Pioneer MVH-150UI: инструкция

RDS MEDIA CENTER RECEIVER

AUTORADIO MULTIMEDIA RDS

RICEVITORE MULTIMEDIALE CON RDS

English NederlandsDeutschEspañolItalianoFrançais Русский

RECEPTOR Y CENTRO DE COMUNICACIONES RDS

RDS-MULTIMEDIA-EMPFÄNGER

RDS MEDIA CENTER ONTVANGER

ЦИФРОВОЙ МЕДИА-РЕСИВЕР

Owner’s Manual

Mode d’emploi

MVH-350BT

Manuale d’istruzioni

Manual de instrucciones

MVH-150UI

Bedienungsanleitung

Handleiding

Руководство пользователя

Section

01

Before you start

Before you start

Thank you for purchasing this PIONEER

About this unit

product

To ensure proper use, please read through this

The tuner frequencies on this unit are allocated

manual before using this product. It is especially

for use in Western Europe, Asia, the Middle

important that you read and observe WARN-

East, Africa and Oceania. Use in other areas

INGs and CAUTIONs in this manual. Please

may result in poor reception. The RDS (radio

keep the manual in a safe and accessible place for

data system) function only operates in areas

future reference.

with broadcasting RDS signals for FM stations.

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result.

Also, damage to this unit, smoke, and over-

heating could result from contact with

liquids.

If you want to dispose this product, do not

! The Pioneer CarStereo-Pass is for use only in

mix it with general household waste. There is

Germany.

a separate collection system for used elec-

! Always keep the volume low enough to hear

tronic products in accordance with legislation

outside sounds.

that requires proper treatment, recovery and

! Avoid exposure to moisture.

recycling.

! If the battery is disconnected or discharged,

any preset memory will be erased.

Private households in the member states of the

Note

EU, in Switzerland and Norway may return their

Function setting operations are completed even

used electronic products free of charge to desig-

if the menu is canceled before the operations

nated collection facilities or to a retailer (if you

are confirmed.

purchase a similar new one).

For countries not mentioned above, please con-

tact your local authorities for the correct method

About this manual

of disposal.

! In the following instructions, USB memories

By doing so you will ensure that your disposed

and USB audio players are collectively re-

product undergoes the necessary treatment, re-

ferred to as “USB storage device”.

covery and recycling and thus prevent potential

! In this manual, iPod and iPhone will be re-

negative effects on the environment and human

ferred to as “iPod”.

health.

In case of trouble

Should this unit fail to operate properly, please

contact your dealer or nearest authorized

PIONEER Service Station.

2

En

Head unit

4

1 2 3 5

Display indication

2 5 7 9

31 4 86

a

db

Part Part

BAND/

(iPod

1 SRC/OFF 7

control)

(back)/

MULTI-CONTROL

2

8

DIMMER

(M.C.)

(dimmer)

3

(list) 9 c/d

4 DISP a 1/

to 6/

AUX input jack

5 USB port b

(3.5 mm stereo

jack)

MVH-350BT

(phone)

6

c Detach button

MVH-150UI

iPod

CAUTION

! Use an optional Pioneer USB cable (CD-

U50E) to connect the USB storage device as

any device connected directly to the unit will

protrude out from the unit, which could be

dangerous.

! Do not use unauthorized products.

Section

Operating this unit

Operating this unit

02

4 Perform the following procedures to set

Indicator State

the menu.

English

To proceed to the next menu option, you need to

! Tuner: band and fre-

confirm your selection.

quency

! RDS: program service

Main infor-

LANGUAGE (multi-language)

name, PTY information

b

mation sec-

and other literal informa-

This unit can display the text information from a

tion

tion

compressed audio file even for information em-

! USB storage device and

bedded in English or Russian.

iPod: elapsed playback

! If the embedded language and the selected

Indicator State

time and text information

language setting are not the same, text infor-

mation may not display properly.

The list function is being oper-

Only for MVH-350BT

1

(list)

! Some characters may not be displayed prop-

ated.

Connected to a Bluetooth de-

c

(Bluetooth

erly.

vice.

(iPod

This unit’s iPod function is op-

indicator)

1 Turn M.C. to select the desired setting.

2

The line is on hold.

control)

erated from your iPod.

ENG (English)—РУС (Russian)

Appears when a lower tier of

2 Press M.C. to confirm the selection.

Sub infor-

d

folder or menu exists.

3

mation sec-

Sub information is displayed.

CLOCK SET (setting the clock)

tion

1 Turn M.C. to adjust hour.

TA (traffic

Set up menu

2 Press M.C. to select minute.

4

announce-

TA function is on.

When you turn the ignition switch to ON after in-

3 Turn M.C. to adjust minute.

ments)

stallation, set up menu appears on the display.

4 Press M.C. to confirm the selection.

TP (traffic

You can set up the menu options below.

FM STEP (FM tuning step)

program

5

A TP station is tuned in.

identifica-

1 After installation of this unit, turn the

Normally, the FM tuning step employed by seek

tion)

ignition switch to ON.

tuning is 50 kHz. When AF or TA is on, the tuning

SET UP appears.

step automatically changes to 100 kHz. It may be

The sound retriever function

preferable to set the tuning step to 50 kHz when

6

(sound re-

is on.

2 Turn M.C. to switch to YES.

AF is on.

triever)

# If you do not operate for 30 seconds, the set up

! The tuning step remains at 50 kHz during man-

7 LOC Local seek tuning is on.

menu will not be displayed.

ual tuning.

# If you prefer not to set up at this time, turn M.C.

1 Turn M.C. to select the FM tuning step.

8

(repeat) Track or folder repeat is on.

to switch to NO. Press to select.

50 (50 kHz)—100 (100 kHz)

Random play is on.

If you select NO, you cannot set up in the set up

2 Press M.C. to confirm the selection.

(ran-

The iPod source is selected

menu.

QUIT appears.

9

dom/shuf-

and the shuffle or shuffle all

fle)

function is on.

3 Press M.C. to select.

5 To finish your settings, turn M.C. to select

Only for MVH-350BT

YES.

(auto an-

a

Shows when the automatic

# If you prefer to change your setting again, turn

swer)

answering function is on.

M.C. to switch to NO. Press to select.

En

3

Section

02

Operating this unit

Operating this unit

6 Press M.C. to select.

Removing the front panel to protect your unit from

Selecting a source

Tuner

Notes

theft

1 Press SRC/OFF to cycle between:

Basic operations

! You can set up the menu options from the

1 Press the detach button to release the front

TUNER (tuner)—USB (USB)/iPod (iPod)—

system menu. For details about the settings,

panel.

AUX (AUX)—BT AUDIO (Bluetooth audio)

refer to System menu on page 11.

2 Push the front panel upward (M) and then pull

! BT AUDIO is not available for MVH-150UI.

Selecting a band

1 Press BAND/

until the desired band (FM1,

! You can cancel set up menu by pressing

it toward (N) you.

! Only for MVH-150UI

FM2,FM3 for FM or MW/LW) is displayed.

SRC/OFF.

When there is an iPod connected and a source

other than iPod is selected, you can switch to

Switching preset stations

iPod by pressing iPod.

1 Press c or d.

Basic operations

Adjusting the volume

! Select PCH (preset channel) under SEEK to

Important

1 Turn M.C. to adjust the volume.

use this function. For details about the set-

tings, refer to SEEK (left/right key setting) on

! Handle gently when removing or attaching

3 Always keep the detached front panel in a pro-

the next page.

the front panel.

tection device such as a protection case.

! Avoid subjecting the front panel to excessive

CAUTION

Manual tuning (step by step)

shock.

Re-attaching the front panel

For safety reasons, park your vehicle when re-

1 Press c or d.

! Keep the front panel out of direct sunlight

1 Slide the front panel to the left.

moving the front panel.

! Select MAN (manual tuning) under SEEK to

and high temperatures.

Make sure to insert the tabs on the left side of

use this function. For details about the set-

! To avoid damaging the device or vehicle inte-

the head unit into the slots on the front panel.

Note

tings, refer to SEEK (left/right key setting) on

rior, remove any cables and devices attached

When this unit’s blue/white lead is connected to

the next page.

to the front panel before detaching it.

the vehicle’s auto-antenna relay control termi-

Seeking

nal, the vehicle’s antenna extends when this

1 Press and hold c or d, and then release.

unit’s source is turned on. To retract the anten-

You can cancel seek tuning by briefly pressing

na, turn the source off.

c or d.

While pressing and holding c or d, you can

2 Press the right side of the front panel until it is

Frequently used menu

skip stations. Seek tuning starts as soon as

firmly seated.

you release c or d.

operations

If you cannot attach the front panel to the

Note

head unit successfully, make sure that you are

Returning to the previous display

This unit’s AF (alternative frequencies search)

placing the front panel onto the head unit cor-

Returning to the previous list (the folder one level

function can be turned on and off. AF should be

rectly. Forcing the front panel into place may

higher)

off for normal tuning operation (refer to AF (al-

result in damage to the front panel or head

1 Press

/DIMMER.

ternative frequencies search) on the next page).

unit.

Returning to the ordinary display

Turning the unit on

Canceling the main menu

Storing and recalling stations

1 Press SRC/OFF to turn the unit on.

1 Press BAND/

.

for each band

Turning the unit off

Returning to the ordinary display from the list

Using preset tuning buttons

1 Press and hold SRC/OFF until the unit turns

1 Press BAND/

.

off.

1 When you find a station that you want

to store in memory, press one of the preset

tuning buttons (1/

to 6/ ) and hold until

the preset number stops flashing.

4

En

Section

Operating this unit

Operating this unit

02

2 Press one of the preset tuning buttons

Searching for an RDS station by PTY information

OTHERS (others)

Local seek tuning lets you tune in to only those

(1/

to 6/ ) to select the desired station.

English

You can search for general types of broadcasting

radio stations with sufficiently strong signals for

EDUCATE (Education), DRAMA (Drama), CUL-

programs, such as those listed in the following

good reception.

Switching the display

TURE (Culture), SCIENCE (Science), VARIED (Var-

section. Refer to this page.

1 Press M.C. to select the desired setting.

ied), CHILDREN (Children’s), SOCIAL (Social

1 Press

(list).

FM: OFF—LV1—LV2—LV3—LV4

Selecting the desired text information

affairs), RELIGION (Religion), PHONE IN (Phone

2 Turn M.C. to select a program type.

MW/LW: OFF—LV1 —LV2

1 Press DISP to cycle between the following:

in), TOURING (Travel), LEISURE (Leisure), DOCU-

NEWS/INFO—POPULAR—CLASSICS—

The highest level setting allows reception of

! FREQUENCY (program service name or

MENT (Documentaries)

OTHERS

only the strongest stations, while lower levels

frequency)

3 Press M.C. to begin the search.

allow the reception of weaker stations.

! BRDCST INFO (program service name/PTY

The unit searches for a station broadcasting

Function settings

information)

TA (traffic announcement standby)

that type of program. When a station is found,

! CLOCK (source name and clock)

its program service name is displayed.

1 Press M.C. to display the main menu.

1 Press M.C. to turn traffic announcement

! To cancel the search, press M.C. again.

Notes

standby on or off.

! The program of some stations may differ

2 Turn M.C. to change the menu option

! If the program service name cannot be ac-

from that indicated by the transmitted PTY.

and press to select FUNCTION.

AF (alternative frequencies search)

quired in FREQUENCY, the broadcast fre-

! If no station is broadcasting the type of

quency is displayed instead. If the program

program you searched for, NOT FOUND is

3 Turn M.C. to select the function.

1 Press M.C. to turn AF on or off.

service name is detected, the program serv-

displayed for about two seconds and then

Once selected, the following functions can be

ice name will be displayed.

NEWS (news program interruption)

the tuner returns to the original station.

adjusted.

! BRDCST INFO text information will change

# If MW/LW band is selected, only BSM, LOCAL

1 Press M.C. to turn the NEWS function on or

automatically.

and SEEK are available.

off.

! Depending on the band, text information can

PTY list

be changed.

BSM (best stations memory)

SEEK (left/right key setting)

! Text information items that can be changed

NEWS/INFO (news and information)

BSM (best stations memory) automatically stores

You can assign a function to the left and right keys

depend on the area.

NEWS (News), AFFAIRS (Current affairs), INFO

the six strongest stations in the order of their sig-

of the unit.

(Information), SPORT (Sports), WEATHER (Weath-

nal strength.

Select MAN (manual tuning) to tune up or down

Using PTY functions

er), FINANCE (Finance)

1 Press M.C. to turn BSM on.

manually or select PCH (preset channel) to switch

You can tune in to a station using PTY (program

To cancel, press M.C. again.

between preset channels.

type) information.

POPULAR (popular)

1 Press M.C. to select MAN or PCH.

REGION (regional)

POP MUS (Popular music), ROCK MUS (Rock

music), EASY MUS (Easy listening), OTH MUS

When AF is used, the regional function limits the

(Other music), JAZZ (Jazz), COUNTRY (Country

selection of stations to those broadcasting region-

music), NAT MUS (National music), OLDIES

al programs.

(Oldies music), FOLK MUS (Folk music)

1 Press M.C. to turn the regional function on or

off.

CLASSICS (classics)

LOCAL (local seek tuning)

L. CLASS (Light classical), CLASSIC (Classical)

En

5

Section

02

Operating this unit

Operating this unit

USB storage device

Switching the display

Operations using special buttons

iPod

Basic operations

Selecting the desired text information

Selecting a repeat play range

Basic operations

1 Press DISP to cycle between the following:

1 Press 6/

to cycle between the following:

Playing songs on a USB storage device

MP3/WMA/WAV

! ALL – Repeat all files

Playing songs on an iPod

1 Open the USB port cover.

! TRACK INFO (track title/artist name/album

! ONE – Repeat the current file

1 Open the USB port cover.

2 Plug in the USB storage device using a USB

title)

! FLD – Repeat the current folder

2 Connect an iPod to the USB cable using an

cable.

! FILE INFO (file name/folder name)

iPod Dock Connector.

Playing tracks in random order

Playback is performed automatically.

! ELAPSED TIME (track number and play-

Playback is performed automatically.

1 Press 5/

to turn random play on or off.

back time)

Stopping playback of files on a USB storage de-

Tracks in a selected repeat range are played in

Selecting a song (chapter)

! CLOCK (source name and clock)

vice

random order.

1 Press c or d.

! SPEANA (spectrum analyzer)

1 You may disconnect the USB storage device at

! To change songs during random play, press d

Selecting an album

any time.

Notes

to switch to the next track. Pressing c restarts

1 Press 1/

or 2/ .

The unit stops playback.

playback of the current track from the begin-

! TRACK INFO and FILE INFO text information

ning of the song.

Fast forwarding or reversing

Selecting a folder

will change automatically.

1 Press and hold c or d.

1 Press 1/

or 2/ .

! Depending on the version of iTunes used to

Pausing playback

write MP3 files to media file types, incompati-

1 Press 4/PAUSE to pause or resume.

Selecting a track

Notes

ble text stored within an audio file may be

1 Press c or d.

Enhancing compressed audio and restoring rich

! The iPod cannot be turned on or off when the

displayed incorrectly.

sound (sound retriever)

control mode is set to CONTROL AUDIO.

Fast forwarding or reversing

! Text information items that can be changed

1 Press 3/S.Rtrv to cycle between:

! Disconnect headphones from the iPod be-

1 Press and hold c or d.

depend on the media.

1—2—OFF (off)

fore connecting it to this unit.

! When playing compressed audio, there is no

1 is effective for low compression rates, and 2

! The iPod will turn off about two minutes after

sound during fast forward or reverse.

Selecting and playing files/

is effective for high compression rates.

the ignition switch is set to OFF.

Returning to root folder

tracks from the name list

1 Press and hold BAND/

.

Switching the display

1 Press

to switch to the file/track name

Function settings

Switching between playback memory devices

list mode.

You can switch between playback memory devices

1 Press M.C. to display the main menu.

Selecting the desired text information

on USB storage devices with more than one Mass

2 Use M.C. to select the desired file name

1 Press DISP to cycle between the following:

Storage Device-compatible memory device.

(or folder name).

2 Turn M.C. to change the menu option

CONTROL AUDIO/CONTROL iPod

! TRACK INFO (track title/artist name/album

1 Press BAND/

.

and press to select FUNCTION.

title)

! You can switch between up to 32 different

Selecting a file or folder

Once selected, the function below can be ad-

! ELAPSED TIME (track number and play-

memory devices.

1 Turn M.C.

justed.

back time)

Note

Playing

! CLOCK (source name and clock)

S.RTRV (sound retriever)

1 When a file or track is selected, press M.C.

Disconnect USB storage devices from the unit

! SPEANA (spectrum analyzer)

Automatically enhances compressed audio and

when not in use.

CONTROL APP

Viewing a list of the files (or folders) in the se-

restores rich sound.

! CONTROL APP (APP MODE is displayed)

lected folder

1 Press M.C. to select the desired setting.

! CLOCK (source name and clock)

1 When a folder is selected, press M.C.

For details, refer to Enhancing compressed

! SPEANA (spectrum analyzer)

Playing a song in the selected folder

audio and restoring rich sound (sound retriever)

1 When a folder is selected, press and hold M.C.

on this page.

6

En

Section

Operating this unit

Operating this unit

02

Note

Operations using special buttons

2 Turn M.C. to change the mode; press to

% Press BAND/

to switch the control

TRACK INFO text information will change auto-

select.

mode.

English

matically.

Selecting a repeat play range

! ARTIST – Plays an album of the artist cur-

! CONTROL iPod – This unit’s iPod function

1 Press 6/

to cycle between the following:

rently being played.

can be operated from the connected iPod.

Browsing for a song

! ONE – Repeat the current song

! ALBUM – Plays a song from the album cur-

! CONTROL APP – This unit’s iPod function

! ALL – Repeat all songs in the selected list

rently being played.

can be operated from the connected iPod.

1 Press

to switch to the top menu of list

! When the control mode is set to CONTROL

! GENRE – Plays an album from the genre cur-

The unit will play back the sound from your

search.

iPod/CONTROL APP, the repeat play range will

rently being played.

iPod applications.

be same as what is set for the connected iPod.

The selected song/album will be played after the

! CONTROL AUDIO – This unit ’s iPod function

2 Use M.C. to select a category/song.

currently playing song.

can be operated from this unit.

Selecting a random play range (shuffle)

Only for MVH-150UI

Changing the name of the song or category

1 Press 5/

to cycle between the following:

Notes

You can also switch the control mode by press-

1 Turn M.C.

! SNG – Play back songs in the selected list

! The selected song/album may be canceled if

ing iPod.

Playlists—artists—albums—songs—podcasts

in random order.

you operate functions other than link search

—genres—composers—audiobooks

! ALB – Play back songs from a randomly se-

(e.g. fast forward and reverse).

Notes

lected album in order.

! Depending on the song selected to play, the

! Switching the control mode to

Playing

! OFF – Not play back in random order.

end of the currently playing song and the be-

CONTROL iPod/CONTROL APP pauses song

1 When a song is selected, press M.C.

ginning of the selected song/album may be

playback. Operate the iPod to resume play-

Playing all songs in random order (shuffle all)

Viewing a list of songs in the selected category

cut off.

back.

1 Press and hold 5/

to turn shuffle all on.

1 When a category is selected, press M.C.

! The following operations are still accessible

! To turn off shuffle all, select OFF in shuffle. For

Operating this unit’s iPod

from the unit even if the control mode is set

Playing a song in the selected category

details, refer to Selecting a random play range

(shuffle) on this page.

function from your iPod

to CONTROL iPod/CONTROL APP.

1 When a category is selected, press and hold

— Pausing

M.C.

This unit's iPod function can be operated from a

Pausing playback

— Fast forward/reverse

connected iPod.

Searching the list by alphabet

1 Press 4/PAUSE to pause or resume.

— Selecting a song (chapter)

If you switch to APP Mode, you can have the

1 When a list for the selected category is dis-

! The volume can only be adjusted from this

Enhancing compressed audio and restoring rich

sound from your iPod applications be output

played, press

to switch to alphabet search

unit.

sound (sound retriever)

from your car's speakers.

mode.

1 Press 3/S.Rtrv to cycle between:

CONTROL iPod is not compatible with the fol-

! You also can switch to alphabet search

Function settings

1—2—OFF (off)

lowing iPod models.

mode by turning M.C. twice.

1 is effective for low compression rates, and 2

! iPod nano 1st generation

1 Press M.C. to display the main menu.

2 Turn M.C. to select a letter.

is effective for high compression rates.

! iPod with video

3 Press M.C. to display the alphabetical list.

CONTROL APP is compatible with the following

2 Turn M.C. to change the menu option

! To cancel searching, press

/DIMMER.

iPod models.

and press to select FUNCTION.

Playing songs related to the

! iPod touch 4th generation

Notes

currently playing song

! iPod touch 3rd generation

3 Turn M.C. to select the function.

! You can play playlists created with the PC ap-

You can play songs from the following lists.

! iPod touch 2nd generation

Once selected, the following functions can be

plication (MusicSphere). The application will

• Album list of the currently playing artist

! iPod touch 1st generation

adjusted.

be available on our website.

• Song list of the currently playing album

! iPhone 4S

! AUDIO BOOK is not available when

! Playlists that you created with the PC appli-

• Album list of the currently playing genre

! iPhone 4

CONTROL iPod/CONTROL APP is selected in

cation (MusicSphere) are displayed in abbre-

! iPhone 3GS

the control mode. For details, refer to Operat-

viated form.

1 Press and hold

to switch to link play

! iPhone 3G

ing this unit’s iPod function from your iPod on

mode.

! iPhone

this page.

En

7

Section

02

Operating this unit

Operating this unit

Setting up for hands-free phoning

Notes

Using voice recognition

AUDIO BOOK (audiobook speed)

Before you can use the hands-free phoning

! If private mode is selected on the cellular

This feature can be used on an iPod equipped

1 Press M.C. to display the setting mode.

function you must set up the unit for use with

phone, hands-free phoning may not be avail-

with voice recognition that is connected by

2 Turn M.C. to select your favorite setting.

your cellular phone.

able.

Bluetooth with the source set to iPod or

! FASTER – Playback at a speed faster than

! The estimated call time appears in the dis-

BT AUDIO.

normal

play (this may differ slightly from the actual

1 Connection

! NORMAL – Playback at normal speed

call time).

% Press and hold M.C. to switch to voice

Operate the Bluetooth telephone connection

! SLOWER – Playback at a speed slower

recognition mode.

menu. Refer to Connection menu operation on

than normal

Storing and recalling phone numbers

The commands available with this unit are listed

this page.

below.

S.RTRV (sound retriever)

2 Function settings

1 If you find a phone number that you

! Song playback

Operate the Bluetooth telephone function

Automatically enhances compressed audio and

want to store to memory, press and hold

! Making a phone call

menu. Refer to Phone menu operation on the

restores rich sound.

down one of the preset tuning buttons (1/

next page.

Note

1 Press M.C. to select the desired setting.

to 6/ ) to store it to the relevant preset

tuning button.

For details on voice recognition features, check

For details, refer to Enhancing compressed

the manual for the iPod you are using.

audio and restoring rich sound (sound retriever)

The functions below can be used to store phone

Basic operations

on the previous page.

numbers to the memory. For details, refer to

Phone menu operation on the next page.

Connection menu operation

Making a phone call

! MISSED (missed call history)

Important

1 Refer to Phone menu operation on the next

! DIALLED (dialed call history)

Using Bluetooth wireless

page.

! Be sure to park your vehicle in a safe place

! RECEIVED (received call histor y)

and apply the parking brake when perform-

technology

Answering an incoming call

! PHONE BOOK (phone book)

ing this operation.

Only for MVH-350BT

1 When a call is received, press

.

! Connected devices may not operate properly

2 Press one of the preset tuning buttons

Ending a call

if more than one Bluetooth device is con-

(1/

to 6/ ) to recall the desired phone

Using Bluetooth telephone

1 Press

.

nected at a time (e.g. a phone and a separate

number.

audio player are connected simultaneously).

Important

Rejecting an incoming call

! Since this unit is on standby to connect with

1 When a call is received, press and hold

.

3 Press M.C. to make a call.

1 Press and hold

to display the con-

your cellular phone via Bluetooth wireless

technology, using it without the engine run-

Answering a call waiting

nection menu.

ning can drain the battery power.

1 When a call is received, press

.

Switching the display

# You cannot operate this step during a call.

! Operations may vary depending on the kind

Switching between callers on hold

Selecting the desired text information

2 Turn M.C. to select the function.

of cellular phone.

1 Press M.C.

You can change the display during a call.

Once selected, the following functions can be

! Advanced operations that require attention

Canceling call waiting

1 Press DISP to cycle between the following:

adjusted.

such as dialing numbers on the monitor,

! Call time

using the phone book, etc., are prohibited

1 Press and hold

.

! Name of other party

while driving. Park your vehicle in a safe

Adjusting the other party’s listening volume

! Number of other party

place when using these advanced opera-

1 Press c or d while talking on the phone.

tions.

! When private mode is on, this function is not

! Be sure to park your vehicle in a safe place

available.

and apply the parking brake when perform-

ing this operation.

Turning private mode on or off

1 Press BAND/

while talking on the phone.

8

En

Section

Operating this unit

Operating this unit

02

DEVICELIST (connecting or disconnecting a de-

To connect your device to this unit via Bluetooth

PHONE BOOK (phone book)

1 Press M.C. to start searching.

English

vice from the device list)

wireless technology, you need to enter a PIN code

! To cancel, press M.C. while searching.

on your device to verify the connection. The default

! The phone book in your cellular phone will be

! If this unit fails to find any available cellular

! When no device is selected in the device list,

code is 0000, but you can change it with this func-

transferred automatically when the phone is

phones, NOT FOUND is displayed.

this function is not available.

tion.

connected to this unit.

2 Turn M.C. to select a device from the device

1 Press M.C. to display the setting mode.

1 Press M.C. to display the setting mode.

! Depending on the cellular phone, the phone

list.

2 Turn M.C. to select the name of a device you

2 Turn M.C. to select a number.

book may not be transferred automatically. In

! If the desired device is not displayed, select

want to connect/disconnect.

3 Press M.C. to move the cursor to the next posi-

this case, operate your cellular phone to trans-

RE-SEARCH.

! Press and hold M.C. to switch the

tion.

fer the phone book. The visibility of this unit

! Press and hold M.C. to switch the

Bluetooth device address and device

4 After inputting PIN code, press and hold M.C.

should be on. Refer to VISIBLE (setting the visi-

Bluetooth device address and device

name.

! After inputting, pressing M.C. returns you

bility of this unit) on this page.

name.

3 Press M.C. to connect/disconnect the selected

to the PIN code input display, and you can

1 Press M.C. to display SEARCH (alphabetical

3 Press M.C. to connect the selected device.

device.

change the PIN code.

list).

! To complete the connection, check the de-

If the connection is established, * is indicated

2 Turn M.C. to select the first letter of the name

vice name (Pioneer BT Unit) and enter the

DEV. INFO (Bluetooth device address display)

on the device name.

you are looking for.

PIN code on your device.

! Press and hold M.C. to select the desired

DEL DEVICE (deleting a device from the device

! PIN code is set to 0000 as the default. You

1 Press M.C. to display the setting mode.

character type.

list)

can change this code.

2 Turn M.C. to display the device information.

TOP (alphabet)–ΟΛΑ (Greek alphabet)–-

! 6-digit number appears on the display of

Device name—Bluetooth device address

ВСЕ (Cyrillic alphabet)

! When no device is selected in the device list,

this unit. Once the connection is estab-

3 Press M.C. to display a registered name list.

this function is not available.

lished, this number disappears.

1 Press M.C. to display the setting mode.

Phone menu operation

4 Turn M.C. to select the name you are looking

! If you are unable to complete the connec-

for.

2 Turn M.C. to select the name of a device you

tion using this unit, use the device to con-

Important

5 Press M.C. to display the phone number list.

want to delete.

nect to the unit.

Be sure to park your vehicle in a safe place and

6 Turn M.C. to select a phone number you want

! Press and hold M.C. to switch the

! If three devices are already paired, DEVICE-

apply the parking brake when performing this

to call.

Bluetooth device address and device

FULL is displayed and it is not possible to

operation.

7 Press M.C. to make a call.

name.

perform this operation. In this case, delete

3 Press M.C. to display DELETE YES.

a paired device first.

1 Press

to display the phone menu.

PRESET 1-6 (preset phone numbers)

4 Press M.C. to delete a device information from

# When PW SAVE is on, you cannot display the

A. CONN (connecting to a Bluetooth device auto-

the device list.

phone menu. For details about the settings, refer to

1 Press M.C. to display the setting mode.

matically)

! While this function is in use, do not turn off

PW SAVE (power saving) on page 12.

2 Turn M.C. to select the desired preset number.

the engine.

3 Press M.C. to make a call.

1 Press M.C. to turn automatic connection on or

! You can also use the preset number but-

ADD DEVICE (connecting a new device)

off.

2 Turn M.C. to select the function.