

Press and hold for approximately 10

QUICKLY

POWERFUL

seconds to show temperature setting in

This operation will stop automatically

°C or °F.

after 15 minutes.

Press and hold for approximately 5 seconds

to show 12-hour (am/pm) or 24-hour time

indication.

Press to restore the remote control’s default

, and can be activated in

setting.

all modes and can be cancelled by pressing the

respective button again.

Not used in normal operations.

and can not be selected at the same

Use curtains to screen off sunlight and outdoor heat to

time.

reduce power consumption during cool mode.

and can be activated even when the unit

is turned off. In this condition, fan speed and air swing

can not be adjusted.

Оглавление