Panasonic CS-C12JKD: PRODUCT OVERVIEW & OPERATIONS

PRODUCT OVERVIEW & OPERATIONS: Panasonic CS-C12JKD

PRODUCT OVERVIEW & OPERATIONS

POWE

TO TURN ON OR OFF THE UNIT

4

R

PRODUCT OVERVIEW & OPERATIONS

Auto OFF/ON button

e-ion AIR PURIFYING SYSTEM

Used when remote control is misplaced

or malfunction.

Do not touch during operation

Action Mode

Press once. Auto

e-ion lters e-ion charging wire Active e-ion Generator

Press and hold until 1 beep is

Cooling

heard, then release.

Press the button to turn off.

Front panel

INDICATOR

(Red/Orange/Blue)

(Green)

(Orange)

Receiver

(Orange)

(Orange)

(Blue)

Horizontal air ow

direction louver

• Manually

adjustable.

Vertical air ow

direction louver

Do not adjust

Maximum

by hand.

Please be aware of the OFF indication on the remote control

distances: 8m

display to prevent the unit from starting/stopping improperly.

TO SET TEMPERATURE

For cool and dry modes, the range of temperature for selection is

Remote control

16°C ~ 30°C.

display

Operating the unit within the recommended temperature could

induce energy saving.

COOL mode : 26˚C ~ 28˚C.

DRY mode : 1˚C ~ 2˚C lower than room temperature.

TO SELECT OPERATION MODE

AUTO mode - For your convenience

Unit selects the operation mode according to the room

temperature.

Once auto mode is selected, the unit will operate at the standard

setting temperature.

To change the standard setting temperature, press

for “HI”

or for “LO”.

Room

Operation

Standard setting

HI

LO

temperature

mode

temperature

(+2°C)

(-2°C)

23°C & above Cool 25°C 27°C 23°C

Below 23°C Dry 22°C 24°C 20°C

COOL mode - To enjoy cool air

DRY mode - To dehumidify the environment

Unit operates at low fan speed to give a gentle cooling operation.

ENGLISH

, and can be activated in

all modes and can be cancelled by pressing the

respective button again.

and can not be selected at the same

time.

and can be activated even when the unit

is turned off. In this condition, fan speed and air swing

can not be adjusted.

5

TO SET THE TIMER

TO SET THE TIMER

To turn ON or OFF the unit at a preset time.

TIMER

Select ON or

Set the time. Con rm.

OFF timer.

To cancel ON or OFF timer, press or then

press .

When ON Timer is set, the unit may start earlier (up

to 15 minutes) before the actual set time in order to

achieve the desired temperature on time.

Timer operation is based on the clock set in the remote

control and repeats daily once set. For clock setting,

please refer to Remote Control Preparation at back

cover.

If timer is cancelled manually or due to power failure,

you can restore the previous setting (once power is

resumed) by pressing .

OPTIONAL SETTINGS

TO SELECT FAN SPEED

(3 OPTIONS)

For AUTO, the indoor fan speed is automatically

adjusted according to the operation mode.

TO ADJUST VERTICAL AIRFLOW

DIRECTION (5 OPTIONS)

Keeps the room ventilated.

If AUTO is set, the louvers swing up/down

automatically.

TO ENJOY CLEAN & FRESH

AIR

Generates negative ions to produce fresh air effect

and attract dust which will then be captured at the

positively charged e-ion lters.

TO MONITOR AIR

PATROL SENSOR

QUALITY

Indicator Air Quality

Patrol sensor detects air

Blue Clean

quality.

Orange Moderate

When air quality is at dirty

Red Dirty

level, e-ion operation will

start automatically.

OPTIONAL SETTINGS

POWERFUL NORMALQUITE

Patrol starts automatically with the unit

switched on with .

TO ENJOY QUIET ENVIRONMENT

QUIET

Press and hold for 5 seconds, then release

This operation reduces air ow noise.

to disable or restore this setting.

TO ACHIEVE TEMPERATURE

Press and hold for 5 seconds to dim or

QUICKLY

POWERFUL

restore the unit’s indicator brightness.

This operation will stop automatically

after 15 minutes.

Press and hold for approximately 10

seconds to show temperature setting in

°C or °F.

Press and hold for approximately 5 seconds

to show 12-hour (am/pm) or 24-hour time

indication.

Press to restore the remote control’s default

setting.

Not used in normal operations.

Use curtains to screen off sunlight and outdoor heat to

reduce power consumption during cool mode.

Оглавление