Vitek VT-1262 PK: инструкция
Инструкция к Утюгу Vitek VT-1262 PK
VT-1262 PK
Iron
Утюг
3
8
14
20
26
1
IM VT-1262.indd 1 10.06.2016 11:47:56
IM VT-1262.indd 2 10.06.2016 11:47:56
3
E N G L I S H
ATTENTION!
• Do not use the iron after dropping it, in case of visible
damages or leakage.
• Place the iron on a flat stable surface or use a stable
ironing board.
• Do not use the iron if the power plug or the power cord
is damaged or if there are other damages in the unit.
• Always take the power plug out of the mains socket
before filling the water tank with water.
• The water inlet lid should be closed during ironing.
• Attention! The surfaces of the iron get hot during operation.
To avoid burns, do not touch hot surfaces of the iron and
do not expose open parts of your body to outgoing steam.
• Pour out water from the water tank only after unplugging
the iron.
• Never leave the operating iron unattended.
• This unit is not intended for usage by children under
8 years of age. Place the unit out of reach of children
under 8 years of age during the operation and cooling
down.
• This unit is not intended for usage by people (including
children over 8) with physical, neural and mental
disorders or with insufficient experience or knowledge.
Such persons may use this unit only if they are under
supervision of a person who is responsible for their
safety and if they are given all the necessary and
understandable instructions concerning the safe usage
of the unit and information about danger that can be
caused by its improper usage.
• Water tank may contain water residue, this is normal, as
the iron has undergone factory quality control.
IM VT-1262.indd 3 10.06.2016 11:47:56
4
ENGLISH
IRON VT-1262 PK
•
Do not fill the water tank with scented liquids,
The iron is intended for ironing clothes and bed-
vinegar, starch solution, descaling reagents,
ding and for vertical steaming of fabrics.
chemicals, etc.
•
Do not switch the unit on in places where aero-
DESCRIPTION
sols are sprayed or highly flammable liquids
1.
Water spray
are used.
2.
Water inlet lid
•
Provide that the power cord is not on the iron-
3.
Continuous steam supply knob
ing board and make sure that it does not touch
4.
Burst of steam button
hot surfaces and sharp edges.
5.
Water spray button
•
Never leave the unit connected to the mains
6.
Handle
unattended. During breaks in operation, put
7.
Power cord protection
the iron on the base (in vertical position).
8.
Heating element pilot lamp
•
Before plugging/unplugging the iron, set the
9.
Base
temperature control knob to the minimum
10.
Water tank
position and switch the continuous steam sup-
11.
Temperature control knob
ply off.
12.
Self-clean button
•
Always unplug the iron if you are not using it.
13.
Maximum water level mark
•
Always take the power plug out of the mains
14.
Soleplate
socket before filling the water tank with water.
•
The water inlet lid should be closed during
ATTENTION!
ironing.
For additional protection it is reasonable to install
•
To unplug the iron, always hold the power plug,
a residual current device (RCD) with nominal
never pull the power cord.
operation current not exceeding 30 mA, to install
•
To avoid electric shock, do not immerse the
RCD, contact a specialist.
iron, the power cord and the plug into water or
any other liquids.
SAFETY MEASURES
•
Before taking the iron away, let it cool down
Before using the electrical unit, read this instruc-
completely and pour out the remaining water.
tion manual carefully and keep it for future refer-
•
Pour out water from the water tank only after
ence.
unplugging the iron.
Use the unit for its intended purpose only, as
•
Clean the unit regularly.
specified in this manual. Mishandling of the unit
•
Do not touch the unit body and the power
may lead to its breakage and cause harm to the
plug with wet hands.
user or damage to his/her property.
•
Do not allow children to touch the iron body
•
Before switching the unit on, make sure that
and the power cord during operation.
your home mains voltage corresponds to the
•
Do not leave children unattended to prevent
iron operating voltage.
using the unit as a toy.
•
The power cord is equipped with a «europlug»;
•
For children safety reasons do not leave poly-
plug it into the socket with a reliable ground-
ethylene bags, used as packaging, unat-
ing contact.
tended.
•
To avoid risk of fire, do not use adapters for
ATTENTION! Do not allow children to play with
plugging the unit in.
polyethylene bags or packaging film.
•
To avoid mains overloading, do not switch sev-
Danger of suffocation!
eral electrical appliances on with high power
•
Never use the unit if the power plug or the
consumption at a time.
power cord is damaged, if the iron works
•
Do not use the iron outdoors and in places with
improperly, after it was dropped or in case of
high humidity.
leakage.
•
Place the iron on a flat stable surface or use a
•
Do not attempt to repair the unit. Do not disas-
stable ironing board.
semble the unit by yourself, if any malfunction is
ATTENTION! The surfaces of the iron warm up
detected or after it was dropped, unplug the unit
during operation. Avoid contact of open skin
and apply to any authorized service center from
areas with the iron hot surfaces or outgoing steam
the contact address list given in the warranty
to avoid burns.
certificate and on the website www.vitek.ru.
IM VT-1262.indd 4 10.06.2016 11:47:56