Vitek VT-3479 BK: инструкция

Radio cassette recorder

with CD/MP3 player

ENGLISH

MODEL VT-3479 R/BK

INSTRUCTION MANUAL

4

10

17

24

31

www.vitek-aus.com

1

3479.indd 13479.indd 1 11.04.2006 16:35:5111.04.2006 16:35:51

2

3479.indd 23479.indd 2 11.04.2006 16:36:1211.04.2006 16:36:12

3

3479.indd 33479.indd 3 11.04.2006 16:36:1311.04.2006 16:36:13

ENGLISH

Warning and inportance

 Make sure to hold the isolated terminal of

Please do not expose the unit to rain or moist

the plug to operate when connecting or

environment in case of fire or electric shock

pulling out the power cord.

 Turn off the power if you don’t use the unit,

Make sure to pull out the power plug if the

CAUTION

unit is not used for a long time or when

RISK OF ELECTRIC SHOCK

DO NOT OPEN

thundering or lightening.

 Do not place the unit in high-temperatur

e,vibrating,stuffy,environment or directly

WARNING : TO REDUCE THE RISK OF ELECTRIC

expose to sunlight. Do not put this unit

SHOCK, DO NOT REMOVE COVER (OR BACK).

together with high-power electric appliance

NO USER - SERVICEABLE PARTS INSIDE. REFER

to ensure good ventilation.

SERVICING TO QUALIFIED SERVICE PERSONNEL.

 Make sure the unit is far away from

fire,heating source and magnetic source.

Do not use alcohol, gasoline or any other

LASER SAFETY: This unit employs a laser. Only

chemical solvent to clean the unit.

qualified service personnel should attempt to

 Don’t spray any liquid or insert any object

service this device due to possible eye injury.

into the unit,Don’t disassembly the unit.

CAUTION: USE OF CONTROLS,

 Don’t use the unit in watery place or put

ADJUSTMENTS OR PERFORMANCE,

heavy objects on it.

PROCEDURE HEREIN MAY RESULT IN

 Take out the disk before moving the unit.

HAZARDOUS RADIAT ION EXPOSURE.

 Make sure to turn off the power and pull out

the plug when there is smoke or unusual

DANGEROUS VOLTAGE

The lightning flash with arrowhead symbol,

smell and make it serviced by professional

within an equilateral tri angle is intended

person.

to alert the user to the presence of

uninsulated dangerous voltage within the

1. VOLUME CONTROL

product s enclosure that may be of

2. REMOTE SENSOR

sufficie nt magnitude to constitute a risk of

3. FUNCTION SWITCH

electri c shock to persons.

4. CD BACK BUTTON

ATTENTION

5. PLAY/PAUSE BUTTON

The exclamation point within an equilateral

6. STOP BUTTON

Triangle is intended to alert the used to

7. CD NEXT BUTTON

the Presence of important operating and

8. BAND SWITCH

maintenance (servicing) instructions in the

9. PHONES

literature accompanying the appliance.

10. TELESCOPIC ANTENNA

Danger:

11. TUNING BUTTON

Invisible and hazardous laser radiation

12. BASS BUTTON

when Open and interlock failed or

13. POWER BUTTON

defeated. Avoid direct exposure to beam.

14. FM STEREO INDICATOR

15. CD DOOR

Dripping warning:

16. CD DOOR OPEN BUTTON

Ventilation warning use.

17. LCD DISPLAY

The product shall not be exposed to dripping or

18. REPEAT BUTTON

splashing and that no

19. RANDOM BUTTON

objects filled with liquids, such as vases, shall

20. CASSETTE RECORDER KEYS

be placed on the product.

PAUSE KEY ( )

The normal ventilation of the product shall not

STOP/EJECT KEY( )

be impeded for intended

F. FWD KEY()

Notice:

F. REWKEY()

 Please read through this manual before

PLAY KEY( )

using the unit

RECORDER()

 The unit can only be used with the power

21. CASSETTE DOOR

source the manual and the unit itself

22. AC MAINS

specified

23. BATTERIES DOOR

4

3479.indd 43479.indd 4 11.04.2006 16:36:1311.04.2006 16:36:13

ENGLISH

REMOTE CONTROL

1. PROGRAM-program and review programmed track numbers.

2-10.The remote control button s function is the same as the button of CD/MP3 section. Select the

CD tracks by (+10)/(-10) button.

INSTALL BATTERY

1. Open the battery cover to remote it.

2. Insert two (AAA) battery (not included) correctly so that the + and - polarities match the polarity

diagrams inside the battery compartment.

5

3479.indd 53479.indd 5 11.04.2006 16:36:1311.04.2006 16:36:13

ENGLISH

Top and front panels

-inlet for power cord

1. VOLUME

23. BATTERY DOOR

- adjust volume level.

-to open battery compartment.

2. REMOTE SENSOR

-remote control signal sensor

Power Supply

3. FUNCTION SELECT

Using AC Power

- select source of sound MP3/CD,

1. Check if the power voltage, as shown on the

TAPE or RADIO, also the power off switch.

type plate located on the bottom of the set,

4. CD BACK ()

corresponds to your local AC power supply.

CD: - Skip track backwards.

If it does not, consult your dealer or service

5. PLAY/PAUSE BUTTON ()

centre.

- start or pause MP3/CD play

2. Connect the power cord to the AC MAINS

6. STOP BUTTON

inlet and the wall outlet. The power supply

- stop CD playback; erase a CD program.

is now connected and ready for use.

7.

CD NEXT()

3. To switch off completely, unplug the power

CD: - Skip track forwards.

cord from the wall outlet.

8. BAND SELECTOR (AM FM FM ST.)

• Unplug the power cord from the wall

- select AM/FM/FM ST. Waveband.

outlet to protect your set during heavy

9. STEREO HEADPHONE JACK

thunderstorms.

- 3.5 mm stereo headphone jack.

10. TELESCOPIC ANTENNA

Batteries (not included)

- to improve FM reception

Open the battery compartment and insert

11. TUNING CONTROL

eight batteries, type R-14, UM-2 or C-cells,

- select AM/FM/FM ST. Stations.

(preferably Alkaline) with the correct polarity

12. BASS BUTTON

as indicated by the + a,,nd - s,,ymbols

- enhances bass response

inside the compartment.

13. POWER BUTTON

- Switch the system on or to standby mode.

Batteries contains chemical substances, so

14. FM STEREO INDICATOR

they should be disposed of properly.

- show the FM stereo indicator

Incorrect use of batteries can cause electrolyte

15. CD DOOR

leakage and will corrode the compartment

16. CD DOOR OPEN BUTTON

or cause the batteries to burst. Therefore:

- press here to open/close the CD door.

• Do not mix battery types: e.g. alkaline with

17. LCD DISPLAY

carbon Zinc. Only use batteries of the same

- show the AM/FM dial frequency

type for the set.

- show the number of tracks

• When inserting new batteries, do not try to

18. REPEAT BUTTON

mix old batteries with new ones.

- repeat a track CD/MP3 program

• Remove the batteries if the set is not be

19. RANDOM BUTTON

used for a long time.

CD: - play CD tracks in random order

20. CASSETTE RECORDER KEYS

BASIC FUNCTION

PAUSE KEY(- interrupt recording or STOP/

RADIO

EJECT KEYC

 - stop the tape - open

Switching power on/off: Save energy Whether

the cassette compartment

you are using mains or battery supply, to avoid

F. FWD KEY (-ativance the tape toward the

unnecessary energy consumption always adjust

end).

the source selector to off.

F. REW KEY (-Rewind the tape toward the

For FM, pull out the telescopic antenna. Incline

beginning.

and turn the antenna. Reduce its length if the

PLAYKEY ( ) -start playback

signal is too strong (very close to a transmitter).

RECORDER () - start recording

For AM, the set is provided with a built-in

21. CASSETTE COMPARTMENT

antenna so the telescopic antenna is not

-put into the cassette

needed. Direct the antenna by turning the whole

22. AC MAINS

set.

6

3479.indd 63479.indd 6 11.04.2006 16:36:1311.04.2006 16:36:13

ENGLISH

General operation

seconds, when the leader tape passes the

1. To select your sound source adjust the

recorder heads.

source to MP3/CD/TAPE/RADIO.

• To protect a tape from accidental erasure,

2. Adjust the sound with the VOLUME.

have the tape in front of you and break out

3. To switch off the set, adjust the source

the left tab.

selector to TAPE/off position.

Recording on this side is no longer possible.

To record over this side again, cover the

RADIO

tabs with a piece of adhesive tape.

Radio reception

1. Slide the FUNCTION selector to RADIO.

2. Slide the BAND selector to a desired

setting - FM STEREO, FM, AM.

3. Rotate the TUNING control to find the

desired stations.

NOTE: If the BAND selector is set to the FM

stereo position and you have tuned to an FM

stereo station, the FM stereo LED indicator

Recording from the radio

will light.

I. Tune to the desired radio station (See

4. When you have finished listening, slide the

TUNING TO RADIOSTATIONS).

FUNCTION selector to the OFF position to

2. Press STOP/EJECT to open the cassette

shut the power off.

door.

3. Insert a suitable cassette into the cassette

PLAYING A CASSETTE

deck and close the cassette door.

1. Select TAPE source.

4. Press RECORD to start recording.

2. Press STOP/EJECT to open the cassette

5. For brief interruptions, press PAUSE. To

door.

resume recording, press PAUSE again.

3 Insert a recorded cassette and close the

6. To stop recording, press STOP/EJECT.

cassette door.

4 Press PLAY to start playback.

MAINTENANCE

5 To interrupt playback, press PAUSE. To

Tape deck maintenance

resume, press the key again.

5. By pressing m or  on the set, fast

winding of the tape is possible in both

directions.

7. To stop the tape, press STOP/EJECT.

- The keys are automatically released at the

end of the tape, except if PAUSE has been

activated.

To ensure quality recording and playback of

the tape deck, clean parts A ,B andC shown in

GENERAL INFORMATION ON RECORDING

the diagram below, after approx. 50 hours of

• Recording is permissible in so far as

operation, or on average once a month. Use a

copyright or other rights of third parties are

cotton bud slightly moistened with alcohol or a

not infringed.

special head cleaning fluid to clean the deck.

• This deck is not suitable for recording on

I. Open the cassette door by pressing STOP/

CHROME (IEC II) orMETAL (IEC IV) type

EJECT.

cassettes. For recording, use NORMAL type

2. Press PLAY and clean the rubber pressure

cassettes (IEC I) on which the tabs have not

rollers C .

been broken.

3. Press PAUSE and clean the magnetic heads

• The best recording level is set automatically.

A and also the CapstanB.

Altering the VOLUME controls will not affect

4. After cleaning, press STOP/EJECT.

the recording in progress.

Note: Cleaning of the heads can also be done

• At the very beginning and end of the tape,

by playing a cleaning cassette through once.

no recording willtake place during the 7

7

3479.indd 73479.indd 7 11.04.2006 16:36:1311.04.2006 16:36:13

ENGLISH

CD/MP3 PLAYER

To Repeat All the Tracks

CD/MP3 Player Playing a CD/MP3

1. Press REPEAT button twice in play, CD RE-

ThisCD-playercan play Audio Discs,MP3 CD-R.

PEAT indicator on the display will be steady

Do not try to play CD-Rewritables,CD-ROM,

on in the display, all tracks on the disc will

CDi,VCD,DVD orcomputerCD.

be played over and over again till you press

1. Adjust the source selector to CD.

STOP button.

Display: shows - - Briefly.

2. To cancel repeat play, press REPEAT button

2. To open the CD door, press CD OPEN

once, CD REPEAT indicator goes off. Note:

button.

Repeat function also can be done in stop

3. Insert a CD or CD-R with the printed

mode.

side facing up and press CD Door

gently to close.

MAINTENANCE & SAFETY

4. To pause playback press . To resume,

Precautions & General Maintenance

press  again.

• Place the set on a hard and flat surface so

5. To stop CD playback, press STOP .

that the system does not tilt.

Note:CD/MP3 play will also stop when:

• Do not expose the set, batteries or CDs to

- you open the CD compartment;

humidity, rain, sand or excessive heat

- you select RADIO sound source;

caused by heating equipment or direct

-the CD/MP3 has reached to the end.

sunlight.

• Do not cover the set. Adequate ventilation

Selecting a different track

with a minimum gap of 6 inches between the

During playback you can use  or  to select a

ventilation holes and surrounding surfaces

particular track.

is necessary to prevent heat build-up.

• If you have selected a track number in the

• The mechanical parts of the set contain self-

stop or pause position, press  to start

lubricating bearings and must not be oiled

playback.

or lubricated.

• Press  once briefly for the next track, or

• To clean the set, use a soft dry cloth. Do not

press repeatedly until the desired track

use any cleaning agents containing alcohol,

number appears in the display.

ammonia, benzene or abrasives as these

• Press  once briefly to return to the

may harm the housing.

back track

CD player and CD handling

Finding a passage within a track

• The lens of the CD player should never be

1. Press and hold down  or 

touched!

• The CD is played at high speed and low vol-

• Sudden changes in the surrounding tem-

ume.

perature can cause condensation to form

2. When you recognize the passage you want

and the lens

release  or .

of your CD player to cloud over. Playing a

Normal playback resumes.

CD is then not possible. Do not attempt to

Playing tracks in random order After press

clean the lens but leave the set in a warm

the random button, the tracks will be played

environment until the moisture evaporates.

in random order

• Always close the CD door to keep the CD

compartment dust-free. To clean, dust the

CD REPEAT

compartment with a soft dry cloth.

You can play one track or all tracks on the

• To clean the CD, wipe in a straight line from

disc repeatedly. To Repeat a single Track1.

the centre towards the edge using a soft,

Press REPEAT button once in play, CD RE-

lint-free cloth. Do not use cleaning agents

PEAT indicator on the display will be flashing

as they may damage the disc.

in the display.

• Never write on a CD or attach any stickers to

The current track will be played over and

over again till you press STOP button.

2. To cancel repeat play, press REPEAT button

twice, CD REPEAT indicator goes off.

8

3479.indd 83479.indd 8 11.04.2006 16:36:1311.04.2006 16:36:13

ENGLISH

TROUBLESHOOTING

- Laser lens steamed up

If a fault occurs, first check the points listed be-

• Wait until lens has adjusted to room

low before taking the set for repair.

temperature

Do not open the set as there is a risk of electric

shock.

The CD/MP3 skips tracks

If you are unable to remedy a problem by follow-

- CD/MP3 damaged or dirty

ing these hints, consult your dealer or service

• Replace or clean CD/MP3

center.

- Program is active

WARNING: Under no circumstances should you

• Quit Program mode(s)

try to repair the set yourself, as this will in-

validate the warranty.

Environmental information

We have done our best to reduce the packaging

-No sound /power

and make it easy to separate into 3 materials:

- Volume not adjusted

cardboard, paper pulp and expandable polyeth-

• Adjust the VOLUME

ylene.

Your set consists of materials which can be

- power cord not securely connected

recycled if disassembled by a specialized

• Connect the AC power cord properly

company. Please observe the local regulations

regarding the disposal of packaging, dead bat-

- Batteries dead/ incorrectly inserted

teries and old equipment..

• Insert (fresh) batteries correctly

The manufacturer reserves the right to make

Display does not function properly / No re-

changes to the characteristics of the device

action to operation of any of the controls

without prior notice.

- Electrostatic discharge

• Switch off and unplug the set. Reconnect

The service life of the device is no less

after a few seconds

than five years.

Poor cassette sound quality

Guarantee

- Dust and dirt on the heads, etc.

Details regarding guarantee conditions can

• Clean deck parts etc., see Maintenance

be obtained from the dealer from whom the

- Use of incompatible cassette types (METAL

appliance was purchased. The bill of sale or

or CHROME)

receipt must be produced when making any

• Only use NORMAL (IEC I) for recording

claim under the terms of this guarantee.

Recording does not work

This product conforms to the EMC-

- Cassette tab(s) may be broken

Requirements as laid down by the

• Apply a piece of adhesive tape over the

Council Directive 89/336/EEC and

missing tab space

to the Low Voltage Regulation

(23/73 EEC)

no disc indication

- No CD/MP3 inserted

• Insert a CD,MP3, CD-R.

- CD badly scratched or dirty

• Replace/ clean CD, see Maintenance

- Laser lens steamed up

• Wait until lens has cleared

- CD-R is blank or the disc is not finalized

• Use a finalized CD-R

CD/MP3 playback does not work

CD/MP3 badly scratched/dirty

• Replace/clean CD/MP3 (see maintenance)

9

3479.indd 93479.indd 9 11.04.2006 16:36:1411.04.2006 16:36:14