Pioneer mvh-x360bt: инструкция

DIGITAL MEDIA RECEIVER

RECEPTEUR NUMERIQUE MULTIMEDIA

RICEVITORE MULTIMEDIALE DIGITALE

English NederlandsDeutschEspañolItalianoFrançais Русский

RECEPTOR DE MEDIOS DIGITALES

DIGITALER MEDIENEMPFÄNGER

DIGITALE MEDIA-RECEIVER

ЦИФРОВОЙ МЕДИАРЕСИВЕР

Owner’s Manual

Mode d’emploi

MVH-X360BT

Manuale d’istruzioni

Manual de instrucciones

MVH-160UI

Bedienungsanleitung

Handleiding

Руководство пользователя

Section

01

Before you start

Before you start

Thank you for purchasing this PIONEER

About this unit

product

To ensure proper use, please read through this

The tuner frequencies on this unit are allocated

manual before using this product. It is especially

for use in Western Europe, Asia, the Middle

important that you read and observe WARN-

East, Africa and Oceania. Use in other areas

INGs and CAUTIONs in this manual. Please

may result in poor reception. The RDS (radio

keep the manual in a safe and accessible place for

data system) function only works in areas that

future reference.

broadcast RDS signals for FM stations.

WARNING

! Do not attempt to install or service this

product by yourself. Installation or serv-

icing of this product by persons without

training and experience in electronic

equipment and automotive accessories

If you want to dispose this product, do not

may be dangerous and could expose you

mix it with general household waste. There is

to the risk of electric shock, injury or

a separate collection system for used elec-

other hazards.

tronic products in accordance with legislation

! Do not attempt to operate the unit while driv-

that requires proper treatment, recovery and

ing. Make sure to pull off the road and park

recycling.

your vehicle in a safe location before at-

tempting to use the controls on the device.

Private households in the member states of the

EU, in Switzerland and Norway may return their

CAUTION

used electronic products free of charge to desig-

! Do not allow this unit to come into contact

nated collection facilities or to a retailer (if you

with liquids. Electrical shock could result.

purchase a similar new one).

Also, damage to this unit, smoke, and over-

For countries not mentioned above, please con-

heating could result from contact with

tact your local authorities for the correct method

liquids.

of disposal.

! The Pioneer CarStereo-Pass is for use only in

By doing so you will ensure that your disposed

Germany.

product undergoes the necessary treatment, re-

! Always keep the volume low enough to hear

covery and recycling and thus prevent potential

outside sounds.

negative effects on the environment and human

! Avoid exposure to moisture.

health.

If you experience problems

Should this unit fail to work properly, please con-

tact your dealer or nearest authorized PIONEER

Service Station.

2

En

Head unit

b7 86

1 3 52

4

9 a c

Display indication

2 5 7 9

31 4 86

a

db

1 SRC/OFF

2 MULTI-CONTROL (M.C.)

3

(list)

4 DISP

5 USB port

(phone)

MVH-X360BT

6

iPod

MVH-160UI

7 BAND/

(iPod control)

8

(back)/DIMMER (dimmer)

9 c/d

a 1/

to 6/

b AUX input jack (3.5 mm stereo jack)

c Detach button

CAUTION

Use an optional Pioneer USB cable (CD-U50E)

to connect the USB storage device as any device

connected directly to the unit will protrude out

from the unit, which could be dangerous.

c

Section

Using this unit

Using this unit

02

Set up menu

FM STEP (FM tuning step)

English

1 After installation of this unit, turn the

Use FM STEP to set FM tuning step options (seek

ignition switch to ON.

step settings).

SET UP appears.

1 Turn M.C. to select the FM tuning step.

100 (100 kHz)—50 (50 kHz)

2 Turn M.C. to switch to YES.

2 Press M.C. to confirm the selection.

# If you do not use the unit for 30 seconds, the set

QUIT appears.

up menu will not be displayed.

! The manual tuning step is fixed at 50 kHz.

# If you prefer not to set up at this time, turn M.C.

! When AF and TA are turned off, the seek step

to switch to NO.

is fixed at 50 kHz even if set to 100.

1 (list)

(iPod control)

3 Press M.C. to select.

5 To finish your settings, turn M.C. to select

2

This unit’s iPod function is operated from

4 Follow these steps to set the menu.

YES.

your iPod.

To proceed to the next menu option, you need to

# If you prefer to change your setting again, turn

3 Sub information section

confirm your selection.

M.C. to switch to NO.

4 TA (traffic announcements)

6 Press M.C. to select.

LANGUAGE (multi-language)

5 TP (traffic program identification)

This unit can display the text information from a

Notes

6

(sound retriever)

compressed audio file even for information em-

! You can set up the menu options from the

7 LOC (local seek tuning)

bedded in English, Russian or Turkish.

system menu and initial menu. For details

! If the embedded language and the selected

about the settings, refer to System menu on

8

(repeat)

language setting are not the same, text infor-

page 12 and Initial menu on page 13.

9

(random/shuffle)

mation may not display properly.

! You can cancel set up menu by pressing

! Some characters may not be displayed prop-

SRC/OFF.

(auto answer)

erly.

Only for MVH-X360BT

a

1 Turn M.C. to select the desired setting.

Shows when the automatic answering func-

Basic operations

ENG (English)—РУС (Russian)—TUR (Turk-

tion is on.

ish)

Important

Main information section

2 Press M.C. to confirm the selection.

! Handle the front panel with care when re-

! Tuner: band and frequency

CLOCK SET (setting the clock)

moving or attaching it.

! RDS: program service name, PTY infor-

! Avoid subjecting the front panel to excessive

b

mation and other literal information

1 Turn M.C. to adjust hour.

shock.

! USB storage device and iPod: elapsed

2 Press M.C. to select minute.

! Keep the front panel out of direct sunlight

playback time and text information

3 Turn M.C. to adjust minute.

and high temperatures.

4 Press M.C. to confirm the selection.

! To avoid damaging the device or vehicle inte-

(Bluetooth indicator)

c

rior, remove any cables and devices attached

Only for MVH-X360BT

to the front panel before detaching it.

d

Appears when a lower tier of folder or menu

exists.

En

3

Section

02

Using this unit

Using this unit

Removing the front panel

Selecting a source

Radio

Switching the display

1 Press the detach button to release the front

1 Press SRC/OFF to cycle between:

Basic operations

panel.

RADIO—USB/iPod—APP (application)—AUX

Selecting the desired text information

2 Push the front panel upward (M) and then pull

—BT AUDIO

1 Press DISP to cycle between the following:

it toward (N) you.

! USB MTP displays while the MTP connection

Selecting a band

! FREQUENCY (program service name or

is in use.

1 Press BAND/

until the desired band (FM1,

frequency)

! Only for MVH-160UI

FM2,FM3 for FM or MW/LW) is displayed.

! BRDCST INFO (program service name/PTY

When there is an iPod connected and a source

information)

Switching preset stations

other than iPod is selected, you can switch to

! CLOCK (source name and clock)

1 Press c or d.

iPod by pressing iPod.

! Select PCH (preset channel) under SEEK to

Notes

! BT AUDIO is not available for MVH-160UI.

use this function.

! If the program service name cannot be ac-

3 Always store the detached front panel in a pro-

Adjusting the volume

Manual tuning (step by step)

quired in FREQUENCY, the broadcast fre-

tective case or bag.

1 Turn M.C. to adjust the volume.

1 Press c or d.

quency is displayed instead. If the program

Re-attaching the front panel

! Select MAN (manual tuning) under SEEK to

service name is detected, the program serv-

1 Slide the front panel to the left.

Note

use this function.

ice name will be displayed.

When this unit’s blue/white lead is connected to

! Depending on the band, text information can

Seeking

the vehicle’s auto-antenna relay control termi-

be changed.

1 Press and hold c or d, and then release.

nal, the vehicle’s antenna extends when this

! Text information items that can be changed

You can cancel seek tuning by briefly pressing

unit’s source is turned on. To retract the anten-

depend on the area.

c or d.

na, turn the source off.

While pressing and holding c or d, you can

skip stations. Seek tuning starts as soon as

Using PTY functions

2 Press the right side of the front panel until it is

you release c or d.

You can tune in to a station using PTY (program

Frequently used menu

firmly seated.

type) information.

operations

Notes

Forcing the front panel into place may result in

! For details about SEEK, refer to SEEK (left/

damage to the front panel or head unit.

Searching for an RDS station by PTY information

Returning to the previous display

right key setting) on page 5.

1 Press

(list).

Turning the unit on

Returning to the previous list (the folder one level

! This unit’s AF (alternative frequencies

2 Turn M.C. to select a program type.

1 Press SRC/OFF to turn the unit on.

higher)

search) function can be turned on and off.

NEWS/INFO—POPULAR—CLASSICS—

1 Press

/DIMMER.

AF should be off for normal tuning operation

Turning the unit off

OTHERS

(refer to AF (alternative frequencies search)

1 Press and hold SRC/OFF until the unit turns

Returning to the ordinary display

3 Press M.C. to begin the search.

on page 5).

off.

Canceling the main menu

The unit searches for a station broadcasting

1 Press BAND/

.

that type of program. When a station is found,

Storing and recalling stations

its program service name is displayed.

Returning to the ordinary display from the list

for each band

! To cancel the search, press M.C. again.

1 Press BAND/

.

! The program of some stations may differ

Using preset tuning buttons

from that indicated by the transmitted PTY.

1 To store: Press and hold down one of the

! If no station is broadcasting the type of

preset tuning buttons (1/

to 6/ ) until

program you searched for, NOT FOUND is

the number stops flashing.

displayed for about two seconds and then

the tuner returns to the original station.

2 To recall: Press one of the preset tuning

buttons (1/

to 6/ ).

4

En

Section

Using this unit

Using this unit

02

PTY list

When AF is used, the regional function limits the

USB storage device

Returning to root folder

For more details about PTY list, visit the follow-

English

selection of stations to those broadcasting region-

1 Press and hold BAND/

.

ing site:

MTP connection

al programs.

http://www.pioneer.eu/eur/products/25/121/tech/

1 Press M.C. to turn the regional function on or

MTP-compatible Android devices (running

Switching between playback memor y devices

CarAudio/PTY.html

off.

Android OS 4.0 or higher) can be connected by

You can switch between playback memory devices

MTP connection using the USB source. To con-

on USB storage devices with more than one Mass

Function settings

LOCAL (local seek tuning)

nect an Android device, use the cable that came

Storage Device-compatible memory device.

with the device.

1 Press BAND/

.

Local seek tuning allows you to tune in to only

1 Press M.C. to display the main menu.

! You can switch between up to 32 different

those radio stations with sufficiently strong sig-

Notes

memory devices.

nals for good reception.

2 Turn M.C. to change the menu option

! This function is not compatible with MIX-

1 Press M.C. to select the desired setting.

and press to select FUNCTION.

TRAX.

Note

FM: OFF—LV1—LV2—LV3—LV4

! This function is not compatible with WAV.

Disconnect USB storage devices from the unit

MW/LW: OFF—LV1—LV2

3 Turn M.C. to select the function.

when not in use.

The highest level setting allows reception of

Once selected, the following functions can be

Basic operations

only the strongest stations, while lower levels

adjusted.

Operations using the MIXTRAX

allow the reception of weaker stations.

# If MW/LW band is selected, only BSM, LOCAL

Playing songs on a USB storage device

button

and SEEK are available.

TA (traffic announcement standby)

1 Open the USB port cover.

2 Plug in the USB storage device using a USB

Turning MIXTRAX on or off

FM SETTING (FM sound quality settings)

1 Press M.C. to turn traffic announcement

cable.

Only for MVH-X360BT

standby on or off.

The sound quality level can be set to match the

You cannot use this function with USB MTP.

Stopping playback of files on a USB storage de-

broadcast signal conditions of the FM band sig-

AF (alternative frequencies search)

1 Press 3/MIX to turn MIXTRAX on or off.

vice

nal.

! For more details about MIXTRAX, refer to

1 You may disconnect the USB storage device at

1 Press M.C. to display the setting mode.

1 Press M.C. to turn AF on or off.

About MIXTRAX on page 13.

any time.

2 Turn M.C. to select the desired setting.

! When MIXTRAX is in use, the sound retriever

NEWS (news program interruption)

! STANDARD – This is the standard setting.

Selecting a folder

function is disabled.

! HI-FI – This is the setting to use to prioritize

1 Press 1/

or 2/ .

1 Press M.C. to turn the NEWS function on or

the high quality of stereo sound.

off.

Selecting a track

Switching the display

! STABLE – This is the setting to use to priori-

1 Press c or d.

tize the low noise of monaural sound.

SEEK (left/right key setting)

Fast forwarding or reversing

Selecting the desired text information

BSM (best stations memory)

You can assign a function to the left and right keys

1 Press and hold c or d.

1 Press DISP to cycle between the following:

of the unit.

BSM (best stations memory) automatically stores

! When playing compressed audio, there is no

MP3/WMA/WAV

Select MAN (manual tuning) to tune up or down

the six strongest stations in the order of their sig-

sound during fast forward or reverse.

! TRACK INFO (track title/artist name/album

manually or select PCH (preset channel) to switch

nal strength.

title)

between preset channels.

1 Press M.C. to turn BSM on.

! FILE INFO (file name/folder name)

1 Press M.C. to select MAN or PCH.

To cancel, press M.C. again.

! ELAPSED TIME (track number and play-

back time)

REGIONAL (regional)

! CLOCK (source name and clock)

! SPEANA (spectrum analyzer)

En

5

Section

02

Using this unit

Using this unit

Selecting and playing files/

Pausing playback

iPod

Switching the display

tracks from the name list

1 Press 4/PAUSE to pause or resume.

Basic operations

Selecting the desired text information

1 Press

to switch to the file/track name

Enhancing compressed audio and restoring rich

1 Press DISP to cycle between the following:

list mode.

sound (sound retriever)

Playing songs on an iPod

! TRACK INFO (track title/artist name/album

Only for MVH-160UI

1 Open the USB port cover.

title)

2 Use M.C. to select the desired file name

1 Press 3/S.Rtrv to cycle between:

2 Connect an iPod to USB input.

! ELAPSED TIME (track number and play-

(or folder name).

1—2—OFF (off)

Playback is performed automatically.

back time)

1 is effective for low compression rates, and 2

! CLOCK (source name and clock)

Selecting a song (chapter)

Selecting a file or folder

is effective for high compression rates.

! SPEANA (spectrum analyzer)

! Key operation is disabled when MIXTRAX is

1 Press c or d.

1 Turn M.C.

on.

Selecting an album

Playing

1 Press 1/

or 2/ .

Browsing for a song

1 When a file or track is selected, press M.C.

Function settings

Fast forwarding or reversing

1 Press

to switch to the top menu of list

Viewing a list of the files (or folders) in the se-

1 Press and hold c or d.

search.

lected folder

1 Press M.C. to display the main menu.

1 When a folder is selected, press M.C.

Notes

2 Use M.C. to select a category/song.

Playing a song in the selected folder

2 Turn M.C. to change the menu option

! The iPod cannot be turned on or off when the

1 When a folder is selected, press and hold M.C.

and press to select FUNCTION.

control mode is set to CTRL AUDIO.

Changing the name of the song or category

Once selected, the function below can be ad-

! Disconnect headphones from the iPod be-

1 Turn M.C.

justed.

fore connecting it to this unit.

Playlists—artists—albums—songs—podcasts

Operations using special buttons

! S.RTRV is not available when MIXTRAX is

! The iPod will turn off about two minutes after

—genres—composers—audiobooks

turned on.

the ignition is switched off.

Selecting a repeat play range

Playing

1 Press 6/

to cycle between the following:

S.RTRV (sound retriever)

1 When a song is selected, press M.C.

Operations using the MIXTRAX

! ALL – Repeat all files

Automatically enhances compressed audio and

button

Viewing a list of songs in the selected category

! ONE – Repeat the current file

restores rich sound.

1 When a category is selected, press M.C.

! FLD – Repeat the current folder

1 Press M.C. to select the desired setting.

Turning MIXTRAX on or off

Playing a song in the selected category

Playing tracks in random order

For details, refer to Enhancing compressed

Only for MVH-X360BT

1 When a category is selected, press and hold

1 Press 5/

to turn random play on or off.

audio and restoring rich sound (sound retriever)

1 Press 3/MIX to turn MIXTRAX on or off.

M.C.

Tracks in a selected repeat range are played in

on page 6.

! For more details about MIXTRAX, refer to

random order.

About MIXTRAX on page 13.

Searching the list by alphabet

! To change songs during random play, press d

1 When a list for the selected category is dis-

to switch to the next track. Pressing c restarts

played, press

to switch to alphabet search

playback of the current track from the begin-

mode.

ning of the song.

! You also can switch to alphabet search

mode by turning M.C. twice.

2 Turn M.C. to select a letter.

3 Press M.C. to display the alphabetical list.

! To cancel searching, press

/DIMMER.

6

En

Section

Using this unit

Using this unit

02

Notes

Playing songs related to the

! CTRL AUDIO – This unit’s iPod function can

S.RTRV (sound retriever)

! You can play playlists created with the com-

be controlled by using this unit.

English

currently playing song

puter application (MusicSphere). The appli-

Only for MVH-160UI

You can play songs from the following lists.

1 Press M.C. to select the desired setting.

cation will be available on our website.

You can also switch the control mode by press-

• Album list of the currently playing artist

For details, refer to Enhancing compressed

! Playlists that you created with the computer

ing iPod.

• Song list of the currently playing album

audio and restoring rich sound (sound retriever)

application (MusicSphere) are displayed in

• Album list of the currently playing genre

Notes

on page 7.

abbreviated form.

! Switching the control mode to CTRL iPod

1 Press and hold

to switch to link play

pauses song playback. Use the iPod to re-

Operations using special buttons

mode.

sume playback.

Using connected device

! The following operations are still accessible

Selecting a repeat play range

applications

2 Turn M.C. to change the mode; press to

from the unit even if the control mode is set

1 Press 6/

to cycle between the following:

select.

to CTRL iPod.

You can use this unit to perform streaming play-

! ONE – Repeat the current song

! ARTIST – Plays an album by the artist cur-

— Pausing

back of and control tracks in iPhone or smart-

! ALL – Repeat all songs in the selected list

rently playing.

— Fast forward/reverse

phone applications or just for streaming

! When the control mode is set to CTRL iPod,

! ALBUM – Plays a song from the album cur-

— Selecting a song (chapter)

playback.

the repeat play range will be same as what is

rently being played.

! The volume can only be adjusted from this

set for the connected iPod.

! GENRE – Plays an album from the genre cur-

unit.

rently being played.

Important

Selecting a random play range (shuffle)

1 Press 5/

to cycle between the following:

The selected song/album will be played after the

Function settings

Use of third party apps may involve or require

! SNG – Play back songs in the selected list

currently playing song.

the provision of personally identifiable infor-

1 Press M.C. to display the main menu.

in random order.

mation, whether through the creation of a

Notes

! ALB – Play back songs from a randomly se-

user account or otherwise, and for certain ap-

! The selected song/album may be canceled if

2 Turn M.C. to change the menu option

lected album in order.

plications, the provision of geolocation data.

you use functions other than link search (e.g.

and press to select FUNCTION.

! OFF – Not play back in random order.

ALL THIRD PARTY APPS ARE THE SOLE RE-

fast forward and reverse).

SPONSIBILITY OF THE PROVIDERS, INCLUD-

Playing all songs in random order (shuffle all)

! Depending on the song selected to play, the

3 Turn M.C. to select the function.

ING WITHOUT LIMITATION COLLECTION AND

1 Press and hold 5/

to turn shuffle all on.

end of the currently playing song and the be-

Once selected, the following functions can be

SECURITY OF USER DATA AND PRIVACY

! To turn off shuffle all, select OFF in shuffle. For

ginning of the selected song/album may be

adjusted.

PRACTICES. BY ACCESSING THIRD PARTY

details, refer to Selecting a random play range

cut off.

! AUDIO BOOK is not available when

APPS, YOU AGREE TO REVIEW THE TERMS

(shuffle) on page 7.

CTRL iPod is selected in the control mode.

OF SERVICE AND PRIVACY POLICIES OF THE

Using this unit’s iPod function

For details, refer to Using this unit’s iPod func-

Pausing playback

PROVIDERS. IF YOU DO NOT AGREE WITH

1 Press 4/PAUSE to pause or resume.

from your iPod

tion from your iPod on page 7.

THE TERMS OR POLICIES OF ANY PROVIDER

This unit’s iPod function can be controlled by

OR DO NOT CONSENT TO THE USE OF GEO-

Enhancing compressed audio and restoring rich

AUDIO BOOK (audiobook speed)

using the connected iPod.

LOCATION DATA WHERE APPLICABLE, DO

sound (sound retriever)

CTRL iPod is not compatible with the following

NOT USE THAT THIRD PARTY APP.

Only for MVH-160UI

1 Press M.C. to display the setting mode.

iPod models.

1 Press 3/S.Rtrv to cycle between:

2 Turn M.C. to select your favorite setting.

! iPod nano 1st generation

1—2—OFF (off)

! FASTER – Playback at a speed faster than

! iPod with video

Information for compatibility of

1 is effective for low compression rates, and 2

normal

connected devices

is effective for high compression rates.

! NORMAL – Playback at normal speed

% Press BAND/

to switch the control

! SLOWER – Playback at a speed slower

The following is the detailed information regard-

mode.

than normal

ing the terminals required to use the application

! CTRL iPod – This unit’s iPod function can be

for iPhone or smartphone on this unit.

operated from the connected iPod.

En

7

Section

02

Using this unit

Using this unit

For iPhone users

Starting procedure for

2 Turn M.C. to change the menu option

Setting up for hands-free phoning

! This function is compatible with iPhone and

smartphone users

and press to select FUNCTION.

iPod touch.

Only for MVH-X360BT

1 Connection

! The device has iOS 5.0 or higher.

3 Turn M.C. to select the function.

Use the Bluetooth telephone connection

Once selected, the following functions can be

1 Connect your smartphone to this unit

menu. Refer to Connection menu operation on

For smartphone users

adjusted.

using Bluetooth wireless technology. For de-

page 9.

! The device has Android OS 2.3 or later.

tails, refer to Connection menu operation on

2 Function settings

! The device supports Bluetooth SPP (Serial

PAUSE (pause)

page 9.

Use the Bluetooth telephone function menu.

Port Profile) and A2DP (Advanced Audio Dis-

Refer to Phone menu operation on page 10.

tribution Profile).

1 Press M.C. to pause or resume.

2 Select BLUETOOTH in APP CONN. SET. For

The device is connected to this unit via

details, refer to APP CONN. SET (APP connect

S.RTRV (sound retriever)

Bluetooth.

mode setting) on page 13.

Basic operations

! Compatibility with all Android devices is not

1 Press M.C. to select the desired setting.

guaranteed.

3 Switch the source to APP.

1—2—OFF (off)

Making a phone call

For details about Android device compatibil-

1 is effective for low compression rates, and 2

1 Refer to Phone menu operation on page 10.

ity with this unit, refer to the information on

4 Start up the application on the smart-

is effective for high compression rates.

our website.

Answering an incoming call

phone and initiate playback.

1 When a call is received, press

.

Notes

! Please check our website for a list of sup-

Basic operations

Using Bluetooth wireless

Ending a call

1 Press

.

ported iPhone or smartphone applications

technology

for this unit.

Selecting a track

Rejecting an incoming call

1 Press c or d.

Only for MVH-X360BT

! Pioneer is not liable for any issues that may

1 When a call is received, press and hold

.

arise from incorrect or flawed app-based

Fast forwarding or reversing

Using the Bluetooth telephone

Answering a call waiting

content.

1 Press and hold c or d.

Important

1 When a call is received, press

.

! The content and functionality of the sup-

ported applications are the responsibility of

Pausing playback

! Leaving the unit on standby to connect to

Switching between callers on hold

the App providers.

1 Press BAND/

to pause or resume.

your phone via Bluetooth while the engine is

1 Press M.C.

not running can drain the battery.

Canceling call waiting

Starting procedure for iPhone users

! Operations may vary depending on the kind

Switching the display

1 Press and hold

.

of cellular phone.

1 Connect an iPhone to USB input.

! Advanced operations that require attention

Adjusting the other party’s listening volume

Selecting the desired text information

such as dialing numbers on the monitor,

1 Press c or d while talking on the phone.

2 Select WIRED in APP CONN. SET. For de-

1 Press DISP to cycle between the following:

using the phone book, etc., are prohibited

! When private mode is on, this function is not

tails, refer to APP CONN. SET (APP connect

! TRACK INFO (track title/artist name/album

while driving. Be sure to park your vehicle in

available.

mode setting) on page 13.

title)

a safe place and apply the parking brake be-

If using MVH-160UI, proceed to the next step.

! APP NAME (application name)

Turning private mode on or off

fore proceeding.

! ELAPSED TIME (playback time)

1 Press BAND/

while talking on the phone.

3 Switch the source to APP.

! CLOCK (source name and clock)

! SPEANA (spectrum analyzer)

Note

4 Start up the application on the iPhone

If private mode is selected on the cellular phone,

and initiate playback.

hands-free phoning may not be available.

Function settings

1 Press M.C. to display the main menu.

8

En

Section

Using this unit

Using this unit

02

Storing and recalling phone numbers

! In order for your voice commands to be rec-

DEVICELIST (connecting or disconnecting a de-

ognized and interpreted correctly, ensure

1 Press M.C. to start searching.

English

1 To store: Press and hold down one of the

vice from the device list)

that conditions are suitable for recognition.

! To cancel, press M.C. while searching.

preset tuning buttons (1/

to 6/ ).

! Please note that wind blowing through the

! If this unit fails to find any available cellular

The functions below can be used to store phone

1 Press M.C. to display the setting mode.

vehicle windows and noise coming from out-

phones, NOT FOUND is displayed.

numbers to the memory. For details, refer to

2 Turn M.C. to select the name of a device you

side the vehicle can interfere with voice com-

2 Turn M.C. to select a device from the device

Phone menu operation on page 10.

want to connect/disconnect.

mand operation.

list.

! MISSED (missed call history)

! Press and hold M.C. to swap between the

! For optimum pick-up, the microphone should

! If the desired device is not displayed, select

! DIALLED (dialed call history)

Bluetooth device address and the device

be placed directly in front of the driver at a

RE-SEARCH.

! RECEIVED (received call history)

name.

suitable distance.

! Press and hold M.C. to swap between the

! PHONE BOOK (phone book)

3 Press M.C. to connect/disconnect the selected

! Speaking too soon after the start of the com-

Bluetooth device address and the device

device.

mand may cause voice recognition to fail.

name.

2 To recall: Press one of the preset tuning

If the connection is established, * is indicated

! Speak slowly, deliberately, and clearly.

3 Press M.C. to connect the selected device.

buttons (1/

to 6/ ).

on the device name.

! To complete the connection, check the de-

! When no device is selected in the device list,

Connection menu operation

vice name (Pioneer BT Unit) and enter the

3 Press M.C. to make a call.

this function is not available.

PIN code on your device.

Important

DEL DEVICE (deleting a device from the device

! PIN code is set to 0000 as the default. You

Connected devices may not work properly if

Switching the display

list)

can change this code.

more than one Bluetooth device is connected at

! A 6-digit number may display on both this

a time (e.g. a phone and a separate audio player

Selecting the desired text information

1 Press M.C. to display the setting mode.

unit and the Bluetooth device.

are connected simultaneously).

You can change the display during a call.

2 Turn M.C. to select the name of a device you

Select yes if the 6-digit numbers displayed

1 Press DISP to cycle between the following:

want to delete.

on this unit and the Bluetooth device are

1 Press and hold

to display the connec-

! Call time

! Press and hold M.C. to swap between the

the same.

tion menu.

! Name of other party

Bluetooth device address and the device

! 6-digit number appears on the display of

# You cannot perform this step during a call.

! Number of other party

name.

this unit. Once the connection is estab-

3 Press M.C. to display DELETE YES.

lished, this number disappears.

2 Turn M.C. to select the function.

4 Press M.C. to delete the device information

! If you are unable to complete the connec-

Once selected, the following functions can be

Using voice recognition

from the device list.

tion using this unit, use the device to con-

adjusted.

! When no device is selected in the device list,

This feature can be used on an iPhone equipped

nect to the unit.

this function is not available.

with voice recognition that is connected by

! If three devices are already paired, DEVICE-

! While this function is in use, do not turn off

Bluetooth.

FULL is displayed and it is not possible to

the engine.

perform this operation. In this case, delete

1 Press and hold M.C. to switch to voice

a paired device first.

ADD DEVICE (connecting a new device)

recognition mode.

A. CONN (connecting to a Bluetooth device auto-

matically)

2 Press M.C. and then talk into the micro-

phone to input voice commands.

1 Press M.C. to turn automatic connection on or

To end voice recognition mode, press BAND/

.

off.

Notes

VISIBLE (setting the visibility of this unit)

! For details on voice recognition features,

check the manual for your iPhone.

En

9