Pioneer SVM-1000: CONNECTIONS
CONNECTIONS: Pioneer SVM-1000
CONNECTIONS
CONNECTIONS
Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections.
CONNECTING INPUTS
Analog turntable Analog turntableDJ/VJ DVD player or
DJ CD pla
Pioneer DJ/VJ DVD players or DJ CD players
Connecting an analog turntable
Connect the audio output cables from an analog turntable to this
Audio cable connection
unit’s Channel 1 or 4 PHONO input connectors, then set the
Connect the audio output connectors from a DJ/VJ DVD player or
connected channel’s AUDIO INPUT switch (on the upper panel of
DJ CD player to this unit’s DVD input, DVD/LINE input, or LINE
this unit) to [PHONO]. This unit’s PHONO input supports MM
input connectors, then connect the control cable to the same
cartridges.
channel’s CONTROL connector.
Connect the ground wire from an analog turntable to the SIGNAL
Set the connected channel’s AUDIO INPUT selector switch (on
GND terminal of the SVM-1000.
the upper panel of this unit) to [DVD], [LINE], or [DVD/LINE], to
•Note that no PHONO input connector is provided for channel 2
match the selected input connectors.
and 3.
When establishing a digital connection, connect the DJ/VJ DVD
player or DJ CD player’s digital coaxial output connector to either
Connecting other line level output devices
the channel 2 or 3 DIGITAL IN connector of this mixer.
To use a cassette deck or ordinary CD player, connect its audio
output connectors to one of the SVM-1000's LINE input connectors
Video cable connection
(channel 1 to 4).
Connect the video output connectors of a DJ/VJ DVD player or DJ
CD player to this unit's video input connectors, then connect a
sync signal cable (sold separately) to this unit's sync signal output
connector. Set the connected channel’s VIDEO INPUT selector
switch (on the upper panel of this unit) to [DVD], [VIDEO], or [S-
VIDEO], to match the selected input connectors.
10
En
y
DJ/VJ DVD player or
er
DJ CD pla
y
01_SVM-1000_En.book 10 ページ 2007年10月16日 火曜日 午前9時22分
4 3
SIGNAL GND
AUDIO OUT
1 GND 2 HOT
2 1
SIGNAL GND
MASTER
PHONO
DVD LINE
MASTER OUT 1
OUT
REC
DVD/LINE
LINE
BOOTH
DVD PHONO
DVD/LINE
R
L
3 COLD
OUT 2
MONITOR
L
L
MASTER
L
(TRS)
MIC2
LR
L
L
CONTROL
CONTROL
ATT.
CONTROL
-6 dB 0 dB
-3 dB
CONTROL
R
R
R
R
R
POWER
OFF
ON
SYNC
SYNC
SYNC
SYNC
OUT
DIGITAL
DIGITAL OUT
DIGITAL
IN
OUT
OUT
fs (Hz)
IN
OUT
MIDI
48 k 96 k
OUT
DVD
DVD
VIDEO OUT
MASTER
MONITOR
DVD
DVD
AC IN
S-VIDEO
S-VIDEO
COMPONENT COMPOSITE
YC
B CR
S-VIDEO
S-VIDEO
USB
VIDEO
VIDEO
S-VIDEO S-VIDEO
VIDEO
VIDEO
L R L R L RL R L R LR
Cassette deck, etc.
CD player, etc.
er
01_SVM-1000_En.book 11 ページ 2007年10月16日 火曜日 午前9時22分
CONNECTIONS
CONNECTING OUTPUTS
Power amplifier
Cassette deck
Digital input AV amplifier
(RCA plug input
(analog input
(digital input
connectors)
recording device)
recording device)
English
MASTER ATT. switch
LR
L R
4 3
SIGNAL GND
AUDIO OUT
1 GND 2 HOT
21
SIGNAL GND
MASTER
OUT
REC
PHONO
DVD/LINE LINE
DVD
MASTER OUT 1
3 COLD
OUT 2
BOOTH
LINE
DVD PHONO
DVD/LINE
R
L
MONITOR
L
L
MASTER
L
(TRS)
L
L
MIC2
LR
CONTROL
CONTROL
ATT .
-6 dB 0 dB
-3 dB
CONTROL
CONTROL
R
R
R
R
R
POWER
OFF
ON
SYNC
DIGITAL
SYNC
SYNC
SYNC
OUT
IN
OUT
DIGITAL OUT
DIGITAL
fs (Hz)
IN
OUT
OUT
MIDI
48 k 96 k
OUT
DVD
DVD
VIDEO OUT
MASTER
MONITOR
DVD
DVD
AC IN
S-VIDEO
S-VIDEO
COMPONENT COMPOSITE
S-VIDEO
S-VIDEO
USB
YC
B CR
VIDEO
VIDEO
S-VIDEO S-VIDEO
VIDEO
VIDEO
Sampling
frequency
selector switch
Power amplifier
Plasma display Display
Power amplifier
(XLR plug input connectors)
(for monitor)
(for booth monitor)
Audio master output
Recording output
This unit is furnished with balanced output MASTER OUT 1
These are output connectors for recording, supporting RCA plugs.
(supporting XLR plugs), and unbalanced output MASTER OUT 2
(supporting RCA plugs).
Digital output
Using the MASTER ATT. switch, adjust the output level to match
This is a coaxial digital output connector, supporting RCA plugs.
the input sensitivity of the power amplifier used.
The sampling frequency can be set to 96 kHz/24-bit format or
If the operating panel’s MONO/STEREO switch is set to [MONO],
48 kHz/24-bit format to match the connected device.
the master output will be a monaural combination of L+R
Turn power off before changing this switch position.
channels.
Video master output
Booth monitor output
Supports component, composite (RCA, BNC connector) and S-
TRS output for ø 6.3 mm phone plug. The sound volume for this
VIDEO outputs.
output is controlled by the BOOTH MONITOR level dial,
independently of the master output level setting.
Monitor output
Supports composite and S-VIDEO outputs.
11
En
CONNECTIONS
CONNECTING MICROPHONE AND HEADPHONES
Microphone
HEAD PHONES
A microphone with XLR-type or Ø 6.3 mm phone-type plug can be
connected to the MIC 1 connector on the operation panel (upper) .
The MIC 2 jack on the connection panel (rear) can be used to
connect a microphone with Ø 6.3 mm phone-type plug.
• When using a microphone, set the operating panel’s MIC switch
to [ON] or [TALK OVER], and adjust the LEVEL dial as
CROSS FADER
necessary.
ASSIGN
When not using a microphone, it is recommended to set the
MIC switch to [OFF] and rotate the LEVEL dial fully
counterclockwise to the [–∞] side.
PROFESSIONAL S
USB
Microphone 1
CH 1
VIDEO
EX
CH 4
MIC
MIC 1
External video connector
A camera, DVD player or other video output device can be
connected to the CH 1/CH 4 video input connectors on the
operating panel (top).
MIC2
MIDI
OUT
Microphone 2
USB
Headphones
The PHONES jack on the operating panel (upper) can be used to
connect headphones with a Ø 6.3 mm stereo phone plug.
CONNECTING THE POWER CORD
Connect the power cord last.
When all connections are completed, connect one end of the
furnished power cord to the AC inlet on the rear panel, and the
plug on the other end to a household AC outlet, or the auxiliary
power outlet on an amplifier. Use only the furnished power cord for
this connection.
12
En
O
SVM
9
-
01_SVM-1000_En.book 12 ページ 2007年10月16日 火曜日 午前9時22分
8
MONO SPLIT STEREO
7
6
5
4
MIXING
3
2
1
0
CUE
MASTER
LEVEL
0
A THRU B
PHONES
Headphones
USB
CH 1
VIDEO
EX
CH 4
MIC
Video cameras and
devices
MIC 1
Оглавление
- Contents
- CONFIRM FEATURES ACCESSORIES
- NAMES AND FUNCTIONS OF PARTS
- CONNECTIONS
- BASIC OPERATIONS
- USING THE VIDEO FADER FUNCTION
- USING THE EFFECT FUNCTION
- USING THE JPEG VIEWER
- THE VIDEO EQUALIZER FUNCTION
- FADER START FUNCTION
- PERFORM UTILITY SETUP
- HARDWARE SETUP
- TROUBLESHOOTING
- SPECIFICATIONS
- Contenu
- VÉRIFICATION DES CARACTÉRISTIQUES ACCESSOIRES
- NOMS ET FONCTIONS DES ORGANES
- CONNEXIONS
- DÉMARCHES DE BASE
- UTILISATION DE LA FONCTION DE FONDU VIDÉO
- UTILISATION DE LA FONCTION D’EFFET
- UTILISATION DU VISUALISEUR JPEG
- FONCTION D’ÉGALISEUR VIDÉO
- FONCTION DE DÉPART EN FONDU
- EXÉCUTION DE LA CONFIGURATION UTILITAIRE
- CONFIGURATION DU MATÉRIEL
- GUIDE DE DÉPANNAGE
- FICHE TECHNIQUE
- Inhaltsverzeichnis
- ÜBERPRÜFEN DES VORSICHTSHINWEISE MITGELIEFERTEN ZUR HANDHABUNG ZUBEHÖRS
- MERKMALE
- BEZEICHNUNG UND FUNKTION DER BEDIENELEMENTE
- ANSCHLÜSSE
- GRUNDLEGENDE BEDIENUNGSVERFAHREN
- VERWENDUNG DER VIDEOFADER-FUNKTION
- VERWENDUNG DER EFFEKTFUNKTION
- VERWENDUNG DES JPEG VIEWER
- DIE VIDEO EQUALIZER-FUNKTION
- FADER-STARTFUNKTION
- AUSFÜHRUNG DES UTILITY-SETUP
- HARDWARE-SETUP
- STÖRUNGSBESEITIGUNG
- TECHNISCHE DATEN
- Indice
- CONTROLLO DEGLI CARATTERISTICHE ACCESSORI
- NOME DELLE VARIE PARTI E LORO FUNZIONE
- COLLEGAMENTI
- OPERAZIONI DI BASE
- USO DELLA FUNZIONE DI DISSOLVENZA VIDEO
- USO DEGLI EFFETTI
- USO DI JPEG VIEWER
- LA FUNZIONE DI EQUALIZZAZIONE VIDEO
- FUNZIONE DI INIZIO DELLA DISSOLVENZA
- IMPOSTAZIONE DELL'UTILITY DI PERFORMANCE
- IMPOSTAZIONI HARDWARE
- DIAGNOSTICA
- CARATTERISTICHE TECNICHE
- Inhoud
- CONTROLEER DE WAARSCHUWINGEN ACCESSOIRES I.V.M. HET GEBRUIK
- KENMERKEN
- BENAMING EN FUNCTIE VAN DE BEDIENINGSORGANEN
- AANSLUITINGEN
- BASISBEDIENING
- GEBRUIK VAN DE VIDEOFADERFUNCTIE
- GEBRUIK VAN DE EFFECTFUNCTIE
- GEBRUIK VAN DE JPEG VIEWER
- DE VIDEO-EQUALIZER FUNCTIE
- FADERSTARTFUNCTIE
- UTILITY-INSTELLINGEN
- APPARATUUR-INSTELLINGEN
- VERHELPEN VAN STORINGEN
- TECHNISCHE GEGEVENS
- Índice
- CONFIRMACIÓN DE CARACTERÍSTICAS LOS ACCESORIOS
- NOMENCLATURA Y FUNCIONES DE LOS CONTROLES
- CONEXIONES
- OPERACIONES BÁSICAS
- EMPLEO DE LA FUNCIÓN DE FUNDIDO DE VÍDEO
- EMPLEO DE LA FUNCIÓN DE EFECTOS
- EMPLEO DE JPEG VIEWER
- FUNCIÓN DEL ECUALIZADOR DE VÍDEO
- FUNCIÓN DE INICIO CON FUNDIDO
- EFECTÚE LA CONFIGURACIÓN DE UTILIDADES
- CONFIGURACIÓN DE DISPOSITIVOS
- SOLUCIÓN DE PROBLEMAS
- ESPECIFICACIONES
- Содержание
- ПРОВЕРКА НАЛИЧИЯ ФУНКЦИОНАЛЬНЫЕ ПРИНАДЛЕЖНОСТЕЙ ОСОБЕННОСТИ
- ЭЛЕМЕНТЫ УСТРОЙСТВА И ИХ ФУНКЦИИ
- ПОДКЛЮЧЕНИЯ
- ОСНОВНЫЕ ОПЕРАЦИИ
- ПОЛЬЗОВАНИЕ ФУНКЦИЕЙ ВИДЕОФЕЙДЕРА
- ПОЛЬЗОВАНИЕ ФУНКЦИЕЙ НАЛОЖЕНИЯ ЭФФЕКТОВ
- ПОЛЬЗОВАНИЕ ОБОЗРЕВАТЕЛЕМ JPEG (JPEG VIEWER)
- ФУНКЦИЯ ВИДЕОЭКВАЛАЙЗЕРА
- ФУНКЦИЯ ЗАПУСКА ПО ФЕЙДЕРУ
- ВЫПОЛНИТЕ НАСТРОЙКУ ПРОГРАММЫ
- НАСТРОЙКА ОБОРУДОВАНИЯ
- УСТРАНЕНИЕ НЕПОЛАДОК
- ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ