AEG MC 4421 CD-MP3 N: English

English

45

Automatic alarm interval

AUX IN socket

The automatically set alarm function can be switched off for

To connect analogue replay devices. Via this socket you can

about 9 minutes with the SNOOZE button (9).

also hear the sound of other playback devices such as MP3

NOTE:

players, CD players etc. through the loudspeakers.

The notification “AL” will blink in the display with an activat-

1. Pleaseconnecttheexternaldevicewitha3.5mmstereo

ed function.

jack plug to the AUX-IN socket.

2. Repeatedly press the FUNCTION button (7), until “AU” is

shown in the display.

Deactivating the alarm function

3. Youwillhearthesoundplaybackfromtheexternaldevice

Press the AL.SET button (5) repeatedly until the notification

through the loudspeakers. You may adjust the volume

“AL” goes out in the display.

with

/ (4). The CD buttons are not functional.

4. For the remaining procedure please see the operating

Cleaning and Maintenance

instructionsoftheexternalsoundsource.

NOTE:

WARNING:

Adjustthevolumeoftheexternaldevicetoacomfortable

Do not immerse the device in water.

level.

• Alwaysremovethemainsplugbeforecleaningthe

machine.

Alarm function

• Anymarksonthesurfacecanbewipedoffwithaslightly

damp cloth without any additives.

Setting the alarm time

1. Switch the device to standby with the

button.

Troubleshooting

2. Press the AL.SET button (5) for about 2 seconds. The

hours will blink in the display and the notification “AL”

Symptoms Course Solution

will be shown.

CD can not be

CD is not inserted or

Ensure that the disc is

3. Perform the settings with the



/



buttons.

played back.

inserted incorrectly.

inserted with the label

4. Confirm your entry with the AL.SET button. The minutes

facing upwards.

will blink in the display.

Batteries too weak. Insert new batteries

5. Perform the settings with the



/



buttons.

or operate the device

6. Press the AL.SET button again to store the alarm time.

with the mains lead.

CD jumps dur-

Check the disc for

Check the disc for

Setting the alarm time mode

ing playback.

fingerprints, dirt or

fingerprints, dirt or

You can be woken by the following modes:

scratches.

scratches.

- Signal tone (Buzzer): A bell symbol will be shown in the

Device cannot

Device crashes and

Disconnect the power

display. When the alarm time is reached, a signal tone will

be operated.

“hangs”.

supply for 5 sec. Then

sound.

switch the device on

- Radio: As soon as your set alarm time has been reached,

again.

the radio will turn on. The preset station will play.

- CD, USB or CARD: As soon as the set alarm time has

been reached, the device will turn on in the selected

Technical Data

mode.

Model: ............................................................MC 4421 N CD/MP3

NOTE:

Power supply: .............................................................230 V~, 50 Hz

• IfnoCDhasbeeninserted,orifnoUSBcardstorage

Power consumption:.................................................................10 W

medium has been connected, you will be woken by the

Protection class: ................................................................................ II

signal tone.

Net weight: ............................................................................. 1.46 kg

• Thevolumewillincreasetothefactorypresetvolumein

Radio section:

each alarm mode.

Frequency ranges: ...............................FM 87.5 ~ 108.0 MHz

1. Repeatedly press the AL.SET button to set the desired

The right to make technical and design modifications in

alarm mode.

the course of continuous product development remains

reserved.

Switching off the alarm signal

Press the

button (14) to switch off the alarm signal until the

following day.