Sony STR-DE345: AC Hookups

Getting Started

After connecting all the components, speakers and AC

power cord, output a test tone to check that all the

AC Hookups

speakers are connected correctly. For details on

outputting a test tone, refer to ”Adjusting the speaker

volume”, on page 20.

Connecting the mains lead

Connect the mains lead from this receiver and from

If you have connected rear speakers, be sure to press

your audio/video components to a wall outlet.

the 5.1 CH/DVD button and turn off sound field on

the receiver before outputting a test tone so that the

tone is output individually from the left and right rear

speakers.

If no sound is heard from a speaker while outputting a

test tone or a test tone is output from a speaker other

,

than the one whose name is currently displayed on the

to a wall outlet

receiver, the speaker may be short-circuited. If this

happens, check the speaker connection again.

Where do I go next?

Before you use the receiver, go to the next section to make

Active woofer

sure that all the controls are set to the appropriate positions.

Receiver

Active Woofer

SUB

WOOFER

INPUT

AUDIO OUT

Note

Do not connect any other component.

To listen to the speakers

Make sure that you set the SPEAKERS button to ON.

If your TV monitor uses separate speakers

You can connect one of them to the SPEAKERS

CENTER terminals for use with Dolby Pro Logic

Surround sound (see page 19).

Where do I go next?

To complete your system, go to “AC Hookups” on this page.

GB

9