Panasonic S-A24JKD: PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS

PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS: Panasonic S-A24JKD

PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS

Auto OFF/ON button

Used when remote control is misplaced

or malfunction.

Air Filters

Action Mode

Press once. Auto

Press and hold until 1 beep is

Cooling

heard, then release.

Press the button to turn off.

Front panel

INDICATOR

(Green)

(Orange)

Horizontal air ow

direction louver

• Manually

adjustable.

Receiver

Vertical air ow

direction louver

Do not adjust

by hand.

Maximum distances: 8m

Remote control

display

POWE

TO TURN ON OR OFF THE UNIT

4

R

Please be aware of the OFF indication on the remote

control display to prevent the unit from starting/stopping

improperly.

TO SET TEMPERATURE

For heat, cool and dry modes, the range of temperature

for selection is 16°C ~ 30°C.

Operating the unit within the recommended temperature

could induce energy saving.

HEAT mode : 20˚C ~ 24˚C.

COOL mode : 26˚C ~ 28˚C.

DRY mode : 1˚C ~ 2˚C lower than room temperature.

ENGLISH

5

TO SET THE TIMER

TO SET THE TIMER

To turn ON or OFF the unit at a preset time.

TIMER

Select ON or

Set the time. Con rm.

OFF timer.

To cancel ON or OFF timer, press or then

press .

When ON Timer is set, the unit may start earlier (up

to 30 minutes) before the actual set time in order to

achieve the desired temperature on time.

Timer operation is based on the clock set in the remote

control and repeats daily once set. For clock setting,

please refer to Remote Control Preparation at back

cover.

If timer is cancelled manually or due to power failure,

you can restore the previous setting (once power is

resumed) by pressing .

OPTIONAL SETTINGS

TO SELECT OPERATION MODE

AUTO mode - For your convenience

Unit selects the operation mode according to the

room temperature.

Once auto mode is selected, the unit will operate at

the standard setting temperature.

Room

Operation

Standard setting

temperature

mode

temperature

23°C & above Cool 25°C

Below 23°C Dry 22°C

Below 20°C Heat 21°C

To change the standard setting temperature, press

for “HI” or for “LO”.

Operation mode HI (+2°C) LO (-2°C)

Cool 27°C 23°C

Dry 24°C 20°C

Heat 23°C 19°C

HEAT mode - To enjoy warm air

In heat mode, it takes a while for the unit to warm up.

The power indicator blinks during this operation.

COOL mode - To enjoy cool air

DRY mode - To dehumidify the environment

Unit operates at low fan speed to give a gentle

OPTIONAL SETTINGS

cooling operation.

TO SELECT FAN SPEED

Press and hold for 5 seconds to dim or

(3 OPTIONS)

restore the unit’s indicator brightness.

Press and hold for approximately 10

seconds to show temperature setting in

For AUTO, the indoor fan speed is automatically

°C or °F.

adjusted according to the operation mode.

TO ADJUST VERTICAL AIRFLOW

Press and hold for approximately 5 seconds

DIRECTION (5 OPTIONS)

to show 12-hour (am/pm) or 24-hour time

indication.

Press to restore the remote control’s default

Keeps the room ventilated.

setting.

If AUTO is set, the louvers swing up/down

automatically.

In heat mode, the air blows horizontally for a while,

Not used in normal operations.

then starts to blow downwards and the air ow louver

start to swing left/right after the temperature rises.

Use curtains to screen off sunlight and outdoor heat to

reduce power consumption during cool mode.

Оглавление