Panasonic CS-PA24JKD: PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS

PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS

Auto OFF/ON button

• Used when remote control is misplaced

or malfunction.

Air Filters

Action Mode

Press once. Auto

Press and hold until 1 beep is

Cooling

heard, then release.

Press the button to turn off.

Front panel

INDICATOR

(Green)

(Orange)

Horizontal airfl ow

direction louver

• Manually

adjustable.

Receiver

Vertical airfl ow

direction louver

• Do not adjust

by hand.

Maximum distances: 8m

Remote control

display

POWE

TO TURN ON OR OFF THE UNIT

4

• Please be aware of the OFF indication on the remote

control display to prevent the unit from starting/stopping

improperly.

TO SET TEMPERATURE

• For heat, cool and dry modes, the range of temperature

for selection is 16°C ~ 30°C.

• Operating the unit within the recommended temperature

could induce energy saving.

HEAT mode : 20˚C ~ 24˚C.

COOL mode : 26˚C ~ 28˚C.

DRY mode : 1˚C ~ 2˚C lower than room temperature.

ENGLISH

5

TO SET THE TIMER

• To turn ON or OFF the unit at a preset time.

TIMER

Select ON or

Set the time. Confi rm.

OFF timer.

• To cancel ON or OFF timer, press or then

press .

• When ON Timer is set, the unit may start earlier (up

to 30 minutes) before the actual set time in order to

achieve the desired temperature on time.

• Timer operation is based on the clock set in the remote

control and repeats daily once set. For clock setting,

please refer to Remote Control Preparation at back

cover.

• If timer is cancelled manually or due to power failure,

you can restore the previous setting (once power is

resumed) by pressing .

TO SELECT OPERATION MODE

AUTO mode - For your convenience

• Unit selects the operation mode according to the

room temperature.

• Once auto mode is selected, the unit will operate at

the standard setting temperature.

Room

Operation

Standard setting

temperature

mode

temperature

23°C & above Cool 25°C

Below 23°C Dry 22°C

Below 20°C Heat 21°C

• To change the standard setting temperature, press

for “HI” or for “LO”.

Operation mode HI (+2°C) LO (-2°C)

Cool 27°C 23°C

Dry 24°C 20°C

Heat 23°C 19°C

HEAT mode - To enjoy warm air

• In heat mode, it takes a while for the unit to warm up.

The power indicator blinks during this operation.

COOL mode - To enjoy cool air

DRY mode - To dehumidify the environment

• Unit operates at low fan speed to give a gentle

OPTIONAL SETTINGS

cooling operation.

TO SELECT FAN SPEED

Press and hold for 5 seconds to dim or

(3 OPTIONS)

restore the unit’s indicator brightness.

Press and hold for approximately 10

seconds to show temperature setting in

• For AUTO, the indoor fan speed is automatically

°C or °F.

adjusted according to the operation mode.

TO ADJUST VERTICAL AIRFLOW

Press and hold for approximately 5 seconds

DIRECTION (5 OPTIONS)

to show 12-hour (am/pm) or 24-hour time

indication.

Press to restore the remote control’s default

• Keeps the room ventilated.

setting.

• If AUTO is set, the louvers swing up/down

automatically.

• In heat mode, the air blows horizontally for a while,

Not used in normal operations.

then starts to blow downwards and the airfl ow louver

start to swing left/right after the temperature rises.

Use curtains to screen off sunlight and outdoor heat to

reduce power consumption during cool mode.