Vitek VT-1508 R: ENGLISH

ENGLISH

Be careful, the steam going out of the pipe is very hot.

• After removing the scale, clean the coffee machine with pure water for 2-3 times (see

section “Preparations before operation).

Trouble shooting

Malfunction Possible causes

- Make sure there is water in the tank (4).

- Switch the coffee machine on by the switcher (14), put the

cup under the steam nozzle (5), and turn on the steam sup-

ply by rotating the control handle (3) downwards to let the air

No hot water supply

out. When the steam starts going out of the nozzle (4), turn the

control handle (3) into OFF position (see Pic. 5).

- If after all these operations there is still no hot water supply, ap-

ply to the authorized service center.

- Depending on the grade of coffee powder grinding you can de-

termine from experience the degree of coffee powder ramming

in the filter (8).

- Check out whether the excessive amount of coffee powder is

Coffee is pouring over

blocking the appropriate position of the filter holder (9) while

the edges of the hold-

installation.

er (9)

- There are the crumbs of grinded coffee at the place of the hold-

er installation, remove them.

- If after all these operations coffee is still pouring over the filter

holder edges, apply to the authorized service center.

Technical specifications:

Power supply voltage: 220-230 V ~ 50 Hz

Power consumption: 1000 W

Water tank capacity: 1500 ml

Specifications subject to change without prior notice.

MINIMUM SERVICE LIFE - 3 YEARS

GUARANTEE

Details regarding guarantee conditions can be obtained from the dealer from whom the

appliance was purchased. The bill of sale or receipt must be produced when making any

claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council

Directive 89/336/EEC and to the Law Voltage Regulation (73/23 EEC)

7

1508.indd 71508.indd 7 15.05.2007 9:57:0915.05.2007 9:57:09