Karcher Balayeuse KM 90-60 R Lpg Adv: Shutdown

     

- 

7

Note:

 To achieve an optimum cleaning re-

sult, the driving speed should be adjusted 

to take specific situations into account.

Note:

 During operation, the waste contain-

er should be emptied at regular intervals.

Note:

 When cleaning surfaces, only lower 

the roller brush.

Note:

 Also lower side brush when cleaning 

along edges.



Set programme switch to step 2. Roller 

brush is lowered.

Note:

 Roller brush starts operating auto-

matically.

Note:

 To sweep up larger items up to a 

height of 50 mm, e.g. cigarette packs, the 

bulk waste flap must be raised briefly.

Raising bulk waste flap:



Press the pedal for the bulk waste flap 

forwards and keep pressed down.



To lower it, take foot off pedal.

Note:

 An optimum cleaning result can 

only be achieved if the bulk waste flap 

has been lowered completely.



Set programme switch to step 3. Side 

brushes and roller brush are lowered.

Note:

 Roller brush and side brush start 

operating automatically.



Close wet/dry flap



Open wet/dry flap.

Note:

 You can thus prevent the filter 

system from getting blocked.



Open wet/dry flap.

Note:

 This protects the filter from mois-

ture.

The appliance is equipped with an auto-

matic filter cleaning system.

The cleaning takes place automatically ap-

prox. every 15 seconds. In the process a 

short blow-off sound can be heard.



Check the installed dust filter for con-

tamination every once in a while. Re-

place a heavily contaminated or 

defective filter.

Note:

 After parking the appliance, wait at 

least 1 minute before opening or emptying 

the waste container. This way the dust can 

settle.



Raise the waste container slightly and 

pull it out.



Empty waste container.



Push in the waste container and lock it.



Empty opposite waste container.

Note:

 After switching off the appliance, the 

dust filter is automatically cleaned. Wait for 

approx. 2 minutes before opening the appli-

ance cover.



Set programme switch to step 1 (driv-

ing). The side brush and roller brush are 

raised.



Turn ignition key to "0" and remove it.



Close gas drawing valve by turning it in 

clock-wise direction. 



Danger

Risk of injury and damage! Observe the 

weight of the appliance when you transport 

it.



Danger

When loading the appliance, the freewheel 

lever must be in the lower position. Only 

then the travel drive and parking brake are 

ready for operation. The machine must al-

ways be moved up or down slopes by en-

gaging self-propulsion.



Turn ignition key to "0" and remove it.



Close gas drawing valve by turning it in 

clock-wise direction. 



Remove the gas bottle for transport and 

close it by means of the protective cap, 

refer to Chapter "Installing/replacing the 

gas bottle".



Secure the wheels of the machine with 

wheel chocks.



Secure the machine with tensioning 

straps or cables.



When transporting in vehicles, secure 

the appliance according to the guide-

lines from slipping and tipping over.

Note:

Observe markings for fixing points on 

base frame (chain symbols). When loading 

or unloading the machine, it may only be 

operated on gradients of max. 18%.



Danger

Risk of injury and damage! Note the weight 

of the appliance in case of storage.

If the sweeper is going to be out of service 

for a longer time period, observe the follow-

ing points:



Change engine oil.



Set programme switch to step 1 (driv-

ing). The roller brush and side brushes 

are raised to prevent the bristles being 

damaged.



Turn ignition key to "0" and remove it.



Close gas drawing valve by turning it in 

clock-wise direction. 

Unscrew the gas hose with union nut 

(use 30 mm spanner).

Lock the gas bottle with the safety cap 

and store upright in a suitable storage 

area (also see Chapter "Safety instruc-

tions).



Unscrew spark plugs and pour approx. 

3 cm 

3

 of oil into the spark plug holes. 

Crank the engine several times before 

replacing the spark plug. Screw in the 

spark plug.



Clean the inside and outside of the 

sweeper.



Park the sweeper on an even surface.



Park the machine in a safe and dry 

place.



Lock the sweeper to ensure that it does 

not roll off. 



Disconnect battery.



Charge battery approx. every 2 months.

Sweeping with sweep roller

Sweeping with bulk waste flap raised

Sweeping with side brushes

Sweeping dry floors

Sweep in fibrous and dry waste (such as 

dry grass, hay)

Sweeping damp or wet floors

Filter dedusting

Emptying waste container

Turn off the appliance

Closing the gas supply (gas engine)

Transport

Storage

Shutdown

23 EN