Vitek VT-1508 R: ENGLISH

ENGLISH

• Press the power ON/OFF button (14).

turn the steamer supply control handle

The indicator (13) will be lighted. The in-

(3) into OFF position (see Pic. 4).

dicator (12) keeps blinking until required

temperature is reached. Afterwards the

Attention!

indicator (12) will be deemed.

- Do not detach the filter holder (9) imme-

• Move the steam control handle (3) up-

diately after preparing coffee as there is

wards. When the cup is full turn the steam

redundant water vapor pressure inside.

control handle (3) into OFF position. Re-

peat the operation until the water tank (4)

Making cappuccino

is empty. The coffee machine is ready for

• You can whip cream or milk to make cap-

use (see Pic. 4).

puccino coffee, heat water to make some

tea or warm up any other beverages by

How to get good espresso

hot steam.

• Use the coffee powder intended special-

• Fill the tank (4) with water and install it

ly for the espresso coffee machines.

into the proper position (see Pic. 1).

• Ram the coffee powder in the filter slight-

• Switch the coffee machine on by press-

ly.

ing the button (14), and wait until the in-

• The strength and flavor of the coffee de-

dicator (12) is deemed.

pends upon sort and quality of the coffee

• Put the appropriate can for collecting the

beans, and also upon the grade of coffee

water under the steam outlet nozzle (5).

powder grinding. If coffee is pouring out

• Turn on the steam supply by rotating the

for too long this means the coffee powder

control handle (3) downwards to remove

is too fine or it is rammed too strongly.

the condensate out of the steam pipe.

After the condensate has been removed

Making espresso

set the control handle (3) into OFF posi-

• Insert the power cord plug into the wall

tion (see Pic. 5).

outlet.

• Fill the tank with cold milk (it is recom-

• Detach the tank (4), fill it with cold water

mended to use the milk containing 2% of

up to the MAX mark, and install the tank

fat) per one third.

into its former position (see Pic. 1).

• Put the steam nozzle (6) into the can

• Insert the filter (8) into the holder (9).

filled with milk, turn the control handle

• Fill the filter (8) with the coffee powder.

(3) downwards, the steam supply is on.

• Install the holder (9) into the installation

Several seconds are enough to make the

position (7) by rotating it to the right up to

thick foam. The steam nozzle (6) should

the stop (see Pic. 2).

not touch the bottom of the can. Other-

• Put the cup of the appropriate high on

wise the steam release would be blocked

the tray (11).

(see Pic. 6).

• Switch the coffee machine on by press-

ing the button (14). The indicator (13) is

Important: clean the steam pipe (5) imme-

lighted. The indicator (12) keeps blinking

diately after whipping the cream or milk:

until the set temperature is reached, af-

put any can for collecting the water under

terwards it will be deemed.

the steam nozzle, switch on the steam sup-

• The coffee machine is ready for prepar-

ply for several seconds by the control (3)

ing espresso.

(see Pic. 3).

• Turn the steamer supply control handle

Attention! Be aware of the hot steam go-

(3) upwards. After the cup has been filled

ing out to avoid skin burns.

5

5

1508.indd 51508.indd 5 15.05.2007 9:57:0915.05.2007 9:57:09