Vitek VT-1228: ENGLISH
ENGLISH: Vitek VT-1228
ENGLISH
est and gradually raise it until you get the
• Press the (7) button and lower the iron han-
desired result).
dle (4) down.
• Corduroy and other fabrics that start glossy
quickly should be ironed strictly in one di-
STEAM IRONING
rection (along the pile) with slight pressure.
While steam ironing set the temperature con-
• To avoid appearance of glossy spots on the
trol (11) to the “max” position.
synthetic and silk fabrics, iron them back-
• Fill the water tank with water as described in
side.
the corresponding section.
• Insert the power plug into the socket.
SETTING THE IRONING TEMPERATURE
• Set the temperature control (11) to the “max”
• Lift the handle (1) and it will lock, to lower
position, the indicator (10) will light up.
the handle (1) press the (7) button and low-
• Place the iron vertically.
er the handle
• When the sole temperature (9) reaches the
• Before connecting the iron to the electric
desired temperature value, the (10) indica-
network set the power supply switch (8)
tor will go out, you can start ironing.
in correspondence with the voltage of the
• Switch on constant steam supply, by setting
electric network. After usage of the iron with
the handle (12) to the left position (steam
network voltage 110 V always set the switch
supply is on); steam will be outgoing from
(8) to the 220 V position, it will prevent mal-
the openings of the iron sole (9).
function of the iron while connecting the iron
• Set the temperature control (11) to the “min”
to the electric network with the increased
position and the constant steam supply han-
voltage.
dle (12) to the “
” position (steam supply is
• Unwind the power cord and insert the plug
off).
into the socket.
• Take the plug out of the socket and wait until
• Set the temperature control (11) to the re-
the iron cools down completely.
quired ironing temperature: “•”, “••”,
• Open the lid (3) and pour out water from the
“•••”, “max” depending on the type of fab-
tank.
ric, the (10) indicator will light up.
• Press the button (7) and lower the handle
• Place the iron vertically.
(1) down.
• When the sole temperature (9) reaches the
desired temperature value, the (10) indica-
ATTENTION! If during the operation steam
tor will go out, you can start ironing.
is not constantly supplied, check whether the
temperature control (11) is set properly, check
Note: When using the unit for the first
the handle (12) position and whether there is
time, the heating element of the unit
water in the water tank (4).
burns that is why some smoke or foreign
odor can appear. It is normal.
ADDITIONAL STEAM RELEASE
Additional steam release function is useful
IRONING WITHOUT STEAM
when ironing folds and can only be used at
• Set the constant steam supply on/off han-
high ironing temperatures (when the iron tem-
dle (12) to the “
” (steam supply is off).
perature control (11) is set to “max”).
• Set the temperature control (11) to the re-
When the additional steam release button (2)
quired ironing temperature.
is pressed, steam will be vigorously released
• Place the iron vertically.
from the openings in the iron sole.
• When the sole temperature (9) reaches the
desired temperature value, the (7) indicator
Note:
will go out, you can start ironing.
- In order to avoid leakage of water from
• After operation, take the plug out of the
steam openings, press the additional
socket and wait until the iron cools down
steam supply button (2) with a 10-15
completely.
sec. interval.
5
1228.indd 51228.indd 5 29.03.2011 12:57:2129.03.2011 12:57:21
Оглавление
- ENGLISH
- ENGLISH
- ENGLISH
- ENGLISH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ROMÂNĂ/ MOLDOVENEASCĂ
- ROMÂNĂ/ MOLDOVENEASCĂ
- ROMÂNĂ/ MOLDOVENEASCĂ
- ROMÂNĂ/ MOLDOVENEASCĂ
- ČESKÝ
- ČESKÝ
- ČESKÝ
- ČESKÝ
- УКРАЇНСЬК А
- УКРАЇНСЬКА
- УКРАЇНСЬК А
- УКРАЇНСЬКА
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК