Pioneer SBX-300: Appendix

Appendix 23

En

Chapter 6

English

Appendix

Specications

Unit

General

Power requirements AC 100 V to 240 V, 50 Hz/60 Hz

Power consumption 36 W

In Standby mode Less than 0.5 W

Without the height adjustment feet attached:

900 mm × 86 mm (front) × 121 mm

* Height at rear: 70 mm

Dimensions (W × H × D)

With the height adjustment feet attached:

900 mm × 106 mm (front) × 121 mm

* Height at rear: 90 mm

Net Weight 4.3 kg

Operating temperature 5 °C to 35 °C

Operating humidity 85 % or less

Inputs/Outputs

DIGITAL IN (OPTICAL) Optical jack x2

Coaxial digital input RCA terminal x1

Analog input 3.5-mm stereo mini jack x1

IR OUT 2.5-mm mini jack x1

Amplier

Practical maximum output

Total 130 W

Front 30W+30W(10%THD,4Ω)

Subwoofer 35W+35W(10%THD,4Ω)

Bluetooth

Version Ver.2.1 + EDR

Transmission output Class 2

Supported profile A2DP

PIN code 0000

Appendix24

En

Speakers

Front

Type Closed box type

Speakers 6.6 cm (cone type)

Impedance Rated 4Ω

Playback frequency band 100 Hz to 20 kHz

Subwoofer

Type Bass reflex type

Speakers 7.7 cm (cone type) × 2

Impedance Rated 4Ω

Playback frequency band 45 Hz to 2 kHz

• Design and specifications are subject to change without notice.

• All other product names, technology names, and company names contained in this document

are trademarks or registered trademarks of PIONEER or their respective companies.

Appendix 25

En

About condensation

Maintenance

English

If this unit is moved suddenly from a cold place

into a warm room (in winter, for example) or

Handling the unit

if the temperature in the room in which this

unit is installed rises suddenly due to heater

When shipping the unit

operation, etc., water droplets (condensation)

Please save the original shipping carton and

may form inside (on operating parts and the

packing materials. If you need to ship the unit,

lens). When condensation is present, this

for maximum protection, re-pack the unit as it

unit will not operate properly and playback

was originally packed at the factory.

is not possible. Let this unit stand at room

temperature for 1 or 2 hours with the power

Keeping the exterior surfaces clean

turned on (the time depends on the extent

• Do not use volatile liquids such as insecticide

of condensation). The water droplets will

spray near the unit.

dissipate and playback will become possible.

• Wiping with strong pressure may damage

Condensation can also occur in the summer if

the surface.

this unit is directly exposed to the air flow from

• Do not leave rubber or plastic products in

an air-conditioner. If this happens, move this

contact with the unit for a long period of

unit to a different place.

time.

Cleaning the this unit

Place of installation

• Unplug the power cord from the power outlet

• Do not place this unit on top of a TV or color

when cleaning this unit.

monitor. Also install it away from cassette

• Clean this unit using a soft cloth.

decks and other devices easily affected by

• For tough dirt, apply some neutral detergent

magnetic forces.

diluted in 5 to 6 parts water to a soft cloth,

Avoid the following locations:

wring out thoroughly, wipe off the dirt, and

• Places exposed to direct sunlight

then wipe again with a soft, dry cloth.

• Humid or poorly ventilated places

• Alcohol, thinner, benzene, insecticides,

• Extremely hot places

etc., could cause the print or paint to peel

• Places exposed to vibrations

off. Also, leaving rubber or vinyl products in

• Places in which there is much dust or

contact with this unit for long periods of time

cigarette smoke

could mar the cabinet.

• Places exposed to soot, steam or heat

• When using chemical-impregnated wipes,

(kitchens, etc.)

etc., read the cautions included with the

wipes carefully.

Do not place objects on this unit

Do not place any objects on top of this unit.

Do not obstruct the ventilation holes.

Do not use this unit on shaggy rugs, beds,

sofas, etc., or wrapped in cloth, etc. Doing so

will prevent the heat from dispersing, leading

to damage.

Do not expose to heat.

Do not place this unit on top of an amplifier or

other component that generates heat. When

rack mounting it, to avoid the heat given off by

the amplifier or other audio component, place

it on a shelf below the amplifier.

© 2013 PIONEER CORPORATION.

All rights reserved.