Pioneer DEH-X3600UI: инструкция

CD RDS RECEIVER

AUTORADIO CD RDS

SINTOLETTORE CD RDS

English NederlandsDeutschEspañolItalianoFrançais Русский

REPRODUCTOR DE CD CON RECEPTOR RDS

CD RDS-EMPFÄNGER

CD RDS-ONTVANGER

CD RDS ПРИЕМНИК

Owner’s Manual

Mode d’emploi

DEH-X3600UI

Manuale d’istruzioni

Manual de instrucciones

DEH-2600UI

Bedienungsanleitung

Handleiding

Руководство пользователя

Section

01

Before you start

Before you start

Thank you for purchasing this PIONEER

About this unit

CAUTION

product

To ensure proper use, please read through this

The tuner frequencies on this unit are allocated

This product is a class 1 laser product classi-

manual before using this product. It is especially

for use in Western Europe, Asia, the Middle

fied under the Safety of laser products, IEC

important that you read and observe WARN-

East, Africa and Oceania. Use in other areas

60825-1:2007.

INGs and CAUTIONs in this manual. Please

may result in poor reception. The RDS (radio

keep the manual in a safe and accessible place for

data system) function only works in areas that

future reference.

broadcast RDS signals for FM stations.

WARNING

! Do not attempt to install or service this

If you experience problems

product by yourself. Installation or serv-

Should this unit fail to work properly, please con-

icing of this product by persons without

tact your dealer or nearest authorized PIONEER

training and experience in electronic

Service Station.

equipment and automotive accessories

If you want to dispose this product, do not

may be dangerous and could expose you

mix it with general household waste. There is

to the risk of electric shock, injury or

a separate collection system for used elec-

other hazards.

tronic products in accordance with legislation

! Do not attempt to operate the unit while driv-

that requires proper treatment, recovery and

ing. Make sure to pull off the road and park

recycling.

your vehicle in a safe location before at-

tempting to use the controls on the device.

Private households in the member states of the

EU, in Switzerland and Norway may return their

CAUTION

used electronic products free of charge to desig-

! Do not allow this unit to come into contact

nated collection facilities or to a retailer (if you

with liquids. Electrical shock could result.

purchase a similar new one).

Also, damage to this unit, smoke, and over-

For countries not mentioned above, please con-

heating could result from contact with

tact your local authorities for the correct method

liquids.

of disposal.

! The Pioneer CarStereo-Pass is for use only in

By doing so you will ensure that your disposed

Germany.

product undergoes the necessary treatment, re-

! Always keep the volume low enough to hear

covery and recycling and thus prevent potential

outside sounds.

negative effects on the environment and human

! Avoid exposure to moisture.

health.

2

En

Head unit

DEH-X3600UI

2 4

3

65

7

1

b c

DEH-2600UI

1

3

62 4 5

8

9 de

b

7

c

a

c 1/

to 6/

d AUX input jack (3.5 mm stereo jack)

e Detach button

CAUTION

Use an optional Pioneer USB cable (CD-U50E)

to connect the USB storage device as any device

connected directly to the unit will protrude out

from the unit, which could be dangerous.

Display indication

DEH-X3600UI

1

7 b9

1 SRC/OFF

2 h (eject)

3 MULTI-CONTROL (M.C.)

4

(list)

5 Disc loading slot

6 USB port

MIX (MIXTRAX)

DEH-X3600UI

7

iPod

DEH-2600UI

8 BAND/

(iPod control)

9

(back)/DIMMER (dimmer)

a c/d

b DISP

Section

Using this unit

Using this unit

02

4 Follow these steps to set the menu.

Main information section

To proceed to the next menu option, you need to

English

! Tuner: band and frequency

confirm your selection.

! RDS: program service name, PTY infor-

1

mation and other literal information

LANGUAGE (multi-language)

! CD player, USB storage device and iPod:

elapsed playback time and text informa-

This unit can display the text information from a

tion

compressed audio file even for information em-

bedded in English, Russian or Turkish.

! If the embedded language and the selected

2

Appears when a lower tier of folder or menu

language setting are not the same, text infor-

exists.

mation may not display properly.

3

(list)

! Some characters may not be displayed prop-

erly.

4 Sub information section

1 Turn M.C. to select the desired setting.

5 LOC (local seek tuning)

ENG (English)—РУС (Russian)—TUR (Turk-

ish)

6 TP (traffic program identification)

2

2 Press M.C. to confirm the selection.

7 TA (traffic announcements)

CLOCK SET (setting the clock)

8

(sound retriever)

1 Turn M.C. to adjust hour.

9

(random/shuffle)

2 Press M.C. to select minute.

3

54

a

(repeat)

3 Turn M.C. to adjust minute.

4 Press M.C. to confirm the selection.

(iPod control)

DEH-2600UI

b

This unit’s iPod function is operated from

FM STEP (FM tuning step)

your iPod.

Use FM STEP to set FM tuning step options (seek

b 6 5 9

43 7 a8

step settings).

1 Turn M.C. to select the FM tuning step.

Set up menu

100 (100 kHz)—50 (50 kHz)

2 Press M.C. to confirm the selection.

1 After installation of this unit, turn the

QUIT appears.

21

ignition switch to ON.

! The manual tuning step is fixed at 50 kHz.

SET UP appears.

! When AF and TA are turned off, the seek step

is fixed at 50 kHz even if set to 100.

2 Turn M.C. to switch to YES.

# If you do not use the unit for 30 seconds, the set

up menu will not be displayed.

5 To finish your settings, turn M.C. to select

# If you prefer not to set up at this time, turn M.C.

YES.

to switch to NO.

# If you prefer to change your setting again, turn

M.C. to switch to NO.

3 Press M.C. to select.

6 Press M.C. to select.

En

3

Section

02

Using this unit

Using this unit

Notes

Removing the front panel

Selecting a source

Radio

! You can set up the menu options from the

1 Press the detach button to release the front

1 Press SRC/OFF to cycle between:

system menu and initial menu. For details

Basic operations

panel.

RADIO—CD—USB/iPod—APP (application)—

about the settings, refer to System menu on

2 Push the front panel upward (M) and then pull

AUX

page 9 and Initial menu on page 11.

it toward (N) you.

! USB MTP displays while the MTP connection

Selecting a band

! You can cancel set up menu by pressing

is in use.

1 Press BAND/

until the desired band (FM1,

SRC/OFF.

! Only for DEH-2600UI

FM2,FM3 for FM or MW/LW) is displayed.

When there is an iPod connected and a source

Switching preset stations

other than iPod is selected, you can switch to

Basic operations

1 Press c or d.

iPod by pressing iPod.

! Select PCH (preset channel) under SEEK to

Important

Adjusting the volume

use this function.

! Handle the front panel with care when re-

3 Always store the detached front panel in a pro-

1 Turn M.C. to adjust the volume.

Manual tuning (step by step)

moving or attaching it.

tective case or bag.

1 Press c or d.

! Avoid subjecting the front panel to excessive

Re-attaching the front panel

Note

! Select MAN (manual tuning) under SEEK to

shock.

! Keep the front panel out of direct sunlight

1 Slide the front panel to the left.

When this unit’s blue/white lead is connected to

use this function.

and high temperatures.

the vehicle’s auto-antenna relay control termi-

Seeking

! To avoid damaging the device or vehicle inte-

nal, the vehicle’s antenna extends when this

1 Press and hold c or d, and then release.

rior, remove any cables and devices attached

unit’s source is turned on. To retract the anten-

You can cancel seek tuning by briefly pressing

to the front panel before detaching it.

na, turn the source off.

c or d.

While pressing and holding c or d, you can

skip stations. Seek tuning starts as soon as

Frequently used menu

2 Press the right side of the front panel until it is

you release c or d.

operations

firmly seated.

Notes

Forcing the front panel into place may result in

Returning to the previous display

! For details about SEEK, refer to SEEK (left/

damage to the front panel or head unit.

Returning to the previous list (the folder one level

right key setting) on page 5.

Turning the unit on

higher)

! This unit’s AF (alternative frequencies

1 Press SRC/OFF to turn the unit on.

1 Press

/DIMMER.

search) function can be turned on and off.

AF should be off for normal tuning operation

Turning the unit off

Returning to the ordinary display

(refer to AF (alternative frequencies search)

1 Press and hold SRC/OFF until the unit turns

Canceling the main menu

on page 5).

off.

1 Press BAND/

.

Returning to the ordinary display from the list

Storing and recalling stations

1 Press BAND/

.

for each band

Using preset tuning buttons

1 To store: Press and hold down one of the

preset tuning buttons (1/

to 6/ ) until

the number stops flashing.

2 To recall: Press one of the preset tuning

buttons (1/

to 6/ ).

4

En

Section

Using this unit

Using this unit

02

Switching the display

PTY list

When AF is used, the regional function limits the

CD/CD-R/CD-RW and USB

For more details about PTY list, visit the follow-

English

selection of stations to those broadcasting region-

storage devices

Selecting the desired text information

ing site:

al programs.

1 Press DISP to cycle between the following:

http://www.pioneer.eu/eur/products/25/121/tech/

1 Press M.C. to turn the regional function on or

MTP connection

! FREQUENCY (program service name or

CarAudio/PTY.html

off.

MTP-compatible Android devices (running

frequency)

Android OS 4.0 or higher) can be connected by

! BRDCST INFO (program service name/PTY

Function settings

LOCAL (local seek tuning)

MTP connection using the USB source. To con-

information)

Local seek tuning allows you to tune in to only

1 Press M.C. to display the main menu.

nect an Android device, use the cable that came

! CLOCK (source name and clock)

those radio stations with sufficiently strong sig-

with the device.

nals for good reception.

Notes

2 Turn M.C. to change the menu option

1 Press M.C. to select the desired setting.

Notes

! If the program service name cannot be ac-

and press to select FUNCTION.

FM: OFF—LV1—LV2—LV3—LV4

! This function is not compatible with MIX-

quired in FREQUENCY, the broadcast fre-

MW/LW: OFF—LV1—LV2

TRAX.

quency is displayed instead. If the program

3 Turn M.C. to select the function.

The highest level setting allows reception of

! This function is not compatible with WAV.

service name is detected, the program serv-

Once selected, the following functions can be

only the strongest stations, while lower levels

ice name will be displayed.

adjusted.

allow the reception of weaker stations.

Basic operations

! Depending on the band, text information can

# If MW/LW band is selected, only BSM, LOCAL

be changed.

and SEEK are available.

TA (traffic announcement standby)

Playing a CD/CD-R/CD-RW

! Text information items that can be changed

depend on the area.

FM SETTING (FM sound quality settings)

1 Press M.C. to turn traffic announcement

1 Insert the disc into the disc loading slot with

standby on or off.

the label side up.

The sound quality level can be set to match the

Using PTY functions

broadcast signal conditions of the FM band sig-

AF (alternative frequencies search)

Ejecting a CD/CD-R/CD-RW

1 Press h.

You can tune in to a station using PTY (program

nal.

1 Press M.C. to display the setting mode.

1 Press M.C. to turn AF on or off.

type) information.

Playing songs on a USB storage device

2 Turn M.C. to select the desired setting.

NEWS (news program interruption)

1 Open the USB port cover.

Searching for an RDS station by PTY information

! STANDARD – This is the standard setting.

2 Plug in the USB storage device using a USB

1 Press

(list).

! HI-FI – This is the setting to use to prioritize

1 Press M.C. to turn the NEWS function on or

cable.

2 Turn M.C. to select a program type.

the high quality of stereo sound.

off.

Stopping playback of files on a USB storage de-

NEWS/INFO—POPULAR—CLASSICS—

! STABLE – This is the setting to use to priori-

SEEK (left/right key setting)

vice

OTHERS

tize the low noise of monaural sound.

1 You may disconnect the USB storage device at

3 Press M.C. to begin the search.

BSM (best stations memory)

You can assign a function to the left and right keys

any time.

The unit searches for a station broadcasting

of the unit.

that type of program. When a station is found,

BSM (best stations memory) automatically stores

Select MAN (manual tuning) to tune up or down

Selecting a folder

its program service name is displayed.

the six strongest stations in the order of their sig-

manually or select PCH (preset channel) to switch

1 Press 1/

or 2/ .

! To cancel the search, press M.C. again.

nal strength.

between preset channels.

Selecting a track

! The program of some stations may differ

1 Press M.C. to turn BSM on.

1 Press M.C. to select MAN or PCH.

1 Press c or d.

from that indicated by the transmitted PTY.

To cancel, press M.C. again.

! If no station is broadcasting the type of

Fast forwarding or reversing

REGIONAL (regional)

program you searched for, NOT FOUND is

1 Press and hold c or d.

displayed for about two seconds and then

! When playing compressed audio, there is no

the tuner returns to the original station.

sound during fast forward or reverse.

Returning to root folder

1 Press and hold BAND/

.

En

5

Section

02

Using this unit

Using this unit

2 Turn M.C. to change the menu option

Switching between compressed audio and CD-DA

Switching the display

Viewing a list of the files (or folders) in the se-

and press to select FUNCTION.

1 Press BAND/

.

lected folder

Selecting the desired text information

Once selected, the function below can be ad-

1 When a folder is selected, press M.C.

Switching between playback memory devices

1 Press DISP to cycle between the following:

justed.

You can switch between playback memory devices

CD-DA

Playing a song in the selected folder

! S.RTRV is not available when MIXTRAX is

on USB storage devices with more than one Mass

! ELAPSED TIME (track number and play-

1 When a folder is selected, press and hold M.C.

turned on.

Storage Device-compatible memory device.

back time)

1 Press BAND/

.

! CLOCK (source name and clock)

S.RTRV (sound retriever)

! You can switch between up to 32 different

Operations using special buttons

! SPEANA (spectrum analyzer)

Automatically enhances compressed audio and

memory devices.

CD-TEXT

Selecting a repeat play range

restores rich sound.

! TRACK INFO (track title/track artist/disc

Note

1 Press 6/

to cycle between the following:

1 Press M.C. to select the desired setting.

title)

Disconnect USB storage devices from the unit

CD/CD-R/CD-RW

For details, refer to Enhancing compressed

! ELAPSED TIME (track number and play-

when not in use.

! ALL – Repeat all tracks

audio and restoring rich sound (sound retriever)

back time)

! ONE – Repeat the current track

on page 6.

! CLOCK (source name and clock)

Operations using the MIXTRAX

! FLD – Repeat the current folder

! SPEANA (spectrum analyzer)

button

USB storage device

MP3/WMA/WAV

! ALL – Repeat all files

iPod

! TRACK INFO (track title/artist name/album

! ONE – Repeat the current file

Turning MIXTRAX on or off

title)

! FLD – Repeat the current folder

Basic operations

Only for DEH-X3600UI

! FILE INFO (file name/folder name)

You can use this function when USB is selected as

! ELAPSED TIME (track number and play-

Playing tracks in random order

Playing songs on an iPod

the source.

back time)

1 Press 5/

to turn random play on or off.

1 Open the USB port cover.

You cannot use this function with USB MTP.

! CLOCK (source name and clock)

Tracks in a selected repeat range are played in

2 Connect an iPod to USB input.

1 Press MIX to turn MIXTRAX on or off.

! SPEANA (spectrum analyzer)

random order.

Playback is performed automatically.

! For more details about MIXTRAX, refer to

! To change songs during random play, press d

About MIXTRAX on page 10.

to switch to the next track. Pressing c restarts

Selecting a song (chapter)

! When MIXTRAX is in use, the sound retriever

Selecting and playing files/

playback of the current track from the begin-

1 Press c or d.

function is disabled.

tracks from the name list

ning of the song.

Selecting an album

1 Press

to switch to the file/track name

Pausing playback

1 Press 1/

or 2/ .

list mode.

1 Press 4/PAUSE to pause or resume.

Fast forwarding or reversing

Enhancing compressed audio and restoring rich

1 Press and hold c or d.

2 Use M.C. to select the desired file name

sound (sound retriever)

(or folder name).

1 Press 3/S.Rtrv to cycle between:

Notes

1—2—OFF (off)

! The iPod cannot be turned on or off when the

Selecting a file or folder

1 is effective for low compression rates, and 2

control mode is set to

1 Turn M.C.

is effective for high compression rates.

CONTROL AUDIO/CTRL AUDIO.

Playing

! Key operation is disabled when MIXTRAX is

! Disconnect headphones from the iPod be-

1 When a file or track is selected, press M.C.

on.

fore connecting it to this unit.

! The iPod will turn off about two minutes after

the ignition is switched off.

Function settings

1 Press M.C. to display the main menu.

6

En

Section

Using this unit

Using this unit

02

Operations using the MIXTRAX

! Depending on the song selected to play, the

Playing a song in the selected category

Playing all songs in random order (shuffle all)

button

end of the currently playing song and the be-

English

1 When a category is selected, press and hold

1 Press and hold 5/

to turn shuffle all on.

ginning of the selected song/album may be

M.C.

! To turn off shuffle all, select OFF in shuffle. For

cut off.

Turning MIXTRAX on or off

details, refer to Selecting a random play range

Searching the list by alphabet

Only for DEH-X3600UI

(shuffle) on page 7.

1 When a list for the selected category is dis-

Using this unit’s iPod function

1 Press MIX to turn MIXTRAX on or off.

played, press

to switch to alphabet search

Pausing playback

! For more details about MIXTRAX, refer to

from your iPod

mode.

1 Press 4/PAUSE to pause or resume.

About MIXTRAX on page 10.

This unit’s iPod function can be controlled by

! You also can switch to alphabet search

Enhancing compressed audio and restoring rich

using the connected iPod.

mode by turning M.C. twice.

sound (sound retriever)

CONTROL iPod/CTRL iPod is not compatible

Switching the display

2 Turn M.C. to select a letter.

1 Press 3/S.Rtrv to cycle between:

with the following iPod models.

3 Press M.C. to display the alphabetical list.

1—2—OFF (off)

! iPod nano 1st generation

Selecting the desired text information

! To cancel searching, press

/DIMMER.

1 is effective for low compression rates, and 2

! iPod with video

1 Press DISP to cycle between the following:

is effective for high compression rates.

! TRACK INFO (track title/artist name/album

Notes

% Press BAND/

to switch the control

title)

! You can play playlists created with the com-

mode.

! ELAPSED TIME (track number and play-

puter application (MusicSphere). The appli-

Playing songs related to the

! CONTROL iPod/CTRL iPod – This unit’siPod

back time)

cation will be available on our website.

currently playing song

function can be operated from the connected

! CLOCK (source name and clock)

! Playlists that you created with the computer

You can play songs from the following lists.

iPod.

! SPEANA (spectrum analyzer)

application (MusicSphere) are displayed in

• Album list of the currently playing artist

! CONTROL AUDIO/CTRL AUDIO – This unit’s

abbreviated form.

• Song list of the currently playing album

iPod function can be controlled by using this

• Album list of the currently playing genre

unit.

Browsing for a song

Operations using special buttons

Only for DEH-2600UI

1 Press

to switch to the top menu of list

1 Press and hold

to switch to link play

You can also switch the control mode by press-

search.

Selecting a repeat play range

mode.

ing iPod.

1 Press 6/

to cycle between the following:

Notes

2 Use M.C. to select a category/song.

! ONE – Repeat the current song

2 Turn M.C. to change the mode; press to

! ALL – Repeat all songs in the selected list

select.

! Switching the control mode to

Changing the name of the song or category

! When the control mode is set to CONTROL

! ARTIST – Plays an album by the artist cur-

CONTROL iPod/CTRL iPod pauses song

1 Turn M.C.

iPod/CTRL iPod, the repeat play range will be

rently playing.

playback. Use the iPod to resume playback.

same as what is set for the connected iPod.

! ALBUM – Plays a song from the album cur-

! The following operations are still accessible

Playlists—artists—albums—songs—podcasts

rently being played.

from the unit even if the control mode is set

—genres—composers—audiobooks

Selecting a random play range (shuffle)

! GENRE – Plays an album from the genre cur-

to CONTROL iPod/CTRL iPod.

Playing

1 Press 5/

to cycle between the following:

rently being played.

— Pausing

1 When a song is selected, press M.C.

! SNG – Play back songs in the selected list

The selected song/album will be played after the

— Fast forward/reverse

in random order.

— Selecting a song (chapter)

Viewing a list of songs in the selected category

currently playing song.

! ALB – Play back songs from a randomly se-

! The volume can only be adjusted from this

1 When a category is selected, press M.C.

lected album in order.

Notes

unit.

! OFF – Not play back in random order.

! The selected song/album may be canceled if

you use functions other than link search (e.g.

Function settings

fast forward and reverse).

1 Press M.C. to display the main menu.

En

7

Section

02

Using this unit

Using this unit

2 Turn M.C. to change the menu option

Starting procedure for iPhone users

Important

PAUSE (pause)

and press to select FUNCTION.

Use of third party apps may involve or require

1 Connect an iPhone to USB input.

1 Press M.C. to pause or resume.

3 Turn M.C. to select the function.

the provision of personally identifiable infor-

Once selected, the following functions can be

mation, whether through the creation of a

2 Switch the source to APP.

S.RTRV (sound retriever)

adjusted.

user account or otherwise, and for certain ap-

! AUDIO BOOK is not available when

plications, the provision of geolocation data.

3 Start up the application on the iPhone

1 Press M.C. to select the desired setting.

CONTROL iPod/CTRL iPod is selected in the

ALL THIRD PARTY APPS ARE THE SOLE RE-

and initiate playback.

1—2—OFF (off)

control mode. For details, refer to Using this

SPONSIBILITY OF THE PROVIDERS, INCLUD-

1 is effective for low compression rates, and 2

unit’s iPod function from your iPod on page 7.

ING WITHOUT LIMITATION COLLECTION AND

Basic operations

is effective for high compression rates.

SECURITY OF USER DATA AND PRIVACY

PRACTICES. BY ACCESSING THIRD PARTY

AUDIO BOOK (audiobook speed)

Selecting a track

APPS, YOU AGREE TO REVIEW THE TERMS

1 Press c or d.

Audio adjustments

1 Press M.C. to display the setting mode.

OF SERVICE AND PRIVACY POLICIES OF THE

PROVIDERS. IF YOU DO NOT AGREE WITH

Fast forwarding or reversing

2 Turn M.C. to select your favorite setting.

1 Press M.C. to display the main menu.

! FASTER – Playback at a speed faster than

THE TERMS OR POLICIES OF ANY PROVIDER

1 Press and hold c or d.

normal

OR DO NOT CONSENT TO THE USE OF GEO-

Pausing playback

2 Turn M.C. to change the menu option

! NORMAL – Playback at normal speed

LOCATION DATA WHERE APPLICABLE, DO

1 Press BAND/

to pause or resume.

and press to select AUDIO.

! SLOWER – Playback at a speed slower

NOT USE THAT THIRD PARTY APP.

than normal

3 Turn M.C. to select the audio function.

Switching the display

Once selected, the following audio functions

S.RTRV (sound retriever)

Information for compatibility of

can be adjusted.

connected devices

Selecting the desired text information

! FADER is not available when SUB.W/SUB.W

1 Press M.C. to select the desired setting.

1 Press DISP to cycle between the following:

is selected in SP-P/O MODE. For details, refer

For details, refer to Enhancing compressed

The following is the detailed information regard-

to SP-P/O MODE (rear output and preout set-

audio and restoring rich sound (sound retriever)

ing the terminals required to use the application

! TRACK INFO (track title/artist name/album

title)

ting) on page 11.

on page 7.

for iPhone on this unit.

! APP NAME (application name)

! SUB.W and SUB.W CTRL are not available

! ELAPSED TIME (playback time)

when REAR/REAR is selected in

For iPhone users

! CLOCK (source name and clock)

SP-P/O MODE. For details, refer to

! This function is compatible with iPhone and

Using connected device

! SPEANA (spectrum analyzer)

SP-P/O MODE (rear output and preout set-

iPod touch.

applications

ting) on page 11.

! The device has iOS 5.0 or higher.

! SUB.W CTRL is not available when SUB.W is

You can use this unit to perform streaming play-

Function settings

Notes

selected in OFF. For details, refer to SUB.W

back of and control tracks in iPhone applica-

! Please check our website for a list of sup-

1 Press M.C. to display the main menu.

(subwoofer on/off setting) on page 9.

tions or just for streaming playback.

ported iPhone applications for this unit.

! SLA is not available when FM is selected as

! Pioneer is not liable for any issues that may

2 Turn M.C. to change the menu option

the source.

arise from incorrect or flawed app-based

and press to select FUNCTION.

content.

FADER (fader adjustment)

! The content and functionality of the sup-

3 Turn M.C. to select the function.

ported applications are the responsibility of

Once selected, the following functions can be

1 Press M.C. to display the setting mode.

the App providers.

adjusted.

2 Turn M.C. to adjust the front/rear speaker bal-

ance.

BALANCE (balance adjustment)

8

En

Section

Using this unit

Using this unit

02

SUB.W CTRL (subwoofer adjustment)

SLA (source level adjustment)

LANGUAGE (multi-language)

1 Press M.C. to display the setting mode.

English

2 Turn M.C. to adjust the left/right speaker bal-

Only frequencies lower than those in the selected

This function prevents the volume from changing

This unit can display the text information from a

ance.

range are outputted from the subwoofer.

too dramatically when the source switches.

compressed audio file even for information em-

1 Press M.C. to display the setting mode.

! Settings are based on the FM volume level,

bedded in English, Russian or Turkish.

EQ SETTING (equalizer recall)

2 Press M.C. to cycle between the following:

which remains unchanged.

! If the embedded language and the selected

1 Press M.C. to display the setting mode.

Cut-off frequency—Output level—Slope level

! The MW/LW volume level can also be adjusted

language setting are not the same, text infor-

2 Turn M.C. to select the equalizer.

Rates that can be adjusted will flash.

with this function.

mation may not display properly.

POWERFUL—NATURAL—VOCAL—CUS-

3 Turn M.C. to select the desired setting.

! USB, iPod and APP are all set to the same set-

! Some characters may not be displayed prop-

TOM1—CUSTOM2—FLAT—SUPER BASS

Cut-off frequency: 50HZ—63HZ—80HZ—

ting automatically.

erly.

The equalizer band and equalizer level can be

100HZ—125HZ—160HZ—200HZ

1 Press M.C. to display the setting mode.

1 Press M.C. to select the desired setting.

customized when CUSTOM1 or CUSTOM2 is

Output level: –24 to +6

2 Turn M.C. to adjust the source volume.

ENG (English)—РУС (Russian)—TUR (Turk-

selected.

Slope level: –12— –24

Adjustment range: +4 to –4

ish)

If selecting CUSTOM1 or CUSTOM2, complete

BASS BOOST (bass boost)

CLOCK SET (setting the clock)

the procedures outlined below. If selecting

other options, press M.C. to return to the pre-

1 Press M.C. to display the setting mode.

System menu

1 Press M.C. to display the setting mode.

vious display.

2 Turn M.C. to select a desired level.

2 Press M.C. to select the segment of the clock

Important

! CUSTOM1 can be set separately for each

0 to +6 is displayed as the level is increased or

display you wish to set.

source. However, USB, iPod and APP are

PW SAVE (power saving) is canceled if the ve-

decreased.

Hour—Minute

all set to the same setting automatically.

hicle battery is disconnected and will need to be

3 Turn M.C. to adjust the clock.

HPF SETTING (high pass filter adjustment)

! CUSTOM2 is a shared setting used in com-

turned back on once the battery is reconnected.

mon for all sources.

When PW SAVE (power saving) is off, depend-

12H/24H (time notation)

Use this function when wanting to listen only to

3 Press M.C. to display the setting mode.

ing on connection methods, the unit may con-

high-frequency sounds. Only frequencies higher

1 Press M.C. to select the desired setting.

4 Press M.C. to cycle between the following:

tinue to draw power from the battery if your

than the high-pass filter (HPF) cutoff are output

12H (12-hour clock)—24H (24-hour clock)

Equalizer band—Equalizer level

vehicle’s ignition doesn’t have an ACC (acces-

from the speakers.

5 Turn M.C. to select the desired setting.

sory) position.

1 Press M.C. to display the setting mode.

INFO DISPLAY (sub information)

Equalizer band: 80HZ—250HZ—800HZ—

2 Press M.C. to cycle between the following:

2.5KHZ—8KHZ

1 Press M.C. to display the main menu.

The type of text information displayed in the sub

Cut-off frequency—Slope level

information section can be toggled.

Equalizer level: +6 to –6

3 Turn M.C. to select the desired setting.

2 Turn M.C. to change the menu option

1 Press M.C. to display the setting mode.

Cut-off frequency: OFF—50HZ—63HZ—80HZ

LOUDNESS (loudness)

and press to select SYSTEM.

2 Turn M.C. to select the desired setting.

—100HZ—125HZ—160HZ—200HZ

SPEANA—LEVEL METER—SOURCE—CLOCK

Loudness compensates for deficiencies in the low-

Slope level: –12— –24

3 Turn M.C. to select the system menu

—OFF

frequency and high-frequency ranges at low vol-

ume.

function.

! The signal bar indicator displays for SPEANA

or LEVEL METER when the source is set to

1 Press M.C. to select the desired setting.

Once selected, the following system menu func-

tions can be adjusted.

RADIO.

OFF (off)—LOW (low)—MID (mid)—HI (high)

! INFO DISPLAY and BRIGHTNESS are not

AUTO PI (auto PI seek)

SUB.W (subwoofer on/off setting)

available for DEH-2600UI.

This unit is equipped with a subwoofer output

! MUTE MODE is not available for DEH-

The unit can automatically search for a different

which can be turned on or off.

X3600UI.

station with the same programming, even during

preset recall.

1 Press M.C. to select the desired setting.

1 Press M.C. to turn Auto PI seek on or off.

NOR (normal phase)—REV (reverse phase)—

OFF (subwoofer off)

AUX (auxiliary input)

En

9