Panasonic KX-FT502: 10.3 Recording paper

10.3 Recording paper: Panasonic KX-FT502

FT502-506RU-PNQX3202ZA-OI-ru.book Page 43 Monday, October 11, 2010 1:12 PM

10. English Quick Start

L

Make sure that there is no slack in the paper roll.

10.3 Recording paper

E

Close the top cover securely by pushing down on both sides.

A

Open the top cover by pressing the top cover release button

(

1

).

1

F

For KX-FT502:

B

Install the recording paper.

Press

{

Fax/Start

}

, then tear off the excess paper by pulling it

Correct

towards you.

Incorrect

{Fax/Start}

C

Insert the leading edge of the paper into the opening above

the thermal head (

1

).

For KX-FT504:

Press

{

Fax/Start

}

to cut the paper.

1

{Fax/Start}

Note:

L

If the paper is secured with glue or tape, cut approximately

15 cm from the beginning of the roll before installing it.

L

When the power cord is connected, a message is printed

each time the top cover is opened then closed. If the

D

Pull the paper out of the unit.

recording paper is installed upside down, the message will

not be printed. Install the paper correctly.

43

Оглавление