Vitek VT-3473 SR: инструкция
Инструкция к Магнитоле Vitek VT-3473 SR
RADIO CASSETTE RECORDER
with CD/MP3 PLAYER
MODEL VT3473 GY/VT3473 SR
INSTRUCTION MANUAL
3
11
19
28
www.vitekaus.com
3473.qxd 26.07.05 11:13 Page 1
3473.qxd 26.07.05 11:13 Page 2
ENGLISH
PRECAUTIONS
•
Ensure good air circulation.
•
Protect the unit from dust, moisture and water.
•
Please take good note of the following instructions:
•
Avoid strong magnetic fields, e.g. near TVs or Speakers
•
The unit must be connected to the power voltage which
for other units.
is the same as the local area. If not, there is a danger of
•
Avoid using strong chemical agents to clean.
"burning" the unit that causes a fire.
•
Do not grease or oil components, running mechanisms,
•
Do not expose to the temperature higher than 35OC.
etc. The CD player is designed to be maintenance free.
•
Avoid installation near heaters or in areas subjected to
•
Take the unit to approved service point for servicing.
direct sunlight.
The "exclamation point" calls attention to
CAUTION
features for which you should read the
RISK OF ELECTRIC SHOCK
enclosed literature closely to prevent
DO NOT OPEN
operating and maintenance problems.
This "bolt of lightning" indicates uninsulat
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
ed material within your unit which may
DO NOT REMOVE COVER.
NO USERSERVICEABLE PARTS INSIDE.
cause an electrical shock. For the safety of
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
everyone in your household, please do not
remove product covering.
CAUTION:
•
To avoid electric shock, this unit must not be exposed to dripping water or water splash.
•
Minimum distances around the apparatus for sufficient ventilation;
•
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths,
curtains, etc.
•
No naked flame sources, such as lighted candles, should be placed on the apparatus.
•
Before scrapping the appliance, remove the batteries and place them in the appropriate battery collection container.
CAUTION
LASER SAFETY
CLASS 1 LASER PRODUCT
This unit employs a laser. Only qualified service
Use of Controls or adjustments or performance
personnel should attempt repair.
of procedures other than those specified herein
may result in hazardous radiation exposure.
DANGER: INVISIBLE LASER
CLASS 1
RADIATION WHEN OPEN AND
LASER PRODUCT
INTERLOCK FAILED OR
DEFEATED. AVOID DIRECT
EXPOSURE TO BEAM.
CAUTION: HAZARDOUS LASER
RADIATION WHEN OPEN AND
INTERLOCK DEFEATED.
CAUTION
CLEANING: Always disconnect unit from power supply before attempting to clean it.
Use soft cloth moistened with soapy water, wipe gently.
Do not use solvents or abrasive materials.
3
3473.qxd 26.07.05 11:13 Page 3
ENGLISH
SOME DO'S AND DON'TS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet European safety standards but like any
electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
•
DO read the operating instructions before you attempt to use the equipment.
•
DO ensure that all electrical connections ( including the mains plug, extension leads and interconnections between piece
of equipment ) are properly made in accordance with the supplied instructions. Switch off and withdraw the mains plug
when making or changing connections.
•
DO consult your dealer if you are ever in doubt about the installation, operation, or safety of your equipment.
•
DO be careful with glass panels or doors on equipment.
•
DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged, in any way
switch off, withdraw the mains plug and consult your dealer.
•
DON'T remove any fixed cover as this may expose dangerous voltages.
•
DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattend
ed operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows
how to do this. Special arrangements may need to be made for infirm or handicapped people.
•
DON'T listen to headphones at high volume, as such use can permanently damage your hearing.
•
DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause
damage and shorten the life of the equipment.
•
DON'T allow electrical equipment to be exposed to rain or moisture.
Above all
•
NEVER let anyone, especially children, push anything into holes, slots or any other openings in the case. This could result
in a fatal electric shock.
•
NEVER guess or take chances with electrical equipment of any kind.
It is better to be safe than sorry!
Note : If energy saving lamps (Fluorescent) are used in the same room as the unit, erratic operation may occur.
4
3473.qxd 26.07.05 11:13 Page 4
ENGLISH
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
1. FM antenna
TURNING ON
2. CD compartment
1. Connect the power cord to the power cord jack (21).
3. Carrying handle
Connect the power cord plug to the power supply sock
4. Radio Tuning scale
et. Set the function switch (23) to the desired position
5. Open CD Compartment location
(CD, TAPE or RADIO).
6. Cassette mechanism control buttons: PAUSE,
2. To turn off the power, set the function switch (23) to
STOP/EJECT, F. FWR, REV, PLAY, REC
TAPE position.
7. BACK button (search backward)
8. NEXT button (search forward)
PLAYBACK
9. LED display
Volume Control
10. PLAY/PAUSE button.
After tuning to a desired radio station, turn the VOLUME
11. STOP button.
knob (22) to adjust the volume level as needed.
12. Speaker
13. FOLDER UP button (folder search forward)
LISTENING TO THE RADIO
14. FOLDER DN button (folder search backward)
1. Set the FUNCTION switch (23) into RADIO position.
15. Cassette compartment door
2. Set the Band Switch (19) to AM, FM or FM ST radio
16. PLAY MODE button.
band.
17. PROG button (Program)
3. Set the RADIO TUNING KNOB (20) to the desired radio
18. Speaker
station.
19. AM/FM/FM ST. band switch
4. When you have finished listening, set the function switch
20. Radio Tuning knob
(23) to TAPE position (OFF).
21. Power cord jack
22. Volume control
PLAYING COMPACT DISCS
23. CD/TAPE (OFF)/RADIO Function switch
24. Battery compartment cover/ Battery compartment
1. Set the Function switch (23) into CD position.
2. If there is no disc in the CD compartment or the disk is
inserted incorrectly, "no" will appear on the LED display.
Loading a CD
1. Open the CD compartment door (5).
2. Insert a disc, close the CD compartment door.
The system starts reading the disc.
Note: Make sure that the disc is inserted correctly.
Note: This device is CDR/RW compatible.
Playing CD
To start playing CD, press the PLAY/PAUSE button (10).
Pause during playback
Press the PLAY/PAUSE button during the playback, the play
back time will flash. Press the PLAY/PAUSE button again to
resume playback.
Stopping playback
Press the STOP button (11).
Searching tracks
Press the NEXT (8) or BACK (7) button to search forward or
backward.
5
3473.qxd 26.07.05 11:13 Page 5
ENGLISH
In play mode In stop mode
MP3 DISC PLAYBACK
9
Press once Press twice Press once
1. Set the Function switch (23) into CD position.
Back to the Previous track Previous track
2. If there is no disc inside, or the disc is damaged or
begining of
inserted incorrectly, "no" will appear on the LED display.
the current
track
Loading a Disc
:
Next track Next track
1. Open the CD compartment door (5).
2. Insert the disc and close the door.
The system starts reading the disc.
To search by music fragment, press and hold the NEXT but
Note: Make sure that the disc is inserted correctly.
ton (8) to search forward, or the BACK button (7) to search
This device supports CDR / RW discs.
backward.
NOTE: When searching by music fragment, the track will be
Playing Discs
played in the Fast Play mode.
1. Press the FOLDER UP or DN buttons (13) or (14) to
choose the desired folder.
To repeat a track or entire disc
2. To select the desired track, press the NEXT (7) or BACK
•
Press the PLAY MODE button (16), to activate the
(8) button.
REPEAT function for the current track.
3. To start playback, press the PLAY/PAUSE button (10).
•
Press the button again to activate the REPEAT ALL
tracks function.
Pause Playback
•
Turn off the REPEAT function by pressing the PLAY
To pause playback, press the PLAY/PAUSE button (10) dur
MODE button (16) again.
ing the disc playback. To resume playback, press the
PLAY/PAUSE button (10) again.
Random Playback Function
To activate the random playback mode, in the CD stop mode
Stop playback
press the PLAY MODE button (16) three times, ("RANDOM"
To stop playback, press the STOP button (11).
will appear on the LED display), after which press the
PLAY/PAUSE button (10). To turn off the function, press PLAY
MP3 PROGRAM PLAYBACK
MODE button (16) once again.
The player allows programming up to 10 MP3 tracks in any
order.
PROGRAM MODE
1. When the CD stop mode press the PROG button (17)
The device allows programming tracks (up to 20 tracks) in
once.
any order, first select the CD Stop mode by pressing the
2. Press FOLDER UP (13) or FOLDER DN (14) button to
STOP button.
select the needed folder.
1. Press the PROG button. (17) once. ("PROG" will flash on
3. Press the NEXT (8) or (7) button to select a track
the LED display.)
4. Again press the PROG button (17) to include the selected
2. Press the NEXT (8) or BACK (7) button to select a
track into the program.
desired track.
5. To continue programming, repeat the steps 2 and 3.
3. Press the PROG button. (17) to add the selected track to
Programming is finished
the program.
6. To start the program playback, press the PLAY/PAUSE
4. Continue programming, repeating steps 2 and 3.
button (10).
Programming is finished.
5. To start playback, press the PLAY/PAUSE button (10).
Viewing the program
Press the PROG. button (17). The numbers of programmed
Viewing the program
tracks will be shown on the display.
Press the PROG button. (17). Numbers of programmed
tracks will be shown on the LED display.
Clearing the program
To clear the program, press the STOP button (11) or open
Clearing the program
the CD compartment door..
To clear the program from the memory, press the STOP but
ton (11) twice or open the CD compartment door
6
3473.qxd 26.07.05 11:13 Page 6
ENGLISH
CASSETTE TAPE PLAYBACK
1. Set the Function switch (23) into TAPE position.
2. Press the STOP/EJECT button (6) to open the cassette door. Insert a tape and push the cassette door to close.
3. Press the PLAY (6) button to start playback.
Pause Playback
To pause playback, press the PAUSE button (6).
To resume playback, press the PAUSE button (8) again.
To Fast Forward or Rewind tape
Press the REW or F.FWD button (6).
RECORDING FROM RADIO
1. Set the Function switch (23) into RADIO position.
2. Repeat actions described in steps 2 and 3 in the Listening to the Radio section, to tune to the desired radio station.
3. Insert a clean tape and push the cassette door to close.
4. To start recording, press the REC and PLAY (6) buttons simultaneously.
5. Press the STOP/EJECT button to stop recording.
Note:
Return to Tape mode, rewind the tape to listen to recorded materials.
RECORDING FROM CD/MP3
1. Set the Function switch (23) into CD position, open the CD compartment door (5).
2. Insert the disc into the CD compartment and close the door.
3. Insert the tape and push the cassette door to close.
4. Press the RECORD and PLAY (6) buttons together.
5. To start CD / MP3 disc playback, press PLAY/PAUSE button (10).
6. To pause recording, press PAUSE button (6), to stop recording, press STOP/EJECT (6).
CARE AND MAINTENANCE
COMPACT DISC CARE
•
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny,
unprinted side of the disc.
•
Do not attach adhesive tape, stickers etc., to the disc label.
•
Clean the disc periodically with soft, lintfree, dry cloth. Never use detergents or adhesive cleaners to clean the disc. If
necessary, use a CD cleaning kit.
•
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).
•
When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the disc.
•
Never wipe in circular motions.
•
To remove a disc from its storage case, press down on the centre of the case and lift the disc out, holding it carefully by
the edges.
•
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth.
•
Unlike conventional records. compact disc have no grooves to collect dust and microscopic debris so gently wiping with
a soft cloth should remove most particles.
7
3473.qxd 26.07.05 11:13 Page 7
ENGLISH
TAPE HEAD CLEANING
The tape heads, pinch roller and capstan require periodic cleaning. This removes particles of the metal oxide
coating that wear off the tape and accumulate on these parts and impair performance. Switch off the power,
press the Stop/Eject Key to open the cassette door, and press the Play Key. Clean the tape heads, pinch roller
and capstan with a soft cloth or cotton swab dampened in isopropyl alcohol or special tape head cleaner.
NOTE: Never use any metal objects on or near the tape heads. Do not allow any cleaning material to fall into
the tape assembly.
CLEANING THE DEVICE
• To prevent fire or electric shock hazard, disconnect the device from the AC outlet before cleaning.
• Clean the unit surfaces with a soft dry cloth. Be careful when cleaning and wiping plastic parts.
• Clean speakers surfaces with a soft dry cloth. Do not apply wax or other polishing spray for cleaning the speakers.
• If the front panel becomes dirty, wipe it with a soft cloth slightly moistened with warm soap water. Never use for cleaning
any abrasives or polishing agents, as they can damage the unit surfaces.
CAUTION: During cleaning, do not allow water or other liquids to get inside the unit.
8
3473.qxd 26.07.05 11:13 Page 8
ENGLISH
TROUBLESHOOTING GUIDE
Before applying to a service center, please consult the following table.
9
3473.qxd 26.07.05 11:13 Page 9
ENGLISH
SPECIFICATIONS
Power supply 230 V 50Hz
8 x "C" /UM2 batteries
Power consumption 18W
Dimensions:
Main unit 260mm (W) x 147mm (H) x 232mm (D)
Operating temperature +535°C
RADIO
Reception bands AM (MW)/FM
Frequency bands AM (MW) 540 1600KHz
FM 64 108MHz
CD PLAYER
Playback system Digital audio player of compact discs
DAC 8 times over sampling
1 bit D/A converter
Reproduced frequency band 10020000 Hz
CASSETTE OPERATION
Recording system 4 tracks, 2 stereo channels
Magnetic bias system AC, magnetic erasure
Reproduced frequency band 125 6300 Hz
Detonation ratio 0.35% WRMS (JIS)
AUDIO
Output power 1.8 W x 2 (RMS)
Speakers impedance 8 Ohm
Headphones impedance 1632 Ohm
ACCESSORIES
Operating instructions 1
AC power cord: 1
Wire FM antenna (optional) 1
The manufacturer reserves the right to make changes to the technical characteristics of this device without prior notice.
Service life – no less than 5 years.
Guarantee
Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of
sale or receipt must be produced when making any claim under the terms of this guarantee.
This product conforms to the EMCRequirements as laid down by the Council Directive 89/336/EEC and to the Low
Voltage Regulation (23/73 EEC)
10
3473.qxd 26.07.05 11:13 Page 10
Оглавление
- ENGLISH
- DEUTSCH
- РУССКИЙ
- УКРАЇНЬСКИЙ