Panasonic CS-C24JKD: PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS

PRODUCT OVERVIEW & OPERATIONS

PRODUCT OVERVIEW & OPERATIONS

Auto OFF/ON button

e-ion AIR PURIFYING SYSTEM

• Used when remote control is misplaced

or malfunction.

Do not touch during operation

Action Mode

e-ion fi lters e-ion charging wire

Active e-ion Generator

Press once. Auto

Press and hold until 1 beep

Cooling

is heard, then release.

Press the button to turn off.

Front panel

INDICATOR

(Red/Orange/Blue)

Receiver

(Green)

(Orange)

(Orange)

(Orange)

(Blue)

Airfl ow direction louver

• Do not adjust by hand.

TO TURN ON OR OFF THE UNIT

• Please be aware of the OFF indication on the remote control

Maximum distances: 8m

display to prevent the unit from starting/stopping improperly.

TO SET TEMPERATURE

Remote control

• For cool and dry modes, the range of temperature for selection is

display

16°C ~ 30°C.

• Operating the unit within the recommended temperature could

induce energy saving.

COOL mode : 26˚C ~ 28˚C.

DRY mode : 1˚C ~ 2˚C lower than room temperature.

TO SELECT OPERATION MODE

AUTO mode - For your convenience

• Unit selects the operation mode according to the room

temperature.

• Once auto mode is selected, the unit will operate at the standard

setting temperature.

• To change the standard setting temperature, press

for “HI” or

for “LO”.

Room

Operation

Standard setting

HI

LO

temperature

mode

temperature

(+2°C)

(-2°C)

23°C & above Cool 25°C 27°C 23°C

Below 23°C Dry 22°C 24°C 20°C

COOL mode - To enjoy cool air

DRY mode - To dehumidify the environment

• Unit operates at low fan speed to give a gentle cooling operation.

4

ENGLISH

5

TO

SET THE TIMER

TO SELECT FAN SPEED

(3 OPTIONS)

• To turn ON or OFF the unit at a preset time.

• For AUTO, the indoor fan speed is automatically

adjusted according to the operation mode.

TO ADJUST AIRFLOW

Select ON or

Set the time. Confi rm.

DIRECTION (5 OPTIONS)

OFF timer.

• To cancel ON or OFF timer, press

or then

press .

• When ON Timer is set, the unit may start earlier (up

• Keeps the room ventilated.

to 15 minutes) before the actual set time in order to

• If AUTO is set, the louvers swing left/right and

achieve the desired temperature on time.

up/down automatically.

• Timer operation is based on the clock set in the remote

TO ENJOY CLEAN &

control and repeats daily once set. For clock setting,

FRESH AIR

please refer to Remote Control Preparation at back

• Generates negative ions to produce fresh air effect

cover.

and attract dust which will then be captured at the

• If timer is cancelled manually or due to power failure,

positively charged e-ion fi lters.

you can restore the previous setting (once power is

TO MONITOR AIR

resumed) by pressing .

QUALITY

Indicator Air Quality

• Patrol sensor detects air quality.

Blue Clean

• When air quality is at dirty

Orange Moderate

level, e-ion operation will start

Red Dirty

automatically.

TO ENJOY QUIET

ENVIRONMENT

• This operation reduces airfl ow noise.

TO ACHIEVE

TEMPERATURE QUICKLY

• This operation will stop automatically after 15 minutes.

•

, , and can be activated

in all modes and can be cancelled by pressing the

respective button again.

• and or and can not be

selected at the same time.

• and can be activated even when the

unit is turned off. In this condition, fan speed and air

swing can not be adjusted.

OPTIONAL SETTINGS

Patrol starts automatically with the unit

switched on with

.

Press and hold for 5 seconds, then release

to disable or restore this setting.

Press and hold for 5 seconds to dim or

restore the unit’s indicator brightness.

Press and hold for approximately 10

seconds to show temperature setting in

°C or °F.

Press and hold for approximately 5 seconds

to show 12-hour (am/pm) or 24-hour time

indication.

Press to restore the remote control’s default

setting.

Not used in normal operations.

Use curtains to screen off sunlight and outdoor heat to

reduce power consumption during cool mode.