Sony STR-DE435: Using the Sleep Timer

Other Operations

Receiver Operations

Recording on a video tape

Using the Sleep Timer

You can record from a TV or a LD player using the

receiver. You can also add audio from a variety of

Using the controls on the remote, you can set the

audio sources when editing a video tape. See your

amplifier to turn off automatically at a time you

VCR’s instruction manual if you need help.

specify.

1 Press TV/LD to select the programme source.

2 Set the component to be ready for playing.

For example, turn on the TV and TV tuner.

3 Insert a blank video tape into the VCR for

recording.

SLEEP

4 Start recording on the VCR.

>/.

You can replace audio while editing a video tape

At the point you want to start adding different sound,

press another function button (for example, CD) and

Press SLEEP on the remote while the power is on.

start playback. The sound from the selected component

Each time you press SLEEP, the time changes as shown

will be recorded over the original audio.

below.

To resume recording the original sound, press the TV/

n 2:00:00 n 1:30:00 n 1:00:00 n 0:30:00 n OFF

LD function button.

Note

The display dims after you specify the time.

You cannot record the audio and video signal during

You can freely specify the time

5.1 CH/DVD mode.

Press SLEEP on the remote first, then specify the time

you want using the cursor buttons (> or .).

The sleep time changes in 1 minute intervals. You can

specify up to 5 hours.

You can check the time remaining before the

amplifier turns off

Press SLEEP on the remote. The remaining time appears

in the display.

GB

26