Pioneer DEH-140UB: инструкция

CD RDS RECEIVER

AUTORADIO CD RDS

SINTOLETTORE CD RDS

English NederlandsDeutschEspañolItalianoFrançais Русский

REPRODUCTOR DE CD CON RECEPTOR RDS

CD RDS-EMPFÄNGER

CD RDS-ONTVANGER

CD RDS ПРИЕМНИК

Owner’s Manual

Mode d’emploi

DEH-142UB

Manuale d’istruzioni

Manual de instrucciones

DEH-141UB

Bedienungsanleitung

Handleiding

DEH-140UB

Руководство пользователя

DEH-140UBB

Section

01

Before you start

Before you start

Thank you for purchasing this PIONEER

Note

About this unit

product

Function setting operations are completed even

The tuner frequencies on this unit are allocated

To ensure proper use, please read through this

if the menu is cancelled before the operations

for use in Western Europe, Asia, the Middle

manual before using this product. It is especially

are confirmed.

East, Africa and Oceania. Use in other areas

important that you read and observe WARN-

may result in poor reception. The RDS (radio

INGs and CAUTIONs in this manual. Please

data system) function only operates in areas

keep the manual in a safe and accessible place for

About this manual

with broadcasting RDS signals for FM stations.

future reference.

In the following instructions, USB memories

and USB audio players are collectively referred

to as “USB storage device”.

CAUTION

This product is a class 1 laser product classi-

fied under the Safety of laser products, IEC

Demo mode

60825-1:2007, and contains a class 1M laser

module. To ensure continued safety, do not re-

Important

move any covers or attempt to gain access to

! Failure to connect the red lead (ACC) of this

If you want to dispose this product, do not

the inside of the product. Refer all servicing to

unit to a terminal coupled with ignition

mix it with general household waste. There is

qualified personnel.

switch on/off operations may lead to battery

a separate collection system for used elec-

drain.

tronic products in accordance with legislation

! Remember that if the feature demo contin-

that requires proper treatment, recovery and

ues operating when the car engine is turned

recycling.

off, it may drain battery power.

CAUTION—CLASS 1M INVISIBLE LASER

Private households in the member states of the

RADIATION WHEN OPEN, DO NOT VIEW

The demo starts automatically if you do not oper-

DIRECTLY WITH OPTICAL INSTRUMENTS.

EU, in Switzerland and Norway may return their

ate this unit within about 30 seconds since the

used electronic products free of charge to desig-

unit was last operated or if the ignition switch is

nated collection facilities or to a retailer (if you

set to ACC or ON while the unit is turned off. To

purchase a similar new one).

cancel the demo mode, you need to display the

For countries not mentioned above, please con-

initial settings. Select DEMO (demo display set-

CAUTION

tact your local authorities for the correct method

ting) and turn off the demo display. For details,

! Do not allow this unit to come into contact

of disposal.

refer to Initial settings on page 6.

with liquids. Electrical shock could result.

By doing so you will ensure that your disposed

Also, damage to this unit, smoke, and over-

product undergoes the necessary treatment, re-

heating could result from contact with

In case of trouble

covery and recycling and thus prevent potential

liquids.

negative effects on the environment and human

! The Pioneer CarStereo-Pass is for use only in

Should this unit fail to operate properly, please

health.

Germany.

contact your dealer or nearest authorized

! Always keep the volume low enough to hear

PIONEER Service Station.

outside sounds.

! Avoid exposure to moisture.

! If the battery is disconnected or discharged,

any preset memory will be erased.

2

En

Head unit

12 3 4 5 6

Display indication

1

873 5

Part Part

1 h (eject) 8

(back)

2

(list) 9 c/d

MULTI-CONTROL

3

a BAND

(M.C.)

4 SRC/OFF b 1/

to 6/

5 Disc loading slot c (clock)

AUX input jack

6 USB port d

(3.5 mm stereo

jack)

7

(EQ) e Detach button

CAUTION

! Use an optional Pioneer USB cable (CD-

U50E) to connect the USB audio player/USB

memory as any device connected directly to

the unit will protrude out from the unit and

may be dangerous.

! Do not use unauthorized products.

Section

Operating this unit

Operating this unit

02

1 After installation of this unit, turn the

TITLE (multi-language)

ignition switch to ON.

English

SET UP appears.

This unit can display the text information of a com-

pressed audio file even if they are embedded in a

2 Turn M.C. to switch to YES.

Western European or Russian language.

# If you do not operate for 30 seconds, the set up

! If the embedded language and the selected

menu will not be displayed.

language setting are not the same, text infor-

# If you prefer not to set up at this time, turn M.C.

mation may not display properly.

to switch to NO.

! Some characters may not be displayed prop-

If you select NO, you cannot set up in the set up

erly.

menu.

1 Turn M.C. to select the desired setting.

Indicator State

EUR (European)—RUS (Russian)

3 Press M.C. to select.

2 Press M.C. to confirm the selection.

! Tuner: band and fre-

QUIT appears.

quency

4 Perform the following procedures to set

! RDS: program service

the menu.

name, PTY information

5 To finish your settings, turn M.C. to select

Main dis-

To proceed to the next menu option, you need to

1

and other literal informa-

YES.

play section

confirm your selection.

tion

# If you prefer to change your setting again, turn

! Built-in CD player and

M.C. to switch to NO.

CLOCK SET (setting the clock)

USB: elapsed playback

time and text information

6 Press M.C. to select.

1 Turn M.C. to adjust hour.

The list function is being oper-

2 Press M.C. to select minute.

Notes

2

(list)

ated.

3 Turn M.C. to adjust minute.

! You can set up the menu options in the initial

4 Press M.C. to confirm the selection.

settings. For details about the settings, refer

3 LOC Local seek tuning is on.

FM STEP (FM tuning step)

to Initial settings on page 6.

4

(TA) TA function is on.

! You can cancel set up menu by pressing

Normally, the FM tuning step employed by seek

SRC/OFF.

5

(TP) A TP station is tuned in.

tuning is 50 kHz. When AF or TA is on, the tuning

6

(repeat) Track or folder repeat is on.

step automatically changes to 100 kHz. It may be

preferable to set the tuning step to 50 kHz when

Basic operations

(ran-

7

Random play is on.

AF is on.

dom)

Important

! The tuning step remains at 50 kHz during man-

! Handle gently when removing or attaching

ual tuning.

The sound retriever function

the front panel.

8

(sound re-

1 Turn M.C. to select the FM tuning step.

is on.

! Avoid subjecting the front panel to excessive

triever)

50 (50 kHz)—100 (100 kHz)

shock.

2 Press M.C. to confirm the selection.

! Keep the front panel out of direct sunlight

DEMO (demo display setting)

and high temperatures.

Set up menu

! To avoid damaging the device or vehicle inte-

1 Turn M.C. to set the demo display to on or off.

When you turn the ignition switch to ON after in-

rior, remove any cables and devices attached

2 Press M.C. to confirm the selection.

to the front panel before detaching it.

stallation, set up menu appears on the display.

You can set up the menu options below.

En

3

Section

02

Operating this unit

Operating this unit

Storing and recalling stations

Removing the front panel to protect your unit from

Selecting a source

Tuner

theft

1 Press SRC/OFF to cycle between:

for each band

Basic operations

1 Press the detach button to release the front

TUNER (tuner)—CD (built-in CD player)—USB

Using preset tuning buttons

panel.

(USB)—AUX (AUX)

Selecting a band

2 Push the front panel upward (M) and then pull

1 When you find a station that you want

Adjusting the volume

1 Press BAND until the desired band (F1, F2 for

it toward (N) you.

to store in memory, press one of the preset

1 Turn M.C. to adjust the volume.

FM or MW/LW) is displayed.

tuning buttons (1 to 6) and hold until the

Recalling preset stations

preset number stops flashing.

1 Press c or d.

CAUTION

! If MAN (manual tuning) is selected in SEEK,

2 Press one of the preset tuning buttons (1

For safety reasons, park your vehicle when re-

you cannot recall preset stations. You need to

to 6) to select the desired station.

moving the front panel.

select PCH (preset channel) in SEEK. For de-

3 Always keep the detached front panel in a pro-

Switching the RDS display

Note

tails about the settings, refer to SEEK (left/right

tection device such as a protection case.

key setting) on the next page.

When this unit’s blue/white lead is connected to

% Press .

Re-attaching the front panel

the vehicle’s auto-antenna relay control termi-

Manual tuning (step by step)

Program ser vice name—PTY information—Fre-

1 Slide the front panel to the left.

nal, the vehicle’s antenna extends when this

1 Press c or d.

quency

Make sure to insert the tabs on the left side of

unit’s source is turned on. To retract the anten-

! If PCH (preset channel) is selected in SEEK,

# PTY information and the frequency appear on the

the head unit into the slots on the front panel.

na, turn the source off.

you cannot tune up or down manually. You

display for eight seconds.

need to select MAN (manual tuning) in SEEK.

# Depending on the band, text information can be

For details about the settings, refer to SEEK

changed.

Menu operations identical

(left/right key setting) on the next page.

for set up menu/function

Seeking

Using PTY functions

settings/audio adjustments/

1 Press and hold c or d, and then release.

You can tune in to a station using PTY (program

initial settings/lists

You can cancel seek tuning by briefly pressing

type) information.

c or d.

2 Press the right side of the front panel until it is

While pressing and holding c or d, you can

firmly seated.

Returning to the previous display

PTY list

skip stations. Seek tuning starts as soon as

If you cannot attach the front panel to the

Returning to the previous list (the folder one level

you release c or d.

head unit successfully, make sure that you are

higher)

NEWS/INFO

placing the front panel onto the head unit cor-

1 Press

.

Note

NEWS (News), AFFAIRS (Current affairs), INFO

rectly. Forcing the front panel into place may

Returning to the ordinary display

This unit’s AF (alternative frequencies search)

(Information), SPORT (Sports), WEATHER (Weath-

result in damage to the front panel or head

Canceling the initial setting menu/set up menu

function can be turned on and off. AF should be

er), FINANCE (Finance)

unit.

1 Press BAND.

off for normal tuning operation (refer to AF (al-

POPULAR

Turning the unit on

ternative frequencies search) on the next page).

Returning to the ordinary display from the list

1 Press SRC/OFF to turn the unit on.

POP MUS (Popular music), ROCK MUS (Rock

1 Press BAND.

music), EASY MUS (Easy listening), OTH MUS

Turning the unit off

(Other music), JAZZ (Jazz), COUNTRY (Country

1 Press and hold SRC/OFF until the unit turns

music), NAT MUS (National music), OLDIES

off.

(Oldies music), FOLK MUS (Folk music)

CLASSICS

L. CLASS (Light classical), CLASSIC (Classical)

4

En

Section

Operating this unit

Operating this unit

02

2 Use M.C. to select the desired file name

OTHERS

Local seek tuning lets you tune in to only those

Stopping playback of files on a USB storage de-

(or folder name).

English

radio stations with sufficiently strong signals for

vice

EDUCATE (Education), DRAMA (Drama), CUL-

good reception.

1 You may disconnect the USB storage device at

TURE (Culture), SCIENCE (Science), VARIED (Var-

Changing the file or folder name

1 Press M.C. to select the desired setting.

any time.

ied), CHILDREN (Children’s), SOCIAL (Social

1 Turn M.C.

FM: OFF—LV1—LV2—LV3—LV4

The unit stops playback.

affairs), RELIGION (Religion), PHONE IN (Phone

MW/LW: OFF—LV1 —LV2

Playing

in), TOURING (Travel), LEISURE (Leisure), DOCU-

Selecting a folder

The highest level setting allows reception of

1 When a file or track is selected, press M.C.

MENT (Documentaries)

1 Press 1/

or 2/ .

only the strongest stations, while lower levels

Viewing a list of the files (or folders) in the se-

allow the reception of weaker stations.

Selecting a track

lected folder

Function settings

1 Press c or d.

TA (traffic announcement standby)

1 When a folder is selected, press M.C.

Fast forwarding or reversing

1 Press M.C. to display the main menu.

Playing a song in the selected folder

1 Press M.C. to turn traffic announcement

1 Press and hold c or d.

1 When a folder is selected, press and hold M.C.

standby on or off.

! When playing compressed audio, there is no

2 Turn M.C. to change the menu option

sound during fast forward or reverse.

and press to select FUNCTION.

AF (alternative frequencies search)

Returning to root folder

Advanced operations using

3 Turn M.C. to select the function.

1 Press M.C. to turn AF on or off.

1 Press and hold BAND.

special buttons

After selecting, perform the following proce-

SEEK (left/right key setting)

dures to set the function.

Switching between compressed audio and CD-DA

Selecting a repeat play range

# If MW/LW band is selected, only BSM, LOCAL

1 Press BAND.

You can assign a function to the left and right keys

1 Press 6/

to cycle between the following:

and SEEK are available.

of the unit.

Note

CD/CD-R/CD-RW

Select MAN (manual tuning) to tune up or down

Disconnect USB storage devices from the unit

! ALL – Repeat all tracks

BSM (best stations memory)

manually or select PCH (preset channel) to switch

when not in use.

! ONE – Repeat the current track

between preset channels.

BSM (best stations memory) automatically stores

! FLD – Repeat the current folder

1 Press M.C. to select MAN or PCH.

the six strongest stations in the order of their sig-

USB audio player/USB memory

Displaying text information

nal strength.

! ALL – Repeat all files

1 Press M.C. to turn BSM on.

! ONE – Repeat the current file

Selecting the desired text information

To cancel, press M.C. again.

CD/CD-R/CD-RW and USB

! FLD – Repeat the current folder

1 Press

.

storage devices

REGION (regional)

! Depending on the version of iTunes used to

Playing tracks in random order

write MP3 files to a disc or media file types, in-

1 Press 5/

to turn random play on or off.

When AF is used, the regional function limits the

Basic operations

compatible text stored within an audio file may

Tracks in a selected repeat range are played in

selection of stations to those broadcasting region-

be displayed incorrectly.

random order.

al programs.

Playing a CD/CD-R/CD-RW

! Text information items that can be changed

1 Press M.C. to turn the regional function on or

Pausing playback

1 Insert the disc into the disc loading slot with

depend on the media.

off.

1 Press 4/PAUSE to pause or resume.

the label side up.

LOCAL (local seek tuning)

Enhancing compressed audio and restoring rich

Ejecting a CD/CD-R/CD-RW

Selecting and playing files/

sound (sound retriever)

1 Press h.

tracks from the name list

1 Press 3/S.Rtrv to cycle between:

Playing songs on a USB storage device

OFF (off)—1—2

1 Press to switch to the file/track name

1 Open the USB port cover.

1 is effective for low compression rates, and 2

list mode.

2 Plug in the USB storage device using a USB

is effective for high compression rates.

cable.

A song will be played automatically.

En

5

Section

02

Operating this unit

Operating this unit

Function settings

FAD/BAL (fader/balance adjustment)

SLA (source level adjustment)

CLOCK SET (setting the clock)

1 Press M.C. to display the main menu.

SLA (Source level adjustment) lets you adjust the

1 Press M.C. to display the setting mode.

1 Press M.C. to display the setting mode.

volume level of each source to prevent radical

2 Press M.C. to cycle between fader (front/rear)

2 Press M.C. to select the segment of the clock

2 Turn M.C. to change the menu option

changes in volume when switching between sour-

and balance (left/right).

display you wish to set.

and press to select FUNCTION.

ces.

3 Turn M.C. to adjust speaker balance.

Hour—Minute

! Settings are based on the FM volume level,

3 Turn M.C. to select the function.

3 Turn M.C. to adjust the clock.

PRESET EQ (equalizer recall)

which remains unchanged.

After selecting, perform the following proce-

! The MW/LW volume level can also be adjusted

FM STEP (FM tuning step)

dures to set the function.

1 Press M.C. to display the setting mode.

with this function.

Normally, the FM tuning step employed by seek

2 Turn M.C. to select the equalizer.

! When selecting FM as the source, you cannot

REPEAT (repeat play)

tuning is 50 kHz. When AF or TA is on, the tuning

DYNAMIC—VOCAL—NATURAL—CUSTOM

switch to SLA.

step automatically changes to 100 kHz. It may be

—FLAT—POWERFUL

1 Press M.C. to display the setting mode.

1 Press M.C. to select a repeat play range.

preferable to set the tuning step to 50 kHz when

3 Press M.C. to confirm the selection.

2 Turn M.C. to adjust the source volume.

For details, refer to Selecting a repeat play range

AF is on.

! You can also switch the equalizer by pressing

Adjustment range: +4 to –4

on the previous page.

! The tuning step remains at 50 kHz during man-

(EQ) repeatedly.

3 Press M.C. to confirm the selection.

ual tuning.

RANDOM (random play)

TONE CTRL (equalizer adjustment)

1 Press M.C. to select the FM tuning step.

50 (50 kHz)—100 (100 kHz)

1 Press M.C. to turn random play on or off.

! Adjusted equalizer curve settings are stored in

Initial settings

CUSTOM.

AUTO-PI (auto PI seek)

PAUSE (pause)

Important

1 Press M.C. to display the setting mode.

The unit can automatically search for a different

PW SAVE (power saving) is cancelled if the ve-

2 Press M.C. to select BASS (bass)/MID (mid)/

1 Press M.C. to pause or resume.

station with the same programming, even during

hicle battery is disconnected and will need to be

TREBLE (treble).

preset recall.

S.RTRV (sound retriever)

turned back on once the battery is reconnected.

3 Turn M.C. to adjust the level.

1 Press M.C. to turn Auto PI seek on or off.

When PW SAVE (power saving) is off, depend-

Adjustment range: +6 to –6

Automatically enhances compressed audio and

ing on connection methods, the unit may con-

AUX (auxiliary input)

restores rich sound.

LOUD (loudness)

tinue to draw power from the battery if your

1 Press M.C. to select the desired setting.

vehicle’s ignition doesn’t have an ACC (acces-

Activate this setting when using an auxiliary de-

Loudness compensates for deficiencies in the low-

For details, refer to Enhancing compressed

sory) position.

vice connected to this unit.

frequency and high-frequency ranges at low vol-

audio and restoring rich sound (sound retriever)

1 Press M.C. to turn AUX on or off.

on the previous page.

ume.

1 Press and hold SRC/OFF until the unit

1 Press M.C. to select the desired setting.

USB PNP (plug and play)

turns off.

OFF (off)—LOW(low)—HI (high)

This setting allows you to switch your source to

Audio adjustments

2 Display the function name.

USB automatically.

# (DEH-142UB, DEH-140UB and DEH-140UBB)

1 Press M.C. to turn the plug and play function

1 Press M.C. to display the main menu.

Press SRC/OFF and hold until function name ap-

on or off.

pears in the display.

ON – When USB storage device is connected,

2 Turn M.C. to change the menu option

# (DEH-141UB)

depending on the type of device, the source is

and press to select AUDIO.

Press M.C. and hold until function name appears in

automatically switched to USB when you turn

the display.

on the engine. If you disconnect your USB stor-

3 Turn M.C. to select the audio function.

age device, this unit’s source is turned off.

After selecting, perform the following proce-

3 Turn M.C. to select the initial setting.

OFF – When USB storage device is connected,

dures to set the audio function.

After selecting, perform the following proce-

the source is not switched to USB automati-

dures to set the initial setting.

cally. Please change the source to USB man-

ually.

6

En

Note

— Never wire the negative speaker cable directly

DEMO (demo display setting)

Connections

AUX cannot be selected unless the auxiliary set-

to ground.

Important

ting is turned on. For more details, refer to AUX

— Never band together negative cables of multi-

1 Press M.C. to turn the demo display on or off.

(auxiliary input) on the previous page.

! When installing this unit in a vehicle without

ple speakers.

! If PW SAVE is on, DEMO cannot be selected.

an ACC (accessory) position on the ignition

! When this unit is on, control signals are sent

SCROLL (scroll mode setting)

switch, failure to connect the red cable to the

through the blue/white cable. Connect this

Turning the clock display on

terminal that detects operation of the ignition

cable to the system remote control of an ex-

When ever scroll is set to ON, recorded text infor-

or off

key may result in battery drain.

ternal power amp or the vehicle’s auto-anten-

mation scrolls continuously in the display. Set to

na relay control terminal (max. 300 mA

OFF if you prefer the information to scroll just

% Press to turn the clock display on or

O

once.

F

F

N

12 V DC). If the vehicle is equipped with a

off.

O

T

S

glass antenna, connect it to the antenna

1 Press M.C. to turn the ever scroll on or off.

T

R

A

# The clock display disappears temporarily when

booster power supply terminal.

you perform other operations, but the clock display

TITLE (multi-language)

! Never connect the blue/white cable to the

appears again after 25 seconds.

ACC position No ACC position

power terminal of an external power amp.

This unit can display the text information of a com-

! Use of this unit in conditions other than the

Also, never connect it to the power terminal

pressed audio file even if they are embedded in a

Sound muting

following could result in fire or malfunction.

of the auto antenna. Doing so may result in

Western European or Russian language.

— Vehicles with a 12-volt battery and negative

battery drain or a malfunction.

! If the embedded language and the selected

Only for DEH-142UB, DEH-140UB and DEH-

grounding.

! The black cable is ground. Ground cables for

language setting are not the same, text infor-

140UBB.

— Speakers with 50 W (output value) and 4 ohm

this unit and other equipment (especially,

mation may not display properly.

Sound is muted automatically when:

to 8 ohm (impedance value).

high-current products such as power amps)

! Some characters may not be displayed prop-

! A call is made or received using a cell phone

! To prevent a short-circuit, overheating or mal-

must be wired separately. If they are not, an

erly.

connected to this unit.

function, be sure to follow the directions

1 Press M.C. to select the desired setting.

accidental detachment may result in a fire or

! Voice guidance is output from a connected

below.

EUR (European)—RUS (Russian)

malfunction.

Pioneer navigation unit.

— Disconnect the negative terminal of the bat-

The sound is turned off, MUTE is displayed and

PW SAVE (power saving)

tery before installation.

This unit

no audio adjustments, except volume control,

— Secure the wiring with cable clamps or adhe-

Only for DEH-142UB, DEH-140UB and DEH-

are possible. Operation returns to normal when

DEH-142UB, DEH-140UB and DEH-140UBB

sive tape. Wrap adhesive tape around wiring

140UBB.

the phone connection or the voice guidance is

that comes into contact with metal parts to

Switching this function on enables you to reduce

1

ended.

protect the wiring.

the consumption of battery power.

— Place all cables away from moving parts,

! Turning on the source is the only operation al-

lowed when this function is on.

such as the shift lever and seat rails.

1 Press M.C. to turn the power save on or off.

— Place all cables away from hot places, such

as near the heater outlet.

— Do not connect the yellow cable to the battery

by passing it through the hole to the engine

Using an AUX source

compartment.

1 Insert the stereo mini plug into the AUX

— Cover any disconnected cable connectors

input jack.

with insulating tape.

— Do not shorten any cables.

2 Press SRC/OFF to select AUX as the

— Never cut the insulation of the power cable of

source.

this unit in order to share the power with

other devices. The current capacity of the

cable is limited.

— Use a fuse of the rating prescribed.

2

DEH-141UB

1

Section

Operating this unit

Installation

02

03

English

2

1 Power cord input

2 Rear output

En

7

3 Antenna input

4 Fuse (10 A)

5 Wired remote input

Hard-wired remote control adaptor can be

connected (sold separately).

Power cord

3

4

1

2

5

6

3

4

7

5

6

8

a

9

b

e

8 Black (chassis ground)

1 System remote control

! When installing, to ensure proper heat dis-

9 Blue/white

Connect to Blue/white cable.

persal when using this unit, make sure you

The pin position of the ISO connector will dif-

2 Power amp (sold separately)

leave ample space behind the rear panel and

fer depending on the type of vehicle. Connect

3 Connect with RCA cables (sold separately)

wrap any loose cables so they are not block-

9 and b when Pin 5 is an antenna control

4 To Rear output

ing the vents.

type. In another type of vehicle, never con-

5 Rear speaker

nect 9 and b.

a Blue/white

Connect to system control terminal of the

Installation

power amp (max. 300 mA 12 V DC).

Important

b Blue/white

! Check all connections and systems before

Connect to auto-antenna relay control termi-

final installation.

nal (max. 300 mA 12 V DC).

! Do not use unauthorized parts as this may

c Yellow/black

cause malfunctions.

Only for DEH-142UB, DEH-140UB and DEH-

! Consult your dealer if installation requires

140UBB.

drilling of holes or other modifications to the

If you use an equipment with Mute function,

vehicle.

wire this lead to the Audio Mute lead on that

! Do not install this unit where:

equipment. If not, keep the Audio Mute lead

— it may interfere with operation of the vehicle.

free of any connections.

— it may cause injury to a passenger as a result

d Speaker leads

of a sudden stop.

White: Front left +

! The semiconductor laser will be damaged if

White/black: Front left *

it overheats. Install this unit away from hot

c

Gray: Front right +

places such as near the heater outlet.

Gray/black: Front right *

! Optimum performance is obtained when the

Green: Rear left +

unit is installed at an angle of less than 60°.

Green/black: Rear left *

1 To power cord input

Violet: Rear right +

2 Depending on the kind of vehicle, the func-

Violet/black: Rear right *

60°

tion of 3 and 5 may be different. In this

e ISO connector

case, be sure to connect 4 to 5 and 6 to

In some vehicles, the ISO connector may be

3.

divided into two. In this case, be sure to con-

3 Yellow

nect to both connectors.

Back-up (or accessory)

4 Yellow

Power amp (sold separately)

Connect to the constant 12 V supply termi-

Perform these connections when using the op-

nal.

tional amplifier.

5 Red

Accessory (or back-up)

1

3

6 Red

2

Connect to terminal controlled by ignition

4





switch (12 V DC).

55





7 Connect leads of the same color to each

other.

Section

03

Installation

Installation

Leave ample

5 cm

space

5 cm

DIN front/rear mount

This unit can be properly installed using either

front-mount or rear-mount installation.

Use commercially available parts when instal-

ling.

DIN Front-mount

1 Insert the mounting sleeve into the dash-

board.

For installation in shallow spaces, use the sup-

plied mounting sleeve. If there is enough space,

use the mounting sleeve that came with the ve-

hicle.

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°) into

place.

1

2

1 Dashboard

8

En

Section

Installation

Additional information

03

2 Mounting sleeve

2 Mounting bracket

Troubleshooting

Symptom Cause Action

3 Dashboard or console

English

3 Install the unit as illustrated.

The unit is

You are using a

Move electrical

Symptom Cause Action

Removing the unit

malfunction-

device, such as

devices that may

1

ing.

a cellular

be causing the in-

The display il-

Demo mode is

Turn off the demo

1 Remove the trim ring.

2

There is inter-

phone, that

terference away

lumination

on.

display setting.

ference.

transmits elec-

from the unit.

turns on and

tric waves near

off at random.

3

4

the unit.

The clock is

Demo mode is

Turn off the demo

not displayed

on.

display setting.

when the

5

Error messages

clock display

is turned on.

When you contact your dealer or your nearest

1 Trim ring

Pioneer Service Center, be sure to note the error

The display

You did not per-

Perform operation

1 Nut

2 Notched tab

message.

automatically

form any opera-

again.

2 Firewall or metal support

! Releasing the front panel allows easier ac-

returns to the

tion within

3 Metal strap

cess to the trim ring.

ordinary dis-

about 30 sec-

Built-in CD Player

4 Screw

! When reattaching the trim ring, point the

play.

onds.

5 Screw (M4 × 8)

side with the notched tab down.

Message Cause Action

# Make sure that the unit is installed securely in

The repeat

Depending on

Select the repeat

place. An unstable installation may cause skipping

2 Insert the supplied extraction keys into

play range

the repeat play

play range again.

ERROR-07,

The disc is dirty. Clean the disc.

or other malfunctions.

both sides of the unit until they click into

changes un-

range, the se-

11, 12, 17, 30

The disc is

Replace the disc.

place.

expectedly.

lected range

scratched.

may change

DIN Rear-mount

ERROR-07,

There is an elec-

Turn the ignition

3 Pull the unit out of the dashboard.

when another

10, 11, 12,

trical or me-

switch OFF and

1 Determine the appropriate position

folder or track is

15, 17, 30,

chanical error.

back ON, or

where the holes on the bracket and the side

being selected

A0

switch to a differ-

of the unit match.

or during fast

ent source, then

forwarding/re-

back to the CD

versing.

player.

A subfolder is

Subfolders can-

Select another re-

ERROR-15 The inserted

Replace the disc.

not played

not be played

peat play range.

disc is blank.

back.

when FLD (fold-

Removing and re-attaching the front

er repeat) is se-

ERROR-23 Unsupported

Replace the disc.

2 Tighten two screws on each side.

panel

lected.

CD format.

You can remove the front panel to protect your

NO XXXX ap-

There is no em-

Switch the display

FRMT READ Sometimes

Wait until the

unit from theft.

3

pears when a

bedded text in-

or play another

there is a delay

message disap-

1

Press the detach button and push the front

display is

formation.

track/file.

between the

pears and you

panel upward and pull it toward you.

changed (NO

start of playback

hear sound.

For details, refer to Removing the front panel to

TITLE, for ex-

and when you

2

protect your unit from theft and Re-attaching the

ample).

start to hear any

front panel on page 4.

sound.

1 Tapping screw (5 mm × 8 mm)

En

9