Sony STR-DE335: Before You Use Your Receiver Storing FM Stations Automatically in Alphabetical

Getting Started

Before You Use Your Receiver

Storing FM Stations

Automatically in Alphabetical

Before turning on the receiver, make sure that you have:

• Turned MASTER VOLUME to the leftmost

Order (“Auto-betical”)

position (0).

• Selected the appropriate speaker system. (See

With “Auto-betical select” you can automatically store

“Selecting the speaker system” on previous page.)

up to 30 FM and FM RDS stations in alphabetical order

• Set BALANCE to the centre position.

without redundancy. Additionally, “Auto-betical

select” only stores the stations with the clearest signals.

Before you use your receiver for the first time or when

If you want to store FM or AM (MW) stations one by

you want to clear the receiver's memory, do the

one, see “Presetting Radio Stations” on page 14.

procedure below:

FM RDS stations are stored first, in alphabetical order

1/u (power)

by their Station Name, followed by regular FM stations

in order of frequency. (For more details on RDS, see

page 15.)

1 Press 1/u (power) to turn off the receiver.

2 Hold down MEMORY and press 1/u (power) to

turn the receiver on.

MUTING

”AUTOBETICAL SELECT” appears and the

receiver scans and stores all the FM and FM RDS

1 Turn off the receiver.

stations in the broadcast area.

“FINISH” appears when the receiver has finished

2 Press 1/u (power) for more than 4 seconds.

storing the FM and FM RDS stations.

“INITIAL” appears in the display and the items

including the following are reset or cleared:

• All preset stations are reset to their factory

To change a preset code to another station

settings.

See ”Presetting Radio Stations” on page 14.

• All sound field parameters are reset to their

To stop Auto-betical before storing all the stations

factory settings.

Press 1/u (power) to turn the receiver off.

• All index names (of preset stations and

Stations currently stored in the preset memory are

programme sources) are cleared.

shifted to the rear (toward C0) and may be erased,

• All adjustments made with the SET UP button are

depending on the number of stations received by Auto-

reset to their factory settings.

betical select.

• The sound field memorized for each programme

Notes

source and preset station is cleared.

• If you move to another area, repeat this procedure to store

stations in your new area.

Turn on the receiver and check the following indicator.

• For details on tuning to the preset stations, see page 14.

• Press MUTING or MUTING on the remote if the

• Once “FINISH” appears, all the previous preset memories

MUTING indicator turns on.

are cleared. Preset AM stations again if necessary.

GB

10