AEG MC 4421 CD-MP3 N: English

42

English

Setting the time

WARNING:

Donotexposethebatteriestointenseheat,suchassun-

1. Switch the device to standby with the

button.

light, fire or similar. Danger of explosion!

2. Keep the TIME SET button (10) pressed for about 2

seconds. The notification “24H” will blink in the display.

CAUTION:

3. Use the



/



buttons (4) to choose between 24 hour or

• Batteriescanleakoutandlosebatteryacid.Ifthe

12 hour display.

device is not used for a long period of time, remove the

NOTE:

batteries from the device.

With the 12 hour display, the notification “PM” will ap-

• Differentbatterytypesornewandusedbatteriesmust

pear in the display in the afternoon.

not be used together.

• Batteriesmustnotbedisposedofinthegarbage.

4. Confirm your selection with the TIME SET button. The

Please bring used batteries to competent collection

hours will blink in the display.

centers or back to the dealer.

5. Perform the settings with the



/



buttons.

6. Confirm your selection with the TIME SET button. The

minutes will blink in the display.

Insert/Replace Battery in Remote Control

7. Perform the settings with the



/



buttons.

NOTE:

8. Press the TIME SET button again to store the time.

The lithium cell in the battery compartment of the remote

control was possibly secured with a foil for the transport.

General Operation

This prolongs the lifetime of the battery. Please remove this

foil before the first use to make the remote control ready

NOTE:

for operation.

• Youwillndsomebuttonsbothonthedeviceandon

• Openthebatterycompartmentontheundersideofthe

the remote control. Buttons with the same name have

remote.

the same function.

• Replacethecellwithabatteryofthesametype(CR2025).

• Theoperationofthedeviceisdescribedbythebuttons

Check that the polarity is correct (see battery compart-

of the remote control.

ment).

• Closethebatterycompartment.

Switch device on/off

If the remote is not in use for a lengthy period of time, please

With the

button (14), you can switch the unit between

remove the battery to prevent the battery acid from “leaking”.

standby and operating mode. The control lamp (9) will be lit

during standby.

WARNING:

• Donotexposethebatteriestointenseheat,suchas

NOTE: In CD, USB, CARD mode

sunlight, fire or similar. Danger of explosion!

After about 15 minutes without signal, or if the signal is too

• Keepbatteriesoutofthereachofchildren.Theyare

weak, the device will automatically switch to standby.

not toys.

• Donotforcebatteriesopen.

Volume

• Avoidcontactwithmetallicobjects.(Rings,nails,screws

By pressing the

/ buttons (4) you can adjust the

etc.) Danger of short circuits!

desired volume.

• Shortcircuitsmayoverheatorevenignitebatteries.

This may lead to combustion.

Infrared Remote Control

• Whentransportingthebatteries,covertheterminalsfor

For wireless control within a distance of 5 m. If this range de-

your safety with an adhesive strip.

creases, the battery has to be replaced. For proper operation

• Ifabatteryleaks,donotrubtheuidintotheeyesor

mind a clear view between the remote control and the sensor

the skin. If acid comes into contact with the eyes, rinse

on the device.

with purified water and seek medical advice if symp-

toms persist.

FUNCTION (7)

CAUTION:

Press the FUNCTION button until the desired operating

Batteries must not be disposed of in the garbage. Please

mode is shown on the display.

bring used batteries to competent collection centers or

back to the dealer.

(2)

For immediate muting of the volume. The notification in the

display will blink. Press

again to cancel the function.