Sony DSC-J10 Blue: Charging the camera

Charging the camera: Sony DSC-J10 Blue

Charging the camera

The battery pack is built into the camera. Charge the camera before using for

the first time.

Countries/regions other than

the USA and Canada

Power cord

Power/Charge lamp

GB

(Mains lead)

Lit: Charging

Off: Charging finished

USB arm

The USA and Canada

Lock release lever

for USB arm

Dedicated USB

connection support

Plug

cable (supplied)

Dedicated USB connection

support cable

Press the ON/OFF (Power) button to turn off the

1

camera.

Slide the lock release lever for USB arm.

2

The USB arm cover opens as shown in the illustration, then the USB

arm comes out.

Connect the AC adaptor to the wall outlet (wall socket).

3

The Power/Charge lamp lights up in orange and charging starts.

Be sure to turn off the camera.

You can charge the partially discharged battery pack.

GB

9

x

To retract the USB arm

Pull out the cable, and then lay the USB arm with finger. Then, the USB arm

cover closes.

Notes

Do not push on the USB arm forcibly.

Be careful not to pinch your finger in the USB arm.

If the USB arm cover is closed, open the USB arm cover and lay the USB arm. Do

not push the USB arm when the USB arm cover is closed.

Use a nearby wall outlet (wall socket) when using the supplied AC Adaptor.

Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any

malfunction occurs while using the camera.

When charging is finished, disconnect the dedicated USB connection support

cable (supplied) from the computer, or the AC Adaptor from the wall outlet (wall

socket).

Make sure to use the supplied AC adaptor or the supplied dedicated USB

connection support cable for charging.

If the Power/Charge lamp does not light up even after connecting the AC adaptor

to the camera and the wall outlet (wall socket), the battery pack is in charging

standby condition as the ambient temperature is out of the appropriate range.

Charging starts and the lamp lights up when the ambient temperature becomes

appropriate for charging. Charging the battery pack in an ambient temperature of

10°C to 30°C (50°F to 86°F) is recommended.

x

Charging the battery pack with a computer

You can charge the battery pack with the dedicated USB connection support

cable.

GB

10

Power/Charge

lamp

Dedicated USB connection

GB

support cable

1 Press the ON/OFF (Power) button to turn off the camera.

2 Connect the camera to the computer that is turned on with the dedicated

USB connection support cable (supplied).

The Power/Charge lamp lights up in orange, and charging starts. The Power/

Charge lamp turns off, charging has completed.

The Power/Charge lamp may turn off when the temperature is outside of the

recommended operating temperature (10°C to 30°C (50°F to 86°F)).

3 When charging is finished, delete the USB connection between the camera

and computer.

Note

Be careful also of the following points:

When you connect the camera to a laptop computer that is not connected to an

AC power source, the battery of the laptop computer may be depleted rapidly.

Do not leave the camera connected to the computer for a long time.

Do not perform start-up, restart, resuming from sleep mode, or shut-down

operations on your computer while the camera is connected. Otherwise the

camera may malfunction. Disconnect the camera from the computer before

performing these operations.

Charging the battery with customized or hand-built computers is not guaranteed.

x

Charging time

Full charge time: approx. 150 min.

Notes

Time required to charge a fully depleted battery pack at a temperature of 25°C

(77°F). Charging may take longer depending on conditions of use and

circumstances.

Besides charging the built-in battery, the supplied AC Adaptor can also be used to

supply power in USB and viewing mode. The camera may not work in shooting

mode because of the voltage reduction the AC adaptor.

GB

11

x

Battery life and number of still images you can

record/view

Recording

Battery life: approx. 105 min./Number of images: approx. 210 images

Viewing

Battery life: approx. 150 min./Number of images: approx. 3000 images

Note

The number of still images that can be recorded is based on the CIPA standard,

and is for shooting under the following conditions.

(CIPA: Camera & Imaging Products Association)

DISP (Screen Display Settings) is set to [Normal].

Shooting once every 30 seconds.

The zoom is switched alternately between the W and T ends.

The flash strobes once every two times.

The power turns on and off once every ten times.

The built-in battery pack is used at an ambient temperature of 25°C (77°F).

x

Supplying the power from the computer

Power can be supplied from the computer even when the camera is turned on.

When importing images to your computer, you can perform the operation

without having to worry about running out of the battery charge.

Note

When changing the settings of the camera, the power is not supplied even though

the dedicated USB connection support cable (supplied) is connected.

GB

12

Оглавление