Panasonic KX-FT904RU: 11.4 Recording paper

FT-902-904-908RU-ru.book Page 65 Friday, July 2, 2004 9:15 PM

11. English Quick Start

E

Close the cover securely by pushing down on both

11.4 Recording paper

sides.

A

Open the cover by pressing the cover open button

(

1

).

1

F

For KX-FT902:

Press

{

FAX/START

}

, then tear off the excess paper

B

Install the recording paper.

by pulling it towards you.

Correct

Incorrect

For KX-FT904/KX-FT908:

C

Insert the leading edge of the paper into the opening

Press

{

FAX/START

}

to cut the paper.

above the thermal head (

1

).

1

D

Pull the paper out of the unit.

{FAX/START}

Note:

L

If the paper is secured with glue or tape, cut

approximately 15 cm from the beginning of the roll

before installing it.

L

When the power cord is connected, a message is

printed each time the cover is opened then

closed. If the recording paper is installed upside

down, the message will not be printed. Install the

paper correctly.

L

For accessory information, see page 63.

L

Make sure that there is no slack in the paper roll.

65