Pioneer DEH-1900R: инструкция

English NederlandsItalianoFrançaisDeutschEspañol Русский

Operation Manual

Mode d’emploi

CD RDS Receiver

Récepteur RDS avec lecteur de CD

DEH-1920R

DEH-1900R

Contents

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate

your model properly. After you have finished reading the instructions, keep this man-

ual in a safe place for future reference.

Before You Start

– Adjusting equalizer curves 10

– Adjusting loudness 11

About this unit 3

– Adjusting source levels 11

Visit our website 3

Other Functions 11

Protecting your unit from theft 3

– Adjusting initial settings 11

– Removing the front panel 4

– Setting the FM tuning step 11

– Attaching the front panel 4

– Switching Auto PI Seek 11

Operating this unit

– Saving the battery consumption 12

What’s What 5

– Sound muting 12

– Head unit 5

Additional Information

– LCD display 6

Troubleshooting 13

Basic Operations 6

Error messages 13

– Turning the unit on and selecting a

Handling guideline of discs and player 13

source 6

Dual Discs 14

– Adjusting the volume 6

Specifications 15

– Turning the unit off 6

Tuner 6

– Listening to the radio 6

– Storing and recalling broadcast

frequencies 7

– Tuning in strong signals 7

– Storing the strongest broadcast

frequencies 7

RDS 7

– Introduction of RDS operation 7

– Switching the RDS display 7

– Receiving PTY alarm broadcasts 8

– Selecting alternative frequencies 8

– Receiving traffic announcements 8

– PTY list 9

Built-in Player 9

– Playing a disc 9

– Repeating play 9

– Playing tracks in random order 10

– Scanning tracks of a CD 10

– Pausing disc playback 10

Audio Adjustments 10

– Using balance adjustment 10

– Using the equalizer 10

2

En

Section

Before You Start

01

English

not remove any covers or attempt to gain ac-

cess to the inside of the product. Refer all ser-

vicing to qualified personnel.

! The Pioneer CarStereo-Pass is for use only in

Germany.

! Keep this manual handy as a reference for op-

If you want to dispose this product, do not mix

erating procedures and precautions.

it with general household waste. There is a se-

! Always keep the volume low enough so that

parate collection system for used electronic

you can hear sounds from outside the vehicle.

products in accordance with legislation that re-

! Protect this unit from moisture.

quires proper treatment, recovery and recy-

! If the battery is disconnected or discharged,

cling.

the preset memory will be erased and must be

reprogrammed.

! Should this product fail to operate properly,

Private households in the 25 member states of

contact your dealer or nearest authorized

the EU, in Switzerland and Norway may return

Pioneer Service Station.

their used electronic products free of charge to

designated collection facilities or to a retailer (if

you purchase a similar new one).

For countries not mentioned above, please con-

Visit our website

tact your local authorities for the correct method

Visit us at the following site:

of disposal.

By doing so you will ensure that your disposed

product undergoes the necessary treatment, re-

covery and recycling and thus prevent potential

negative effects on the environment and human

health.

! Register your product. We will keep the de-

tails of your purchase on file to help you

refer to this information in the event of an

About this unit

insurance claim such as loss or theft.

! We offer the latest information about

The tuner frequencies on this unit are allo-

Pioneer Corporation on our website.

cated for use in Western Europe, Asia, the

Middle East, Africa and Oceania. Use in other

areas may result in poor reception. The RDS

(radio data system) function operates only in

Protecting your unit from

areas with FM stations broadcasting RDS sig-

theft

nals.

The front panel can be detached to deter theft.

CAUTION

Important

! Do not allow this unit to come into contact

with liquids. Electrical shock could result.

! Handle gently when removing or attaching

Also, this unit damage, smoke, and overheat

the front panel.

could result from contact with liquids.

! Avoid subjecting the front panel to excessive

! “CLASS 1 LASER PRODUCT”

shocks.

This product contains a laser diode of higher

! Keep the front panel out of direct sunlight and

class than 1. To ensure continued safety, do

high temperatures.

3

En

Section

01

Before You Start

Removing the front panel

1 Press DETACH to release the front

panel.

2 Grab the front panel and remove.

3 Put the front panel into provided pro-

tective case for safe keeping.

Attaching the front panel

1 Slide the front panel to the left until it

clicks.

Front panel and the head unit are jointed on

the left side. Make sure that the front panel

has been jointed to the head unit.

2 Press the right side of the front panel

until it is firmly seated.

# If you can’t attach the front panel to the head

unit successfully, try again. Front panel may be

damaged if you attach the front panel forcedly.

4

En

8 DETACH button

What’s What

Press to remove the front panel from the

Head unit

head unit.

1 SOURCE button

9 EQ button

This unit is turned on by selecting a source.

Press to select various equalizer curves.

Press to cycle through all the available

Press and hold to turn loudness on or off.

sources.

Press and hold to recall the initial setting

a DISPLAY button

menu when the sources are off.

Press to select different displays.

2 VOLUME

b 1 to 6 buttons

Rotate it to increase or decrease the vo-

Press for preset tuning.

lume.

c TA button

3 CD loading slot

Press to turn TA function on or off. Press

Insert a disc to play.

and hold to turn AF function on or off.

4 EJECT button

d BAND button

Press to eject a CD from your built-in CD

Press to select among MW/LW and two FM

player.

bands and cancel the control mode of func-

tions.

5 AUDIO button

Press to select various sound quality con-

trols.

6 a/b/c/d buttons

Press to perform manual seek tuning, fast

forward, reverse and track search controls.

Also used for controlling functions.

7 FUNCTION button

Press to recall the function menu when op-

erating a source.

Section

Operating this unit

02

English

5

En

LCD display

1

3 5 6 7 9

Section

02

Operating this unit

8 Stereo (5) indicator

Shows when the selected frequency is

being broadcast in stereo.

2

9 LOC indicator

Shows when local seek tuning is on.

8

Basic Operations

Turning the unit on and

1 Main display section

selecting a source

Shows the various information such as

You can select a source you want to listen to.

band, play time, and other setting.

To switch to the built-in CD player, load a disc

! Tuner

in the unit (refer to page 9).

Band and frequency are displayed.

! RDS

% Press SOURCE to select a source.

Program service name, PTY information

Press SOURCE repeatedly to switch between

or frequency is displayed.

the following sources:

! Built-in CD Player

Tuner—Built-in CD player

Erapsed play time is displayed.

! Audio and initial setup

Notes

Function names and setup status are dis-

! When no disc has been set in the unit, the

played.

source will not switch to the built-in CD player.

2 Preset number/track number indicator

! When this unit’s blue/white lead is connected

Shows the track number or preset number.

to the vehicle’s auto-antenna relay control

! If a track number 100 or more is selected,

terminal, the vehicle’s antenna extends when

d on the left of the track number indica-

this unit’s source is turned on. To retract the

tor will light.

antenna, turn the source off.

3 AF indicator

Adjusting the volume

Shows when AF (alternative frequencies

search) function is on.

% Use VOLUME to adjust the sound level.

4 TP indicator

Shows when a TP station is tuned in.

Turning the unit off

5 TA indicator

% Press SOURCE and hold until the unit

Shows when TA (traffic announcement

turns off.

standby) function is on.

6 RPT indicator

Tuner

Shows when repeat play is turned on.

Listening to the radio

7 LOUD indicator

1 Press SOURCE to select the tuner.

Appears in the display when loudness is

turned on.

6

En

Section

Operating this unit

02

English

2 Press BAND to select a band.

The LOCAL 4 setting allows reception of only

Press BAND until the desired band (F1, F2 for

the strongest stations, while lower settings let

FM or MW/LW) is displayed.

you receive progressively weaker stations.

3 To perform manual tuning, briefly press

c or d.

Storing the strongest broadcast

frequencies

4 To perform seek tuning, press and hold

BSM (best stations memory) lets you automa-

c or d for about one second and release.

tically store the six strongest broadcast fre-

The tuner will scan the frequencies until a

quencies under preset tuning buttons 1 to 6.

broadcast strong enough for good reception is

Once stored you can tune in to those frequen-

found.

cies with the touch of button.

# You can cancel seek tuning by briefly pressing

! Storing broadcast frequencies with BSM

c or d.

may replace broadcast frequencies you

# If you press and hold c or d you can skip sta-

have saved using buttons 1 to 6.

tions. Seek tuning starts as soon as you release

the button.

1 Press FUNCTION to select BSM.

2 Press a to turn BSM on.

Storing and recalling broadcast

Six strongest broadcast frequencies will be

frequencies

stored in the order of their signal strength.

# To cancel the storage process, press b.

% When you find a frequency that you

want to store in memory, press one of pre-

set tuning buttons 1 to 6 and hold until the

preset number stops flashing.

RDS

Memorized radio station frequency can be re-

Introduction of RDS operation

called by pressing the preset tuning button.

# Up to 12 FM stations, 6 for each of the two FM

RDS (radio data system) contains inaudible in-

bands, and 6 MW/LW stations can be stored in

formations that helps searching of the radio

memory.

stations.

# Press a or b to recall radio station frequen-

! RDS service may not be provided by all sta-

cies.

tions.

! RDS functions such as AF and TA are only

active when your radio is tuned to an RDS

Tuning in strong signals

station.

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

Switching the RDS display

for good reception.

% Press DISPLAY.

1 Press FUNCTION to select LOCAL.

Press DISPLAY repeatedly to switch between

the following settings:

2 Press a or b to turn local seek tuning

Program service name—PTY information—

on or off.

Frequency

3 Press c or d to set the sensitivity.

PTY (program type ID code) information is

FM: LOCAL 1 —LOCAL 2—LOCAL 3—

listed on page 9.

LOCAL 4

# PTY information and the frequency appear on

MW/LW: LOCAL 1—LOCAL 2

the display for eight seconds.

7

En

Section

02

Operating this unit

Receiving PTY alarm broadcasts

Using Auto PI Seek for preset stations

When the emergency PTY code broadcasts,

When preset stations cannot be recalled, as

the unit receives it automatically (ALARM ap-

when travelling long distances, the unit can

pears). When the broadcasting ends, the sys-

be set to perform PI Seek during preset recall.

tem returns to the previous source.

! The default setting for Auto PI Seek is off.

! An emergency announcement can be can-

See Switching Auto PI Seek on page 11.

celed by pressing TA.

Limiting stations to regional

programming

Selecting alternative frequencies

When AF is used, the regional function limits

When the tuner can’t get good reception, the

the selection of stations broadcasting regional

unit automatically search for a different sta-

programs.

tion in a same network.

1 Press FUNCTION to select REG.

% Press and hold TA repeatedly to turn AF

(alternative frequency search) on or off.

2 Press a or b to turn the regional func-

tion on or off.

Notes

Notes

! You can also turn the AF function on or off in

the menu that appears with the pressing of

! Regional programming and regional networks

FUNCTION.

are organized differently depending on the

! Only RDS stations are tuned in during seek

country (i.e., they may change according to

tuning or BSM when AF is on.

the hour, state or broadcast area).

! When you recall a preset station, the tuner

! The preset number may disappear from the

may update the preset station with a new fre-

display if the tuner tunes in a regional station

quency from the station’s AF list. (This is only

which differs from the originally set station.

available when using presets on the F1 or F2

! The regional function can be turned on or off

bands.) No preset number appears on the dis-

independently for each FM band.

play if the RDS data for the station received

differs from that for the originally stored sta-

tion.

Receiving traffic announcements

! Sound may be temporarily interrupted by an-

TA (traffic announcement standby) lets you re-

other program during an AF frequency

ceive traffic announcements automatically, no

search.

matter what source you are listening to. TA

! AF can be turned on or off independently for

can be activated for both a TP station (a sta-

each FM band.

tion that broadcasts traffic information) or an

enhanced other network’s TP station (a station

Using PI Seek

carrying information which cross-references

TP stations).

If the tuner can’t find a suitable station, or re-

ception status becomes bad, the unit will auto-

1 Tune in a TP or enhanced other net-

matically search for a different station with a

work’s TP station.

same programming. During the search,

TP indicator will light.

PI SEEK is displayed and the output is muted.

8

En

Section

Operating this unit

02

English

2 Press TA to turn traffic announcement

NAT MUS National music

OLDIES Oldies, golden oldies

standby on.

FOLK MUS Folk music

# To turn traffic announcements standby off,

L.CLASS Light classical music

press TA again.

CLASSIC Classical music

EDUCATE Educational programs

3 Use VOLUME to adjust the TA volume

DRAMA Radio plays and serials

when a traffic announcement begins.

CULTURE National or regional culture

The newly set volume is stored in memory and

SCIENCE Nature, science and technology

recalled for subsequent traffic announce-

VARIED Light entertainment

CHILDREN Children’s

ments.

SOCIAL Social affairs

RELIGION Religious affairs or services

4 Press TA while a traffic announcement

PHONE IN Phone in

is being received to cancel the announce-

TOURING Travel programs; not for traffic an-

ment.

nouncements

The tuner returns to the original source but re-

LEISURE Hobbies and recreational activities

mains in the standby mode until TA is pressed

DOCUMENT Docu mentaries

again.

# You can also cancel the announcement by

pressing SOURCE, BAND, a, b, c or d while a

traffic announcement is being received.

Built-in Player

Notes

Playing a disc

! You can also turn the TA function on or off in

1 Insert a CD into the CD loading slot.

the menu that appears with the pressing of

Playback will automatically start.

FUNCTION.

# Be sure to turn up the label side of a disc.

! The system switches back to the original

# After a CD has been inserted, press SOURCE

source following traffic announcement recep-

to select the built-in CD player.

tion.

# You can eject a CD by pressing EJECT.

! Only TP and enhanced other network’s TP sta-

tions are tuned in during seek tuning or BSM

2 To perform fast forward or reverse,

when TA is on.

press and hold c or d.

3 To skip back or forward to another

PTY list

track, press c or d.

Specific Type of program

Notes

NEWS News

AFFAIRS Current affairs

! Read the precautions with discs and player on

INFO General information and advice

page 13.

SPORT Sports

! If an error message such as ERROR-11 is dis-

WEATHER Weather reports/meteorological infor-

mation

played, refer to Error messages on page 13.

FINANCE Stock market reports, commerce,

trading, etc.

POP MUS Popular music

Repeating play

ROCK MUS Contemporary modern music

Repeat play lets you hear the same track over

EASY MUS Easy listening music

again.

OTH MUS Non-categorized music

JAZZ Jazz

1 Press FUNCTION to select RPT.

COUNTRY Country music

9

En