Pioneer DEH-1400UB: инструкция

CD RDS RECEIVER

AUTORADIO CD RDS

SINTOLETTORE CD RDS

English NederlandsDeutschEspañolItalianoFrançais Русский

REPRODUCTOR DE CD CON RECEPTOR RDS

CD RDS-EMPFÄNGER

CD RDS-ONTVANGER

CD RDS ПРИЕМНИК

Owner’s Manual

Mode d’emploi

DEH-1420UB

Manuale d’istruzioni

Manual de instrucciones

DEH-1410UB

Bedienungsanleitung

Handleiding

DEH-1400UB

Руководство пользователя

DEH-1400UBB

Section

01

Before you start

Before you start

Thank you for purchasing this PIONEER

About this unit

Note

product

Function setting operations are completed even

To ensure proper use, please read through this

The tuner frequencies on this unit are allocated

if the menu is cancelled before the operations

manual before using this product. It is especially

for use in Western Europe, Asia, the Middle

are confirmed.

important that you read and observe WARN-

East, Africa and Oceania. Use in other areas

INGs and CAUTIONs in this manual. Please

may result in poor reception. The RDS (radio

keep the manual in a safe and accessible place for

data system) function only operates in areas

About this manual

future reference.

with broadcasting RDS signals for FM stations.

In the following instructions, USB memories

and USB audio players are collectively referred

CAUTION

to as “USB storage device”.

This product is a class 1 laser product classi-

fied under the Safety of laser products, IEC

Demo mode

60825-1:2007, and contains a class 1M laser

module. To ensure continued safety, do not re-

Important

If you want to dispose this product, do not

move any covers or attempt to gain access to

! Failure to connect the red lead (ACC) of this

mix it with general household waste. There is

the inside of the product. Refer all servicing to

unit to a terminal coupled with ignition

a separate collection system for used elec-

qualified personnel.

switch on/off operations may lead to battery

tronic products in accordance with legislation

drain.

that requires proper treatment, recovery and

! Remember that if the feature demo contin-

recycling.

ues operating when the car engine is turned

off, it may drain battery power.

CAUTION—CLASS 1M INVISIBLE LASER

Private households in the member states of the

RADIATION WHEN OPEN, DO NOT VIEW

The demo starts automatically if you do not oper-

DIRECTLY WITH OPTICAL INSTRUMENTS.

EU, in Switzerland and Norway may return their

ate this unit within about 30 seconds since the

used electronic products free of charge to desig-

unit was last operated or if the ignition switch is

nated collection facilities or to a retailer (if you

set to ACC or ON while the unit is turned off. To

purchase a similar new one).

cancel the demo mode, you need to display the

For countries not mentioned above, please con-

initial settings. Select DEMO (demo display set-

CAUTION

tact your local authorities for the correct method

ting) and turn off the demo display. For details,

! Do not allow this unit to come into contact

of disposal.

refer to Initial settings on page 7.

with liquids. Electrical shock could result.

By doing so you will ensure that your disposed

Also, damage to this unit, smoke, and over-

product undergoes the necessary treatment, re-

heating could result from contact with

In case of trouble

covery and recycling and thus prevent potential

liquids.

negative effects on the environment and human

! The Pioneer CarStereo-Pass is for use only in

Should this unit fail to operate properly, please

health.

Germany.

contact your dealer or nearest authorized

! Always keep the volume low enough to hear

PIONEER Service Station.

outside sounds.

! Avoid exposure to moisture.

! If the battery is disconnected or discharged,

any preset memory will be erased.

2

En

Head unit

12 3 4 5 6

Display indication

1

873 5

Part Part

1 h (eject) 8

(back/display)

2

(list) 9 c/d

MULTI-CONTROL

3

a BAND

(M.C.)

4 SRC/OFF b 1 to 6

5 Disc loading slot c PTY

AUX input jack

6 USB port d

(3.5 mm stereo

jack)

7

e Detach button

CAUTION

! Use an optional Pioneer USB cable (CD-

U50E) to connect the USB audio player/USB

memory as any device connected directly to

the unit will protrude out from the unit and

may be dangerous.

! Do not use unauthorized products.

Section

Operating this unit

Operating this unit

02

1 After installation of this unit, turn the

TITLE (multi-language)

ignition switch to ON.

English

SET UP appears.

This unit can display the text information of a com-

pressed audio file even if they are embedded in a

2 Turn M.C. to switch to YES. Press M.C. to

Western European or Russian language.

select.

! If the embedded language and the selected

# If you do not operate for 30 seconds, the set up

language setting are not the same, text infor-

menu will not be displayed.

mation may not display properly.

# If you prefer not to set up at this time, turn M.C.

! Some characters may not be displayed prop-

to switch to NO. Press to select.

erly.

If you select NO, you cannot set up in the set up

1 Turn M.C. to select the desired setting.

Indicator State

menu.

EUR (European)—RUS (Russian)

2 Press M.C. to confirm the selection.

! Tuner: band and frequency

3 Perform the following procedures to set

QUIT appears.

! RDS: program service

the menu.

Main dis-

name, PTY information and

To proceed to the next menu option, you need to

1

play sec-

other literal information

4 To finish your settings, turn M.C. to select

confirm your selection.

tion

! Built-in CD player and

YES. Press to select.

USB: elapsed playback

# If you prefer to change your setting again, turn

CLOCK SET (setting the clock)

time and text information

M.C. to switch to NO. Press to select.

The list function is being oper-

1 Turn M.C. to adjust hour.

Notes

2

(list)

ated.

2 Press M.C. to select minute.

! You can set up the menu options in the initial

3 Turn M.C. to adjust minute.

settings. For details about the settings, refer

3 LOC Local seek tuning is on.

4 Press M.C. to confirm the selection.

to Initial settings on page 7.

4

(TA) TA function is on.

FM STEP (FM tuning step)

! You can cancel set up menu by pressing

SRC/OFF.

5

(TP) A TP station is tuned in.

Normally, the FM tuning step employed by seek

(re-

tuning is 50 kHz. When AF or TA is on, the tuning

6

Track or folder repeat is on.

peat)

step automatically changes to 100 kHz. It may be

Basic operations

preferable to set the tuning step to 50 kHz when

(ran-

Important

7

Random play is on.

AF is on.

dom)

! The tuning step remains at 50 kHz during man-

! Handle gently when removing or attaching

ual tuning.

the front panel.

The sound retriever function is

(sound re-

1 Turn M.C. to select the FM tuning step.

! Avoid subjecting the front panel to excessive

8

on.

50 (50 kHz)—100 (100 kHz)

shock.

triever)

2 Press M.C. to confirm the selection.

! Keep the front panel out of direct sunlight

and high temperatures.

DEMO (demo display setting)

! To avoid damaging the device or vehicle inte-

Set up menu

rior, remove any cables and devices attached

1 Turn M.C. to set the demo display to on or off.

When you turn the ignition switch to ON after in-

to the front panel before detaching it.

2 Press M.C. to confirm the selection.

stallation, set up menu appears on the display.

You can set up the menu options below.

En

3

Section

02

Operating this unit

Operating this unit

Removing the front panel to protect your unit from

Selecting a source

Tuner

Storing and recalling stations

theft

1 Press SRC/OFF to cycle between:

for each band

Basic operations

1 Press the detach button to release the front

TUNER (tuner)—CD (built-in CD player)—USB

Using preset tuning buttons

panel.

(USB)—AUX (AUX)

2 Push the front panel upward (M) and then pull

Selecting a band

1 When you find a station that you want

Adjusting the volume

it toward (N) you.

1 Press BAND until the desired band (F1, F2, F3

to store in memory, press one of the preset

1 Turn M.C. to adjust the volume.

for FM or MW/LW) is displayed.

tuning buttons (1 to 6) and hold until the

Recalling preset stations

preset number stops flashing.

1 Press c or d.

CAUTION

! If MAN (manual tuning) is selected in SEEK,

2 Press one of the preset tuning buttons (1

For safety reasons, park your vehicle when re-

you cannot recall preset stations. You need to

to 6) to select the desired station.

moving the front panel.

select PCH (preset channel) in SEEK. For de-

3 Always keep the detached front panel in a pro-

Note

tails about the settings, refer to SEEK (left/right

Switching the RDS display

tection device such as a protection case.

key setting) on the next page.

When this unit’s blue/white lead is connected to

% Press

.

Re-attaching the front panel

the vehicle’s auto-antenna relay control termi-

Manual tuning (step by step)

Program ser vice name—PTY information—En-

1 Slide the front panel to the left.

nal, the vehicle’s antenna extends when this

1 Press c or d.

tertainment—Frequency

Make sure to insert the tabs on the left side of

unit’s source is turned on. To retract the anten-

! If PCH (preset channel) is selected in SEEK,

# PTY information and the frequency appear on the

the head unit into the slots on the front panel.

na, turn the source off.

you cannot tune up or down manually. You

display for eight seconds.

need to select MAN (manual tuning) in SEEK.

# Depending on the band, text information can be

For details about the settings, refer to SEEK

changed.

Menu operations identical

(left/right key setting) on the next page.

for set up menu/function

Seeking

Using PTY functions

settings/audio adjustments/

1 Press and hold c or d, and then release.

You can tune in to a station using PTY (program

initial settings/lists

You can cancel seek tuning by briefly pressing

type) information.

2 Press the right side of the front panel until it is

c or d.

firmly seated.

Returning to the previous display

While pressing and holding c or d, you can

If you cannot attach the front panel to the

Returning to the previous list (the folder one level

skip stations. Seek tuning starts as soon as

head unit successfully, make sure that you are

higher)

you release c or d.

placing the front panel onto the head unit cor-

1 Press

.

Note

rectly. Forcing the front panel into place may

Returning to the ordinary display

This unit’s AF (alternative frequencies search)

result in damage to the front panel or head

Canceling the initial setting menu/set up menu

function can be turned on and off. AF should be

unit.

1 Press BAND.

off for normal tuning operation (refer to AF (al-

Turning the unit on

ternative frequencies search) on the next page).

Returning to the ordinary display from the list

1 Press SRC/OFF to turn the unit on.

1 Press BAND.

Turning the unit off

1 Press and hold SRC/OFF until the unit turns

off.

4

En

Section

Operating this unit

Operating this unit

02

Searching for an RDS station by PTY information

OTHERS

Local seek tuning lets you tune in to only those

SEEK (left/right key setting)

English

You can search for general types of broadcasting

radio stations with sufficiently strong signals for

EDUCATE (Education), DRAMA (Drama), CUL-

You can assign a function to the left and right keys

programs, such as those listed in the following

good reception.

TURE (Culture), SCIENCE (Science), VARIED (Var-

of the unit.

section. Refer to this page.

1 Press M.C. to select the desired setting.

ied), CHILDREN (Children’s), SOCIAL (Social

Select MAN (manual tuning) to tune up or down

1 Press PTY.

FM: OFF—LV1—LV2—LV3—LV4

affairs), RELIGION (Religion), PHONE IN (Phone

manually or select PCH (preset channel) to switch

2 Turn M.C. to select a program type.

MW/LW: OFF—LV1 —LV2

in), TOURING (Travel), LEISURE (Leisure), DOCU-

between preset channels.

NEWS/INFO—POPULAR—CLASSICS—

The highest level setting allows reception of

MENT (Documentaries)

1 Press M.C. to select MAN or PCH.

OTHERS

only the strongest stations, while lower levels

3 Press M.C. to begin the search.

allow the reception of weaker stations.

The unit searches for a station broadcasting

Function settings

PTY SEARCH (program type selection)

that type of program. When a station is found,

CD/CD-R/CD-RW and USB

its program service name is displayed.

1 Press M.C. to display the main menu.

You can tune in to a station using PTY (program

storage devices

PTY (program type ID code) information is

type) information.

listed in the following section. Refer to this

2 Turn M.C. to change the menu option

1 Press M.C. to display the setting mode.

Basic operations

page.

and press to select FUNCTION.

2 Turn M.C. to select the desired setting.

! To cancel the search, press M.C. again.

NEWS/INFO—POPULAR—CLASSICS—

Playing a CD/CD-R/CD-RW

! The program of some stations may differ

3 Turn M.C. to select the function.

OTHERS

1 Insert the disc into the disc loading slot with

from that indicated by the transmitted PTY.

After selecting, perform the following proce-

3 Press M.C. to begin the search.

the label side up.

! If no station is broadcasting the type of

dures to set the function.

The unit searches for a station broadcasting

program you searched for, NOT FOUND is

# If MW/LW band is selected, only BSM, LOCAL

Ejecting a CD/CD-R/CD-RW

that type of program. When a station is found,

displayed for about two seconds and then

and SEEK are available.

1 Press h.

its program service name is displayed.

the tuner returns to the original station.

For PTY (program type ID code) information,

Playing songs on a USB storage device

BSM (best stations memory)

refer to this page.

1 Open the USB port cover.

BSM (best stations memory) automatically stores

The program of some stations may differ from

2 Plug in the USB storage device using a USB

PTY list

that indicated by the transmitted PTY.

the six strongest stations in the order of their sig-

cable.

nal strength.

If no station is broadcasting the type of pro-

A song will be played automatically.

NEWS/INFO

1 Press M.C. to turn BSM on.

gram you searched for, NOT FOUND is dis-

Stopping playback of files on a USB storage de-

played for about two seconds and then the

NEWS (News), AFFAIRS (Current affairs), INFO

To cancel, press M.C. again.

vice

tuner returns to the original station.

(Information), SPORT (Sports), WEATHER (Weath-

REGION (regional)

1 You may disconnect the USB storage device at

er), FINANCE (Finance)

TA (traffic announcement standby)

any time.

When AF is used, the regional function limits the

The unit stops playback.

POPULAR

selection of stations to those broadcasting region-

1 Press M.C. to turn traffic announcement

POP MUS (Popular music), ROCK MUS (Rock

al programs.

standby on or off.

Selecting a folder

1 Press M.C. to turn the regional function on or

1 Press 1/

or 2/ .

music), EASY MUS (Easy listening), OTH MUS

AF (alternative frequencies search)

(Other music), JAZZ (Jazz), COUNTRY (Country

off.

Selecting a track

music), NAT MUS (National music), OLDIES

LOCAL (local seek tuning)

1 Press M.C. to turn AF on or off.

1 Press c or d.

(Oldies music), FOLK MUS (Folk music)

NEWS (news program interruption)

Fast forwarding or reversing

CLASSICS

1 Press and hold c or d.

1 Press M.C. to turn the NEWS function on or

! When playing compressed audio, there is no

L. CLASS (Light classical), CLASSIC (Classical)

off.

sound during fast forward or reverse.

Returning to root folder

1 Press and hold BAND.

En

5

Section

02

Operating this unit

Operating this unit

2 Turn M.C. to change the menu option

Switching between compressed audio and CD-DA

Viewing a list of the files (or folders) in the se-

FAD/BAL (fader/balance adjustment)

and press to select FUNCTION.

1 Press BAND.

lected folder

1 When a folder is selected, press M.C.

1 Press M.C. to display the setting mode.

Switching between playback memory devices

3 Turn M.C. to select the function.

2 Press M.C. to cycle between fader (front/rear)

You can switch between playback memory devices

Playing a song in the selected folder

After selecting, perform the following proce-

and balance (left/right).

on USB storage devices with more than one Mass

1 When a folder is selected, press and hold M.C.

dures to set the function.

3 Turn M.C. to adjust speaker balance.

Storage Device-compatible memory device.

! When the rear output and RCA output setting

1 Press BAND.

REPEAT (repeat play)

! You can switch between up to 32 different

Advanced operations using

are SW, you cannot adjust front/rear speaker

balance. Refer to REAR-SP (rear output setting)

memory devices.

special buttons

1 Press M.C. to select a repeat play range.

on the next page. Refer to PREOUT (preout set-

For details, refer to Selecting a repeat play range

Note

ting) on the next page.

Selecting a repeat play range

on this page.

Disconnect USB storage devices from the unit

1 Press 6/

to cycle between the following:

PRESET EQ (equalizer recall)

RANDOM (random play)

when not in use.

CD/CD-R/CD-RW

! ALL – Repeat all tracks

1 Press M.C. to display the setting mode.

1 Press M.C. to turn random play on or off.

Displaying text information

! ONE – Repeat the current track

2 Turn M.C. to select the equalizer.

! FLD – Repeat the current folder

PAUSE (pause)

DYNAMIC—VOCAL—NATURAL—CUSTOM

Selecting the desired text information

USB audio player/USB memory

—FLAT—POWERFUL

1 Press

.

! ALL – Repeat all files

1 Press M.C. to pause or resume.

3 Press M.C. to confirm the selection.

! Depending on the version of iTunes used to

! ONE – Repeat the current file

! You can also switch the equalizer by pressing

S.RTRV (sound retriever)

write MP3 files to a disc or media file types, in-

! FLD – Repeat the current folder

repeatedly.

compatible text stored within an audio file may

Automatically enhances compressed audio and

Playing tracks in random order

TONE CTRL (equalizer adjustment)

be displayed incorrectly.

restores rich sound.

1 Press 5/

to turn random play on or off.

! Text information items that can be changed

1 Press M.C. to select the desired setting.

Tracks in a selected repeat range are played in

! Adjusted equalizer curve settings are stored in

depend on the media.

For details, refer to Enhancing compressed

random order.

CUSTOM.

audio and restoring rich sound (sound retriever)

! To change songs during random play, press d

1 Press M.C. to display the setting mode.

on this page.

Selecting and playing files/

to switch to the next track. Pressing c restarts

2 Press M.C. to select BASS (bass)/MID (mid)/

playback of the current track from the begin-

TREBLE (treble).

tracks from the name list

ning of the song.

3 Turn M.C. to adjust the level.

Audio adjustments

Adjustment range: +6 to –6

1 Press

to switch to the file/track name

Pausing playback

list mode.

1 Press 4/PAUSE to pause or resume.

1 Press M.C. to display the main menu.

LOUD (loudness)

Loudness compensates for deficiencies in the low-

2 Use M.C. to select the desired file name

Enhancing compressed audio and restoring rich

2 Turn M.C. to change the menu option

sound (sound retriever)

frequency and high-frequency ranges at low vol-

(or folder name).

and press to select AUDIO.

1 Press 3/S.Rtrv to cycle between:

ume.

1—2—OFF (off)

1 Press M.C. to select the desired setting.

Changing the file or folder name

3 Turn M.C. to select the audio function.

OFF (off)—LOW(low)—HI (high)

1 Turn M.C.

1 is effective for low compression rates, and 2

After selecting, perform the following proce-

is effective for high compression rates.

dures to set the audio function.

SUB.W (subwoofer on/off setting)

Playing

1 When a file or track is selected, press M.C.

Function settings

1 Press M.C. to display the main menu.

6

En

Section

Operating this unit

Operating this unit

02

This unit is equipped with a subwoofer output

Initial settings

Normally, the FM tuning step employed by seek

The rear speaker leads output can be used for full-

English

which can be turned on or off.

Important

tuning is 50 kHz. When AF or TA is on, the tuning

range speaker or subwoofer connection.

1 Press M.C. to select the desired setting.

step automatically changes to 100 kHz. It may be

If you switch to SW, you can connect a rear speak-

PW SAVE (power saving) is cancelled if the ve-

NOR (normal phase)—REV (reverse phase)—

preferable to set the tuning step to 50 kHz when

er lead directly to a subwoofer without using an

hicle battery is disconnected and will need to be

OFF (subwoofer off)

AF is on.

auxiliary amp.

turned back on once the battery is reconnected.

! The tuning step remains at 50 kHz during man-

Initially, REAR-SP is set for rear full-range speaker

SUB.W CTRL (subwoofer adjustment)

When PW SAVE (power saving) is off, depend-

ual tuning.

connection (FUL).

ing on connection methods, the unit may con-

The cut-off frequency and output level can be ad-

1 Press M.C. to select the FM tuning step.

1 Press M.C. to select the desired setting.

tinue to draw power from the battery if your

justed when the subwoofer output is on.

50 (50 kHz)—100 (100 kHz)

FUL—SW

vehicle’s ignition doesn’t have an ACC (acces-

Only frequencies lower than those in the selected

! Even if you change this setting, there will

sory) position.

AUTO-PI (auto PI seek)

range are outputted from the subwoofer.

be no output if you select OFF in SUB.W

! When you select OFF in SUB.W, you cannot se-

The unit can automatically search for a different

(Refer to SUB.W (subwoofer on/off setting)

1 Press and hold SRC/OFF until the unit

lect this function. For details, refer to SUB.W

station with the same programming, even during

on the previous page).

turns off.

(subwoofer on/off setting) on the previous

preset recall.

! If you change this setting, subwoofer out-

page.

1 Press M.C. to turn Auto PI seek on or off.

put in the audio menu will return to the fac-

2 Press SRC/OFF and hold until function

1 Press M.C. to display the setting mode.

tory settings.

name appears in the display.

AUX (auxiliary input)

2 Press M.C. to cycle between the cut-off fre-

PREOUT (preout setting)

quency and output level of the subwoofer.

Activate this setting when using an auxiliary de-

3 Turn M.C. to select the initial setting.

Cut-off frequency (Cut-off frequency display

vice connected to this unit.

The RCA outputs can be used for rear speaker or

After selecting, perform the following proce-

flashes.)—Output level (Output level display

1 Press M.C. to turn AUX on or off.

subwoofer connection.

dures to set the initial setting.

flashes.)

If you switch to SW, you can connect a rear speak-

USB PNP (plug and play)

3 Turn M.C. to select the desired setting.

er lead directly to a subwoofer without using an

CLOCK SET (setting the clock)

Cut-off frequency: 50HZ—63HZ—80HZ—

This setting allows you to switch your source to

auxiliary amp.

100HZ—125HZ

USB automatically.

Initially, PREOUT is set for rear full-range speaker

1 Press M.C. to display the setting mode.

Output level: –24 to +6

1 Press M.C. to turn the plug and play function

connection (SW).

2 Press M.C. to select the segment of the clock

on or off.

1 Press M.C. to select the desired setting.

SLA (source level adjustment)

display you wish to set.

ON – When USB storage device is connected,

SW—REA

Hour—Minute

SLA (Source level adjustment) lets you adjust the

depending on the type of device, the source is

! Even if you change this setting, there will

3 Turn M.C. to adjust the clock.

volume level of each source to prevent radical

automatically switched to USB when you turn

be no output if you select OFF in SUB.W

changes in volume when switching between sour-

CLOCK (clock display)

on the engine. If you disconnect your USB stor-

(Refer to SUB.W (subwoofer on/off setting)

ces.

age device, this unit’s source is turned off.

on the previous page).

You can turn the clock display on or off.

! Settings are based on the FM volume level,

OFF – When USB storage device is connected,

! If you change this setting, subwoofer out-

The clock display disappears temporarily when

which remains unchanged.

the source is not switched to USB automati-

put in the audio menu will return to the fac-

you perform other operations, but the clock dis-

! The MW/LW volume level can also be adjusted

cally. Please change the source to USB man-

tory settings.

play appears again after 25 seconds.

with this function.

ually.

1 Press M.C. to turn the clock display on or off.

DEMO (demo display setting)

! When selecting FM as the source, you cannot

REAR-SP (rear output setting)

switch to SLA.

FM STEP (FM tuning step)

1 Press M.C. to turn the demo display on or off.

1 Press M.C. to display the setting mode.

! If PW SAVE is on, DEMO cannot be selected.

2 Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

SCROLL (scroll mode setting)

3 Press M.C. to confirm the selection.

En

7

Note

— Never wire the negative speaker cable directly

When ever scroll is set to ON, recorded text infor-

Connections

AUX cannot be selected unless the auxiliary set-

to ground.

mation scrolls continuously in the display. Set to

Important

ting is turned on. For more details, refer to AUX

— Never band together negative cables of multi-

OFF if you prefer the information to scroll just

(auxiliary input) on the previous page.

! When installing this unit in a vehicle without

ple speakers.

once.

an ACC (accessory) position on the ignition

! When this unit is on, control signals are sent

1 Press M.C. to turn the ever scroll on or off.

switch, failure to connect the red cable to the

through the blue/white cable. Connect this

TITLE (multi-language)

Sound muting

terminal that detects operation of the ignition

cable to the system remote control of an ex-

key may result in battery drain.

ternal power amp or the vehicle’s auto-anten-

This unit can display the text information of a com-

Only for DEH-1420UB, DEH-1400UB and DEH-

na relay control terminal (max. 300 mA

pressed audio file even if they are embedded in a

1400UBB.

O

Sound is muted automatically when:

F

N

12 V DC). If the vehicle is equipped with a

Western European or Russian language.

O

F

T

S

! If the embedded language and the selected

! A call is made or received using a cell phone

T

R

A

glass antenna, connect it to the antenna

booster power supply terminal.

language setting are not the same, text infor-

connected to this unit.

! Never connect the blue/white cable to the

mation may not display properly.

! Voice guidance is output from a connected

ACC position No ACC position

power terminal of an external power amp.

! Some characters may not be displayed prop-

Pioneer navigation unit.

! Use of this unit in conditions other than the

Also, never connect it to the power terminal

erly.

The sound is turned off, MUTE is displayed and

following could result in fire or malfunction.

of the auto antenna. Doing so may result in

1 Press M.C. to select the desired setting.

no audio adjustments, except volume control,

— Vehicles with a 12-volt battery and negative

battery drain or a malfunction.

EUR (European)—RUS (Russian)

are possible. Operation returns to normal when

grounding.

! The black cable is ground. Ground cables for

the phone connection or the voice guidance is

PW SAVE (power saving)

— Speakers with 50 W (output value) and 4 ohm

this unit and other equipment (especially,

ended.

to 8 ohm (impedance value).

high-current products such as power amps)

Switching this function on enables you to reduce

! To prevent a short-circuit, overheating or mal-

must be wired separately. If they are not, an

the consumption of battery power.

function, be sure to follow the directions

accidental detachment may result in a fire or

! Turning on the source is the only operation al-

below.

malfunction.

lowed when this function is on.

— Disconnect the negative terminal of the bat-

! This function is not available for DEH-1410UB.

tery before installation.

This unit

1 Press M.C. to turn the power save on or off.

— Secure the wiring with cable clamps or adhe-

DEH-1420UB, DEH-1400UB and DEH-1400UBB

sive tape. Wrap adhesive tape around wiring

that comes into contact with metal parts to

1

Switching the dimmer setting

protect the wiring.

— Place all cables away from moving parts,

You can adjust the brightness of illumination.

such as the shift lever and seat rails.

— Place all cables away from hot places, such

% Press and hold

.

as near the heater outlet.

— Do not connect the yellow cable to the battery

Using an AUX source

by passing it through the hole to the engine

compartment.

1 Insert the stereo mini plug into the AUX

— Cover any disconnected cable connectors

input jack.

with insulating tape.

— Do not shorten any cables.

2 Press SRC/OFF to select AUX as the

— Never cut the insulation of the power cable of

source.

this unit in order to share the power with

other devices. The current capacity of the

cable is limited.

— Use a fuse of the rating prescribed.

2

DEH-1410UB

1

Section

02

Operating this unit

Installation

03

2

1 Power cord input

2 Rear output or subwoofer output

8

En

3 Antenna input

4 Fuse (10 A)

5 Wired remote input

Hard-wired remote control adaptor can be

connected (sold separately).

Power cord

3

4

1

2

5

6

3

4

7

5

6

8

a

9

b

e

Section

Installation

Installation

03

8 Black (chassis ground)

! When using a subwoofer of 70 W (2 Ω), be

! Optimum performance is obtained when the

9 Blue/white

sure to connect the subwoofer to the violet

unit is installed at an angle of less than 60°.

English

The pin position of the ISO connector will dif-

and violet/black leads of this unit. Do not

fer depending on the type of vehicle. Connect

connect anything to the green and green/

60°

9 and b when Pin 5 is an antenna control

black leads.

type. In another type of vehicle, never con-

nect 9 and b.

Power amp (sold separately)

a Blue/white

Perform these connections when using the op-

Connect to system control terminal of the

DIN front/rear mount

tional amplifier.

power amp (max. 300 mA 12 V DC).

This unit can be properly installed using either

b Blue/white

1

3

front-mount or rear-mount installation.

Connect to auto-antenna relay control termi-

2

Use commercially available parts when instal-

nal (max. 300 mA 12 V DC).





4

ling.

c Yellow/black

55





Only for DEH-1420UB, DEH-1400UB and

DIN Front-mount

DEH-1400UBB.

1 System remote control

If you use an equipment with Mute function,

Connect to Blue/white cable.

1 Insert the mounting sleeve into the dash-

wire this lead to the Audio Mute lead on that

2 Power amp (sold separately)

board.

equipment. If not, keep the Audio Mute lead

3 Connect with RCA cables (sold separately)

For installation in shallow spaces, use the sup-

free of any connections.

4 To Rear output or subwoofer output

plied mounting sleeve. If there is enough space,

d Speaker leads

5 Rear speaker or subwoofer

use the mounting sleeve that came with the ve-

White: Front left +

hicle.

White/black: Front left *

c

Gray: Front right +

Installation

2 Secure the mounting sleeve by using a

Gray/black: Front right *

screwdriver to bend the metal tabs (90°) into

Important

Green: Rear left + or subwoofer +

place.

Green/black: Rear left * or subwoofer *

! Check all connections and systems before

1 To power cord input

Violet: Rear right + or subwoofer +

final installation.

1

2 Depending on the kind of vehicle, the func-

Violet/black: Rear right * or subwoofer *

! Do not use unauthorized parts as this may

tion of 3 and 5 may be different. In this

e ISO connector

cause malfunctions.

case, be sure to connect 4 to 5 and 6 to

In some vehicles, the ISO connector may be

! Consult your dealer if installation requires

3.

divided into two. In this case, be sure to con-

drilling of holes or other modifications to the

3 Yellow

nect to both connectors.

vehicle.

2

Back-up (or accessory)

! Do not install this unit where:

Notes

4 Yellow

— it may interfere with operation of the vehicle.