Vitek VT-1210: инструкция
Характеристики, спецификации
Инструкция к Утюгу Vitek VT-1210
VT-1210.indd 1VT-1210.indd 1 22.07.2009 17:18:3422.07.2009 17:18:34
2
VT-1210.indd 2VT-1210.indd 2 22.07.2009 17:18:3622.07.2009 17:18:36
3
VT-1210.indd 3VT-1210.indd 3 22.07.2009 17:18:3622.07.2009 17:18:36
ENGLISH
STEAM IRON
• Close supervision is necessary when chil-
dren or infirm persons are near the unit.
DESCRIPTION
• Never leave the working unit unattend-
1. Water spray nozzle
ed.
2. Water tank lid
• Always unplug the unit if you do not use
3. Steam supply regulator
it.
4. Spray button
• In order to avoid electric shock do not
5. Additional steam release button
immerse the unit into water or other liq-
6. Handle
uids.
7. Power cord protection
• Do not fill the water tank with scented liq-
8. Base
uids, vinegar, starch solution, descaling
9. Heating element on/off indication
reagents, chemical agents etc.
10. Water tank
• Avoid contact with hot surfaces or out-
11. Temperature regulator
going steam of the iron in order to avoid
12. Maximal water level indication
getting burns.
13. Iron soleplateplateplate
• Make sure that the power cord is not
14. Self clean button
hanging over the edge of the ironing
15. Measuring cup
board and make sure that it does not
touch heated surfaces.
SAFETY MEASURES
• To unplug the unit always take it by the
Before using the unit, please read the
plug, do not pull by the power cord.
instructions carefully and pay attention
• Before taking the unit away for storage,
to the illustrations.
pour out the remaining water and let the
• Before switching on the unit, make sure
unit cool down.
that your home electricity supply corre-
• Pour out water only after you have un-
sponds to the voltage of current speci-
plugged the unit.
fied on the unit.
• Do not use the unit if the plug or the pow-
• Power cord is equipped with a euro plug;
er cord is damaged or if there are other
insert it into the socket, with secure
damages in the unit.
grounding.
• In order to avoid electric shock do not
• In order to avoid risk of fire do not use
repair the unit yourself. If there are some
adapters while connecting the appliance
damages in the unit apply to the author-
to the outlet.
ized service center.
• In order to avoid overloading of the pow-
er network do not switch on several ap-
BEFORE USAGE
pliances with high power consumption
• Take out the iron from the package and
simultaneously.
remove the protective cartoon covering
• Use the unit only for the intended pur-
from the iron soleplate (13).
poses.
• Make sure that the electrical supply volt-
• Use the iron only on the ironing board.
age corresponds to the iron's operating
• Place the iron on a flat stable surface.
voltage.
• Always unplug the unit while filling the
water tank with water.
Note:
• While using the unit, make sure that the
The iron's heating element is broken
water tank lid is firmly closed.
in during the first use; it is normal for a
small amount of smoke to be released.
4
VT-1210.indd 4VT-1210.indd 4 22.07.2009 17:18:3622.07.2009 17:18:36
ENGLISH
CHOICE OF WATER
Determination of Fabric type/tempera-
• To fill the water tank use regular tap wa-
ture
ter. If the water is hard then it is recom-
Synthetics, nylon, acryl, polyester
•
mended to mix it with distilled water at a
(low temperature)
ratio of 1:1, if the water is very hard, mix it
••
Silk/wool (medium temperature)
with distilled water at a ratio of 1:2 or use
•••
Cotton/linen (high temperature)
only distilled water.
• This table is only for smooth materials.
Note:
Fabrics of other types (crimped, raised
Do not fill the water tank (10) with
etc.) are best ironed at low temperature.
scented liquids, vinegar, starch solu-
• First sort items by ironing temperature:
tions, descaling reagents, chemical
wool with wool, cotton with cotton etc.
substances etc.
• The iron heats up faster than it cools
down. For this reason it is recommended
FILLING THE WATER TANK
to begin ironing at low temperature (for
Make sure that the iron is disconnected
instance synthetic fabrics). After that,
from electrical power before filling it with
move to higher temperature ironing.
water.
Cotton and linen should be ironed after
• Set the steam release regulator (3) to the
all the others.
position of steam vapor OFF.
• If an item is made from a mix of fabrics,
• Open the water tank lid (2).
then the iron should be set for the fab-
• Fill the water tank with water (10). Close
ric with the lowest ironing (for instance if
the lid (2).
an item is made from 60% polyester and
40% cotton, it should be ironed at the
Note:
temperature used for ironing polyester
• Do not fill it with water above MAX. in-
“•”).
dication.
• If you cannot define the fabric the item is
• If you need to refill the water tank dur-
made from, find a place on it that is hid-
ing ironing, turn off the iron and un-
den while wearing and, on practice select
plug the power cord from the outlet.
the ironing temperature (always start at
• When you finish ironing, open the
the lowest and gradually raise it until you
water tank lid (2) and pour out the re-
get the desired result.)
maining water.
• Corduroy and other fabrics that start
glossy quickly should be ironed strictly in
IRONING TEMPERATURE
one direction (along the lines) with slight
Before ironing test the heated iron on the
pressure.
old cloth to be sure that the iron soleplate
• To avoid appearance of glossy spots on
(13) and the water tank (10) are clean.
the synthetic and silk fabrics, iron them
• Always check the recommended iron
back-side.
temperature indicated on the tag before
ironing.
SETTING THE IRONING TEMPERATURE
• If the tag does not list the recommended
• Place the iron on the base (8).
ironing temperature, but you know the
• Insert the power plug into the outlet.
type of fabric, then use the following
• Set the temperature regulator (11) to the
table to determine the proper tempera-
required ironing temperature: “•”, “••”,
ture.
“•••” or “max” (depending on the type
5
VT-1210.indd 5VT-1210.indd 5 22.07.2009 17:18:3622.07.2009 17:18:36
Оглавление
- ENGLISH
- ENGLISH
- ENGLISH
- ENGLISH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- POLSKI
- POLSKI
- POLSKI
- POLSKI
- ČESKÝ
- ČESKÝ
- ČESKÝ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК